software.amazon.awssdk.services.mediaconvert.model

Interface CmafGroupSettings.Builder

All Superinterfaces:

Buildable, CopyableBuilder<CmafGroupSettings.Builder,CmafGroupSettings>, SdkBuilder<CmafGroupSettings.Builder,CmafGroupSettings>, SdkPojo

Enclosing class:

CmafGroupSettings

public static interface CmafGroupSettings.Builder
extends SdkPojo, CopyableBuilder<CmafGroupSettings.Builder,CmafGroupSettings>

Method Summary

Modifier and Type	Method and Description
CmafGroupSettings.Builder	additionalManifests(CmafAdditionalManifest... additionalManifests) By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job.
CmafGroupSettings.Builder	additionalManifests(Collection<CmafAdditionalManifest> additionalManifests) By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job.
CmafGroupSettings.Builder	additionalManifests(Consumer<CmafAdditionalManifest.Builder>... additionalManifests) By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job.
CmafGroupSettings.Builder	baseUrl(String baseUrl) A partial URI prefix that will be put in the manifest file at the top level BaseURL element.
CmafGroupSettings.Builder	clientCache(CmafClientCache clientCache) Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag.
CmafGroupSettings.Builder	clientCache(String clientCache) Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag.
CmafGroupSettings.Builder	codecSpecification(CmafCodecSpecification codecSpecification) Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
CmafGroupSettings.Builder	codecSpecification(String codecSpecification) Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.
CmafGroupSettings.Builder	destination(String destination) Use Destination (Destination) to specify the S3 output location and the output filename base.
default CmafGroupSettings.Builder	destinationSettings(Consumer<DestinationSettings.Builder> destinationSettings) Settings associated with the destination.
CmafGroupSettings.Builder	destinationSettings(DestinationSettings destinationSettings) Settings associated with the destination.
CmafGroupSettings.Builder	encryption(CmafEncryptionSettings encryption) DRM settings.
default CmafGroupSettings.Builder	encryption(Consumer<CmafEncryptionSettings.Builder> encryption) DRM settings.
CmafGroupSettings.Builder	fragmentLength(Integer fragmentLength) Length of fragments to generate (in seconds).
CmafGroupSettings.Builder	manifestCompression(CmafManifestCompression manifestCompression) When set to GZIP, compresses HLS playlist.
CmafGroupSettings.Builder	manifestCompression(String manifestCompression) When set to GZIP, compresses HLS playlist.
CmafGroupSettings.Builder	manifestDurationFormat(CmafManifestDurationFormat manifestDurationFormat) Indicates whether the output manifest should use floating point values for segment duration.
CmafGroupSettings.Builder	manifestDurationFormat(String manifestDurationFormat) Indicates whether the output manifest should use floating point values for segment duration.
CmafGroupSettings.Builder	minBufferTime(Integer minBufferTime) Minimum time of initially buffered media that is needed to ensure smooth playout.
CmafGroupSettings.Builder	minFinalSegmentLength(Double minFinalSegmentLength) Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset.
CmafGroupSettings.Builder	mpdProfile(CmafMpdProfile mpdProfile) Specify whether your DASH profile is on-demand or main.
CmafGroupSettings.Builder	mpdProfile(String mpdProfile) Specify whether your DASH profile is on-demand or main.
CmafGroupSettings.Builder	ptsOffsetHandlingForBFrames(CmafPtsOffsetHandlingForBFrames ptsOffsetHandlingForBFrames) Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS).
CmafGroupSettings.Builder	ptsOffsetHandlingForBFrames(String ptsOffsetHandlingForBFrames) Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS).
CmafGroupSettings.Builder	segmentControl(CmafSegmentControl segmentControl) When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length.
CmafGroupSettings.Builder	segmentControl(String segmentControl) When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length.
CmafGroupSettings.Builder	segmentLength(Integer segmentLength) Use this setting to specify the length, in seconds, of each individual CMAF segment.
CmafGroupSettings.Builder	streamInfResolution(CmafStreamInfResolution streamInfResolution) Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
CmafGroupSettings.Builder	streamInfResolution(String streamInfResolution) Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
CmafGroupSettings.Builder	writeDashManifest(CmafWriteDASHManifest writeDashManifest) When set to ENABLED, a DASH MPD manifest will be generated for this output.
CmafGroupSettings.Builder	writeDashManifest(String writeDashManifest) When set to ENABLED, a DASH MPD manifest will be generated for this output.
CmafGroupSettings.Builder	writeHlsManifest(CmafWriteHLSManifest writeHlsManifest) When set to ENABLED, an Apple HLS manifest will be generated for this output.
CmafGroupSettings.Builder	writeHlsManifest(String writeHlsManifest) When set to ENABLED, an Apple HLS manifest will be generated for this output.
CmafGroupSettings.Builder	writeSegmentTimelineInRepresentation(CmafWriteSegmentTimelineInRepresentation writeSegmentTimelineInRepresentation) When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations.
CmafGroupSettings.Builder	writeSegmentTimelineInRepresentation(String writeSegmentTimelineInRepresentation) When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations.

Methods inherited from interface software.amazon.awssdk.core.SdkPojo

equalsBySdkFields, sdkFields

Methods inherited from interface software.amazon.awssdk.utils.builder.CopyableBuilder

copy

Methods inherited from interface software.amazon.awssdk.utils.builder.SdkBuilder

applyMutation, build

Method Detail

additionalManifests

CmafGroupSettings.Builder additionalManifests(Collection<CmafAdditionalManifest> additionalManifests)

By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.

Parameters:

additionalManifests - By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.

Returns:

Returns a reference to this object so that method calls can be chained together.

additionalManifests

CmafGroupSettings.Builder additionalManifests(CmafAdditionalManifest... additionalManifests)

By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.

Parameters:

additionalManifests - By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest.

Returns:

Returns a reference to this object so that method calls can be chained together.

additionalManifests

CmafGroupSettings.Builder additionalManifests(Consumer<CmafAdditionalManifest.Builder>... additionalManifests)

By default, the service creates one top-level .m3u8 HLS manifest and one top -level .mpd DASH manifest for each CMAF output group in your job. These default manifests reference every output in the output group. To create additional top-level manifests that reference a subset of the outputs in the output group, specify a list of them here. For each additional manifest that you specify, the service creates one HLS manifest and one DASH manifest. This is a convenience that creates an instance of the .Builder avoiding the need to create one manually via #builder(). When the Consumer completes, List.Builder#build() is called immediately and its result is passed to #additionalManifests(List).

Parameters:

additionalManifests - a consumer that will call methods on List.Builder

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

#additionalManifests(List)

baseUrl

CmafGroupSettings.Builder baseUrl(String baseUrl)

A partial URI prefix that will be put in the manifest file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.

Parameters:

baseUrl - A partial URI prefix that will be put in the manifest file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.

Returns:

Returns a reference to this object so that method calls can be chained together.

clientCache

CmafGroupSettings.Builder clientCache(String clientCache)

Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.

Parameters:

clientCache - Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafClientCache, CmafClientCache

clientCache

CmafGroupSettings.Builder clientCache(CmafClientCache clientCache)

Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.

Parameters:

clientCache - Disable this setting only when your workflow requires the #EXT-X-ALLOW-CACHE:no tag. Otherwise, keep the default value Enabled (ENABLED) and control caching in your video distribution set up. For example, use the Cache-Control http header.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafClientCache, CmafClientCache

codecSpecification

CmafGroupSettings.Builder codecSpecification(String codecSpecification)

Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.

Parameters:

codecSpecification - Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafCodecSpecification, CmafCodecSpecification

codecSpecification

CmafGroupSettings.Builder codecSpecification(CmafCodecSpecification codecSpecification)

Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.

Parameters:

codecSpecification - Specification to use (RFC-6381 or the default RFC-4281) during m3u8 playlist generation.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafCodecSpecification, CmafCodecSpecification

destination

CmafGroupSettings.Builder destination(String destination)

Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.

Parameters:

destination - Use Destination (Destination) to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.

Returns:

Returns a reference to this object so that method calls can be chained together.

destinationSettings

CmafGroupSettings.Builder destinationSettings(DestinationSettings destinationSettings)

Settings associated with the destination. Will vary based on the type of destination

Parameters:

destinationSettings - Settings associated with the destination. Will vary based on the type of destination

Returns:

Returns a reference to this object so that method calls can be chained together.

destinationSettings

default CmafGroupSettings.Builder destinationSettings(Consumer<DestinationSettings.Builder> destinationSettings)

Settings associated with the destination. Will vary based on the type of destination This is a convenience that creates an instance of the DestinationSettings.Builder avoiding the need to create one manually via DestinationSettings.builder(). When the Consumer completes, SdkBuilder.build() is called immediately and its result is passed to destinationSettings(DestinationSettings).

Parameters:

destinationSettings - a consumer that will call methods on DestinationSettings.Builder

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

destinationSettings(DestinationSettings)

encryption

CmafGroupSettings.Builder encryption(CmafEncryptionSettings encryption)

DRM settings.

Parameters:

encryption - DRM settings.

Returns:

Returns a reference to this object so that method calls can be chained together.

encryption

default CmafGroupSettings.Builder encryption(Consumer<CmafEncryptionSettings.Builder> encryption)

DRM settings. This is a convenience that creates an instance of the CmafEncryptionSettings.Builder avoiding the need to create one manually via CmafEncryptionSettings.builder(). When the Consumer completes, SdkBuilder.build() is called immediately and its result is passed to encryption(CmafEncryptionSettings).

Parameters:

encryption - a consumer that will call methods on CmafEncryptionSettings.Builder

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

encryption(CmafEncryptionSettings)

fragmentLength

CmafGroupSettings.Builder fragmentLength(Integer fragmentLength)

Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.

Parameters:

fragmentLength - Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.

Returns:

Returns a reference to this object so that method calls can be chained together.

manifestCompression

CmafGroupSettings.Builder manifestCompression(String manifestCompression)

When set to GZIP, compresses HLS playlist.

Parameters:

manifestCompression - When set to GZIP, compresses HLS playlist.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafManifestCompression, CmafManifestCompression

manifestCompression

CmafGroupSettings.Builder manifestCompression(CmafManifestCompression manifestCompression)

When set to GZIP, compresses HLS playlist.

Parameters:

manifestCompression - When set to GZIP, compresses HLS playlist.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafManifestCompression, CmafManifestCompression

manifestDurationFormat

CmafGroupSettings.Builder manifestDurationFormat(String manifestDurationFormat)

Indicates whether the output manifest should use floating point values for segment duration.

Parameters:

manifestDurationFormat - Indicates whether the output manifest should use floating point values for segment duration.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafManifestDurationFormat, CmafManifestDurationFormat

manifestDurationFormat

CmafGroupSettings.Builder manifestDurationFormat(CmafManifestDurationFormat manifestDurationFormat)

Indicates whether the output manifest should use floating point values for segment duration.

Parameters:

manifestDurationFormat - Indicates whether the output manifest should use floating point values for segment duration.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafManifestDurationFormat, CmafManifestDurationFormat

minBufferTime

CmafGroupSettings.Builder minBufferTime(Integer minBufferTime)

Minimum time of initially buffered media that is needed to ensure smooth playout.

Parameters:

minBufferTime - Minimum time of initially buffered media that is needed to ensure smooth playout.

Returns:

Returns a reference to this object so that method calls can be chained together.

minFinalSegmentLength

CmafGroupSettings.Builder minFinalSegmentLength(Double minFinalSegmentLength)

Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.

Parameters:

minFinalSegmentLength - Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.

Returns:

Returns a reference to this object so that method calls can be chained together.

mpdProfile

CmafGroupSettings.Builder mpdProfile(String mpdProfile)

Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).

Parameters:

mpdProfile - Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafMpdProfile, CmafMpdProfile

mpdProfile

CmafGroupSettings.Builder mpdProfile(CmafMpdProfile mpdProfile)

Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).

Parameters:

mpdProfile - Specify whether your DASH profile is on-demand or main. When you choose Main profile (MAIN_PROFILE), the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand (ON_DEMAND_PROFILE), the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control (SegmentControl) to Single file (SINGLE_FILE).

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafMpdProfile, CmafMpdProfile

ptsOffsetHandlingForBFrames

CmafGroupSettings.Builder ptsOffsetHandlingForBFrames(String ptsOffsetHandlingForBFrames)

Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.

Parameters:

ptsOffsetHandlingForBFrames - Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafPtsOffsetHandlingForBFrames, CmafPtsOffsetHandlingForBFrames

ptsOffsetHandlingForBFrames

CmafGroupSettings.Builder ptsOffsetHandlingForBFrames(CmafPtsOffsetHandlingForBFrames ptsOffsetHandlingForBFrames)

Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.

Parameters:

ptsOffsetHandlingForBFrames - Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS (MATCH_INITIAL_PTS) when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based (ZERO_BASED) to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafPtsOffsetHandlingForBFrames, CmafPtsOffsetHandlingForBFrames

segmentControl

CmafGroupSettings.Builder segmentControl(String segmentControl)

When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.

Parameters:

segmentControl - When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafSegmentControl, CmafSegmentControl

segmentControl

CmafGroupSettings.Builder segmentControl(CmafSegmentControl segmentControl)

When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.

Parameters:

segmentControl - When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafSegmentControl, CmafSegmentControl

segmentLength

CmafGroupSettings.Builder segmentLength(Integer segmentLength)

Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.

Parameters:

segmentLength - Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.

Returns:

Returns a reference to this object so that method calls can be chained together.

streamInfResolution

CmafGroupSettings.Builder streamInfResolution(String streamInfResolution)

Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.

Parameters:

streamInfResolution - Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafStreamInfResolution, CmafStreamInfResolution

streamInfResolution

CmafGroupSettings.Builder streamInfResolution(CmafStreamInfResolution streamInfResolution)

Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.

Parameters:

streamInfResolution - Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafStreamInfResolution, CmafStreamInfResolution

writeDashManifest

CmafGroupSettings.Builder writeDashManifest(String writeDashManifest)

When set to ENABLED, a DASH MPD manifest will be generated for this output.

Parameters:

writeDashManifest - When set to ENABLED, a DASH MPD manifest will be generated for this output.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafWriteDASHManifest, CmafWriteDASHManifest

writeDashManifest

CmafGroupSettings.Builder writeDashManifest(CmafWriteDASHManifest writeDashManifest)

When set to ENABLED, a DASH MPD manifest will be generated for this output.

Parameters:

writeDashManifest - When set to ENABLED, a DASH MPD manifest will be generated for this output.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafWriteDASHManifest, CmafWriteDASHManifest

writeHlsManifest

CmafGroupSettings.Builder writeHlsManifest(String writeHlsManifest)

When set to ENABLED, an Apple HLS manifest will be generated for this output.

Parameters:

writeHlsManifest - When set to ENABLED, an Apple HLS manifest will be generated for this output.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafWriteHLSManifest, CmafWriteHLSManifest

writeHlsManifest

CmafGroupSettings.Builder writeHlsManifest(CmafWriteHLSManifest writeHlsManifest)

When set to ENABLED, an Apple HLS manifest will be generated for this output.

Parameters:

writeHlsManifest - When set to ENABLED, an Apple HLS manifest will be generated for this output.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafWriteHLSManifest, CmafWriteHLSManifest

writeSegmentTimelineInRepresentation

CmafGroupSettings.Builder writeSegmentTimelineInRepresentation(String writeSegmentTimelineInRepresentation)

When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.

Parameters:

writeSegmentTimelineInRepresentation - When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafWriteSegmentTimelineInRepresentation, CmafWriteSegmentTimelineInRepresentation

writeSegmentTimelineInRepresentation

CmafGroupSettings.Builder writeSegmentTimelineInRepresentation(CmafWriteSegmentTimelineInRepresentation writeSegmentTimelineInRepresentation)

When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.

Parameters:

writeSegmentTimelineInRepresentation - When you enable Precise segment duration in DASH manifests (writeSegmentTimelineInRepresentation), your DASH manifest shows precise segment durations. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When this feature isn't enabled, the segment durations in your DASH manifest are approximate. The segment duration information appears in the duration attribute of the SegmentTemplate element.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

CmafWriteSegmentTimelineInRepresentation, CmafWriteSegmentTimelineInRepresentation