public static interface ProresSettings.Builder extends SdkPojo, CopyableBuilder<ProresSettings.Builder,ProresSettings>
| Modifier and Type | Method and Description |
|---|---|
ProresSettings.Builder |
codecProfile(ProresCodecProfile codecProfile)
Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
|
ProresSettings.Builder |
codecProfile(String codecProfile)
Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.
|
ProresSettings.Builder |
framerateControl(ProresFramerateControl framerateControl)
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
ProresSettings.Builder |
framerateControl(String framerateControl)
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
ProresSettings.Builder |
framerateConversionAlgorithm(ProresFramerateConversionAlgorithm framerateConversionAlgorithm)
Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
|
ProresSettings.Builder |
framerateConversionAlgorithm(String framerateConversionAlgorithm)
Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
|
ProresSettings.Builder |
framerateDenominator(Integer framerateDenominator)
When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
|
ProresSettings.Builder |
framerateNumerator(Integer framerateNumerator)
When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
|
ProresSettings.Builder |
interlaceMode(ProresInterlaceMode interlaceMode)
Choose the scan line type for the output.
|
ProresSettings.Builder |
interlaceMode(String interlaceMode)
Choose the scan line type for the output.
|
ProresSettings.Builder |
parControl(ProresParControl parControl)
Optional.
|
ProresSettings.Builder |
parControl(String parControl)
Optional.
|
ProresSettings.Builder |
parDenominator(Integer parDenominator)
Required when you set Pixel aspect ratio (parControl) to SPECIFIED.
|
ProresSettings.Builder |
parNumerator(Integer parNumerator)
Required when you set Pixel aspect ratio (parControl) to SPECIFIED.
|
ProresSettings.Builder |
scanTypeConversionMode(ProresScanTypeConversionMode scanTypeConversionMode)
Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
|
ProresSettings.Builder |
scanTypeConversionMode(String scanTypeConversionMode)
Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
|
ProresSettings.Builder |
slowPal(ProresSlowPal slowPal)
Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
|
ProresSettings.Builder |
slowPal(String slowPal)
Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
|
ProresSettings.Builder |
telecine(ProresTelecine telecine)
When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type
is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture.
|
ProresSettings.Builder |
telecine(String telecine)
When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type
is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture.
|
equalsBySdkFields, sdkFieldscopyapplyMutation, buildProresSettings.Builder codecProfile(String codecProfile)
codecProfile - Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.ProresCodecProfile,
ProresCodecProfileProresSettings.Builder codecProfile(ProresCodecProfile codecProfile)
codecProfile - Use Profile (ProResCodecProfile) to specify the type of Apple ProRes codec to use for this output.ProresCodecProfile,
ProresCodecProfileProresSettings.Builder framerateControl(String framerateControl)
framerateControl - If you are using the console, use the Framerate setting to specify the frame rate for this output. If
you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame
rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in
the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame
rate as a fraction. If you are creating your transcoding job specification as a JSON file without the
console, use FramerateControl to specify which value the service uses for the frame rate for this
output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input.
Choose SPECIFIED if you want the service to use the frame rate you specify in the settings
FramerateNumerator and FramerateDenominator.ProresFramerateControl,
ProresFramerateControlProresSettings.Builder framerateControl(ProresFramerateControl framerateControl)
framerateControl - If you are using the console, use the Framerate setting to specify the frame rate for this output. If
you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame
rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in
the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame
rate as a fraction. If you are creating your transcoding job specification as a JSON file without the
console, use FramerateControl to specify which value the service uses for the frame rate for this
output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input.
Choose SPECIFIED if you want the service to use the frame rate you specify in the settings
FramerateNumerator and FramerateDenominator.ProresFramerateControl,
ProresFramerateControlProresSettings.Builder framerateConversionAlgorithm(String framerateConversionAlgorithm)
framerateConversionAlgorithm - Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We
recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to
30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter.
This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame
rate conversions, especially if your source video has already been converted from its original
cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the
best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and
incurs a significant add-on cost.ProresFramerateConversionAlgorithm,
ProresFramerateConversionAlgorithmProresSettings.Builder framerateConversionAlgorithm(ProresFramerateConversionAlgorithm framerateConversionAlgorithm)
framerateConversionAlgorithm - Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We
recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to
30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter.
This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame
rate conversions, especially if your source video has already been converted from its original
cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the
best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and
incurs a significant add-on cost.ProresFramerateConversionAlgorithm,
ProresFramerateConversionAlgorithmProresSettings.Builder framerateDenominator(Integer framerateDenominator)
framerateDenominator - When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a
fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator
of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the
console for transcode jobs that use frame rate conversion, provide the value as a decimal number for
Framerate. In this example, specify 23.976.ProresSettings.Builder framerateNumerator(Integer framerateNumerator)
framerateNumerator - When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a
fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of
this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the
console for transcode jobs that use frame rate conversion, provide the value as a decimal number for
Framerate. In this example, specify 23.976.ProresSettings.Builder interlaceMode(String interlaceMode)
interlaceMode - Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create
a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or
Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity
throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD)
to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the
output field polarity might change over the course of the output. Follow behavior depends on the input
scan type. If the source is interlaced, the output will be interlaced with the same polarity as the
source. If the source is progressive, the output will be interlaced with top field bottom field first,
depending on which of the Follow options you choose.ProresInterlaceMode,
ProresInterlaceModeProresSettings.Builder interlaceMode(ProresInterlaceMode interlaceMode)
interlaceMode - Choose the scan line type for the output. Keep the default value, Progressive (PROGRESSIVE) to create
a progressive output, regardless of the scan type of your input. Use Top field first (TOP_FIELD) or
Bottom field first (BOTTOM_FIELD) to create an output that's interlaced with the same field polarity
throughout. Use Follow, default top (FOLLOW_TOP_FIELD) or Follow, default bottom (FOLLOW_BOTTOM_FIELD)
to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the
output field polarity might change over the course of the output. Follow behavior depends on the input
scan type. If the source is interlaced, the output will be interlaced with the same polarity as the
source. If the source is progressive, the output will be interlaced with top field bottom field first,
depending on which of the Follow options you choose.ProresInterlaceMode,
ProresInterlaceModeProresSettings.Builder parControl(String parControl)
parControl - Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default
behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output.
To specify a different PAR in the console, choose any value other than Follow source. To specify a
different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for
this setting, you must also specify values for the parNumerator and parDenominator settings.ProresParControl,
ProresParControlProresSettings.Builder parControl(ProresParControl parControl)
parControl - Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default
behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output.
To specify a different PAR in the console, choose any value other than Follow source. To specify a
different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for
this setting, you must also specify values for the parNumerator and parDenominator settings.ProresParControl,
ProresParControlProresSettings.Builder parDenominator(Integer parDenominator)
parDenominator - Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds
to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is
different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC
widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.ProresSettings.Builder parNumerator(Integer parNumerator)
parNumerator - Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds
to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is
different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC
widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.ProresSettings.Builder scanTypeConversionMode(String scanTypeConversionMode)
scanTypeConversionMode - Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality
interlaced output. In this case, each progressive frame from the input corresponds to an interlaced
field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output
frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then
interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a
value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic
interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None
(NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also
set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).ProresScanTypeConversionMode,
ProresScanTypeConversionModeProresSettings.Builder scanTypeConversionMode(ProresScanTypeConversionMode scanTypeConversionMode)
scanTypeConversionMode - Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality
interlaced output. In this case, each progressive frame from the input corresponds to an interlaced
field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output
frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then
interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a
value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic
interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None
(NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also
set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).ProresScanTypeConversionMode,
ProresScanTypeConversionModeProresSettings.Builder slowPal(String slowPal)
slowPal - Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow
PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25
fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting
will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.
In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and
(framerateDenominator) to 1.ProresSlowPal,
ProresSlowPalProresSettings.Builder slowPal(ProresSlowPal slowPal)
slowPal - Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow
PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25
fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting
will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.
In your JSON job specification, set (framerateControl) to (SPECIFIED), (framerateNumerator) to 25 and
(framerateDenominator) to 1.ProresSlowPal,
ProresSlowPalProresSettings.Builder telecine(String telecine)
telecine - When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output
scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture.
When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to
29.97 without doing anything with the field polarity to create a smoother picture.ProresTelecine,
ProresTelecineProresSettings.Builder telecine(ProresTelecine telecine)
telecine - When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output
scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture.
When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to
29.97 without doing anything with the field polarity to create a smoother picture.ProresTelecine,
ProresTelecineCopyright © 2021. All rights reserved.