public static interface Vc3Settings.Builder extends SdkPojo, CopyableBuilder<Vc3Settings.Builder,Vc3Settings>
| Modifier and Type | Method and Description |
|---|---|
Vc3Settings.Builder |
framerateControl(String framerateControl)
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
Vc3Settings.Builder |
framerateControl(Vc3FramerateControl framerateControl)
If you are using the console, use the Framerate setting to specify the frame rate for this output.
|
Vc3Settings.Builder |
framerateConversionAlgorithm(String framerateConversionAlgorithm)
Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
|
Vc3Settings.Builder |
framerateConversionAlgorithm(Vc3FramerateConversionAlgorithm framerateConversionAlgorithm)
Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
|
Vc3Settings.Builder |
framerateDenominator(Integer framerateDenominator)
When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
|
Vc3Settings.Builder |
framerateNumerator(Integer framerateNumerator)
When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
|
Vc3Settings.Builder |
interlaceMode(String interlaceMode)
Optional.
|
Vc3Settings.Builder |
interlaceMode(Vc3InterlaceMode interlaceMode)
Optional.
|
Vc3Settings.Builder |
scanTypeConversionMode(String scanTypeConversionMode)
Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
|
Vc3Settings.Builder |
scanTypeConversionMode(Vc3ScanTypeConversionMode scanTypeConversionMode)
Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
|
Vc3Settings.Builder |
slowPal(String slowPal)
Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
|
Vc3Settings.Builder |
slowPal(Vc3SlowPal slowPal)
Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps).
|
Vc3Settings.Builder |
telecine(String telecine)
When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type
is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture.
|
Vc3Settings.Builder |
telecine(Vc3Telecine telecine)
When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type
is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture.
|
Vc3Settings.Builder |
vc3Class(String vc3Class)
Specify the VC3 class to choose the quality characteristics for this output.
|
Vc3Settings.Builder |
vc3Class(Vc3Class vc3Class)
Specify the VC3 class to choose the quality characteristics for this output.
|
equalsBySdkFields, sdkFieldscopyapplyMutation, buildVc3Settings.Builder framerateControl(String framerateControl)
framerateControl - If you are using the console, use the Framerate setting to specify the frame rate for this output. If
you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame
rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in
the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame
rate as a fraction. If you are creating your transcoding job specification as a JSON file without the
console, use FramerateControl to specify which value the service uses for the frame rate for this
output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input.
Choose SPECIFIED if you want the service to use the frame rate you specify in the settings
FramerateNumerator and FramerateDenominator.Vc3FramerateControl,
Vc3FramerateControlVc3Settings.Builder framerateControl(Vc3FramerateControl framerateControl)
framerateControl - If you are using the console, use the Framerate setting to specify the frame rate for this output. If
you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame
rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in
the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame
rate as a fraction. If you are creating your transcoding job specification as a JSON file without the
console, use FramerateControl to specify which value the service uses for the frame rate for this
output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input.
Choose SPECIFIED if you want the service to use the frame rate you specify in the settings
FramerateNumerator and FramerateDenominator.Vc3FramerateControl,
Vc3FramerateControlVc3Settings.Builder framerateConversionAlgorithm(String framerateConversionAlgorithm)
framerateConversionAlgorithm - Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We
recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to
30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter.
This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame
rate conversions, especially if your source video has already been converted from its original
cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the
best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and
incurs a significant add-on cost.Vc3FramerateConversionAlgorithm,
Vc3FramerateConversionAlgorithmVc3Settings.Builder framerateConversionAlgorithm(Vc3FramerateConversionAlgorithm framerateConversionAlgorithm)
framerateConversionAlgorithm - Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We
recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to
30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter.
This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame
rate conversions, especially if your source video has already been converted from its original
cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the
best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and
incurs a significant add-on cost.Vc3FramerateConversionAlgorithm,
Vc3FramerateConversionAlgorithmVc3Settings.Builder framerateDenominator(Integer framerateDenominator)
framerateDenominator - When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a
fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator
of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the
console for transcode jobs that use frame rate conversion, provide the value as a decimal number for
Framerate. In this example, specify 23.976.Vc3Settings.Builder framerateNumerator(Integer framerateNumerator)
framerateNumerator - When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a
fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of
this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the
console for transcode jobs that use frame rate conversion, provide the value as a decimal number for
Framerate. In this example, specify 23.976.Vc3Settings.Builder interlaceMode(String interlaceMode)
interlaceMode - Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will
create a progressive output.Vc3InterlaceMode,
Vc3InterlaceModeVc3Settings.Builder interlaceMode(Vc3InterlaceMode interlaceMode)
interlaceMode - Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will
create a progressive output.Vc3InterlaceMode,
Vc3InterlaceModeVc3Settings.Builder scanTypeConversionMode(String scanTypeConversionMode)
scanTypeConversionMode - Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality
interlaced output. In this case, each progressive frame from the input corresponds to an interlaced
field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output
frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then
interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a
value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic
interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None
(NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also
set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).Vc3ScanTypeConversionMode,
Vc3ScanTypeConversionModeVc3Settings.Builder scanTypeConversionMode(Vc3ScanTypeConversionMode scanTypeConversionMode)
scanTypeConversionMode - Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate.
In this situation, choose Optimized interlacing (INTERLACED_OPTIMIZE) to create a better quality
interlaced output. In this case, each progressive frame from the input corresponds to an interlaced
field in the output. Keep the default value, Basic interlacing (INTERLACED), for all other output
frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then
interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a
value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic
interlacing. Required settings: To use optimized interlacing, you must set Telecine (telecine) to None
(NONE) or Soft (SOFT). You can't use optimized interlacing for hard telecine outputs. You must also
set Interlace mode (interlaceMode) to a value other than Progressive (PROGRESSIVE).Vc3ScanTypeConversionMode,
Vc3ScanTypeConversionModeVc3Settings.Builder slowPal(String slowPal)
slowPal - Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow
PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that
enabling this setting will slightly reduce the duration of your video. Related settings: You must also
set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED),
(framerateNumerator) to 25 and (framerateDenominator) to 1.Vc3SlowPal,
Vc3SlowPalVc3Settings.Builder slowPal(Vc3SlowPal slowPal)
slowPal - Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow
PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that
enabling this setting will slightly reduce the duration of your video. Related settings: You must also
set Framerate to 25. In your JSON job specification, set (framerateControl) to (SPECIFIED),
(framerateNumerator) to 25 and (framerateDenominator) to 1.Vc3SlowPal,
Vc3SlowPalVc3Settings.Builder telecine(String telecine)
telecine - When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output
scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture.
When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to
29.97 without doing anything with the field polarity to create a smoother picture.Vc3Telecine,
Vc3TelecineVc3Settings.Builder telecine(Vc3Telecine telecine)
telecine - When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output
scan type is interlaced, you can optionally enable hard telecine (HARD) to create a smoother picture.
When you keep the default value, None (NONE), MediaConvert does a standard frame rate conversion to
29.97 without doing anything with the field polarity to create a smoother picture.Vc3Telecine,
Vc3TelecineVc3Settings.Builder vc3Class(String vc3Class)
vc3Class - Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with
the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and
width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and
your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of
approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately
220 Mbps. VC3 class also specifies the color bit depth of your output.Vc3Class,
Vc3ClassVc3Settings.Builder vc3Class(Vc3Class vc3Class)
vc3Class - Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with
the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and
width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and
your framerate is 29.97. Then Class 145 (CLASS_145) gives you an output with a bitrate of
approximately 145 Mbps and Class 220 (CLASS_220) gives you and output with a bitrate of approximately
220 Mbps. VC3 class also specifies the color bit depth of your output.Vc3Class,
Vc3ClassCopyright © 2022. All rights reserved.