software.amazon.awssdk.services.mediaconvert.model

Interface Vp8Settings.Builder

All Superinterfaces:

Buildable, CopyableBuilder<Vp8Settings.Builder,Vp8Settings>, SdkBuilder<Vp8Settings.Builder,Vp8Settings>, SdkPojo

Enclosing class:

Vp8Settings

public static interface Vp8Settings.Builder
extends SdkPojo, CopyableBuilder<Vp8Settings.Builder,Vp8Settings>

Method Summary

Modifier and Type	Method and Description
Vp8Settings.Builder	bitrate(Integer bitrate) Target bitrate in bits/second.
Vp8Settings.Builder	framerateControl(String framerateControl) If you are using the console, use the Framerate setting to specify the frame rate for this output.
Vp8Settings.Builder	framerateControl(Vp8FramerateControl framerateControl) If you are using the console, use the Framerate setting to specify the frame rate for this output.
Vp8Settings.Builder	framerateConversionAlgorithm(String framerateConversionAlgorithm) Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
Vp8Settings.Builder	framerateConversionAlgorithm(Vp8FramerateConversionAlgorithm framerateConversionAlgorithm) Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate.
Vp8Settings.Builder	framerateDenominator(Integer framerateDenominator) When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
Vp8Settings.Builder	framerateNumerator(Integer framerateNumerator) When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
Vp8Settings.Builder	gopSize(Double gopSize) GOP Length (keyframe interval) in frames.
Vp8Settings.Builder	hrdBufferSize(Integer hrdBufferSize) Optional.
Vp8Settings.Builder	maxBitrate(Integer maxBitrate) Ignore this setting unless you set qualityTuningLevel to MULTI_PASS.
Vp8Settings.Builder	parControl(String parControl) Optional.
Vp8Settings.Builder	parControl(Vp8ParControl parControl) Optional.
Vp8Settings.Builder	parDenominator(Integer parDenominator) Required when you set Pixel aspect ratio (parControl) to SPECIFIED.
Vp8Settings.Builder	parNumerator(Integer parNumerator) Required when you set Pixel aspect ratio (parControl) to SPECIFIED.
Vp8Settings.Builder	qualityTuningLevel(String qualityTuningLevel) Optional.
Vp8Settings.Builder	qualityTuningLevel(Vp8QualityTuningLevel qualityTuningLevel) Optional.
Vp8Settings.Builder	rateControlMode(String rateControlMode) With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.
Vp8Settings.Builder	rateControlMode(Vp8RateControlMode rateControlMode) With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.

Methods inherited from interface software.amazon.awssdk.core.SdkPojo

equalsBySdkFields, sdkFields

Methods inherited from interface software.amazon.awssdk.utils.builder.CopyableBuilder

copy

Methods inherited from interface software.amazon.awssdk.utils.builder.SdkBuilder

applyMutation, build

Method Detail

bitrate

Vp8Settings.Builder bitrate(Integer bitrate)

Target bitrate in bits/second. For example, enter five megabits per second as 5000000.

Parameters:

bitrate - Target bitrate in bits/second. For example, enter five megabits per second as 5000000.

Returns:

Returns a reference to this object so that method calls can be chained together.

framerateControl

Vp8Settings.Builder framerateControl(String framerateControl)

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Parameters:

framerateControl - If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

Vp8FramerateControl, Vp8FramerateControl

framerateControl

Vp8Settings.Builder framerateControl(Vp8FramerateControl framerateControl)

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Parameters:

framerateControl - If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

Vp8FramerateControl, Vp8FramerateControl

framerateConversionAlgorithm

Vp8Settings.Builder framerateConversionAlgorithm(String framerateConversionAlgorithm)

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Parameters:

framerateConversionAlgorithm - Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

Vp8FramerateConversionAlgorithm, Vp8FramerateConversionAlgorithm

framerateConversionAlgorithm

Vp8Settings.Builder framerateConversionAlgorithm(Vp8FramerateConversionAlgorithm framerateConversionAlgorithm)

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Parameters:

framerateConversionAlgorithm - Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. We recommend using drop duplicate (DUPLICATE_DROP) for numerically simple conversions, such as 60 fps to 30 fps. For numerically complex conversions, you can use interpolate (INTERPOLATE) to avoid stutter. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence, use FrameFormer (FRAMEFORMER) to do motion-compensated interpolation. FrameFormer chooses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

Vp8FramerateConversionAlgorithm, Vp8FramerateConversionAlgorithm

framerateDenominator

Vp8Settings.Builder framerateDenominator(Integer framerateDenominator)

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Parameters:

framerateDenominator - When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Returns:

Returns a reference to this object so that method calls can be chained together.

framerateNumerator

Vp8Settings.Builder framerateNumerator(Integer framerateNumerator)

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Parameters:

framerateNumerator - When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

Returns:

Returns a reference to this object so that method calls can be chained together.

gopSize

Vp8Settings.Builder gopSize(Double gopSize)

GOP Length (keyframe interval) in frames. Must be greater than zero.

Parameters:

gopSize - GOP Length (keyframe interval) in frames. Must be greater than zero.

Returns:

Returns a reference to this object so that method calls can be chained together.

hrdBufferSize

Vp8Settings.Builder hrdBufferSize(Integer hrdBufferSize)

Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

Parameters:

hrdBufferSize - Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

Returns:

Returns a reference to this object so that method calls can be chained together.

maxBitrate

Vp8Settings.Builder maxBitrate(Integer maxBitrate)

Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.

Parameters:

maxBitrate - Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.

Returns:

Returns a reference to this object so that method calls can be chained together.

parControl

Vp8Settings.Builder parControl(String parControl)

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

Parameters:

parControl - Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

Vp8ParControl, Vp8ParControl

parControl

Vp8Settings.Builder parControl(Vp8ParControl parControl)

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

Parameters:

parControl - Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source (INITIALIZE_FROM_SOURCE), uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. To specify a different PAR by editing the JSON job specification, choose SPECIFIED. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

Vp8ParControl, Vp8ParControl

parDenominator

Vp8Settings.Builder parDenominator(Integer parDenominator)

Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

Parameters:

parDenominator - Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

Returns:

Returns a reference to this object so that method calls can be chained together.

parNumerator

Vp8Settings.Builder parNumerator(Integer parNumerator)

Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.

Parameters:

parNumerator - Required when you set Pixel aspect ratio (parControl) to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.

Returns:

Returns a reference to this object so that method calls can be chained together.

qualityTuningLevel

Vp8Settings.Builder qualityTuningLevel(String qualityTuningLevel)

Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.

Parameters:

qualityTuningLevel - Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

Vp8QualityTuningLevel, Vp8QualityTuningLevel

qualityTuningLevel

Vp8Settings.Builder qualityTuningLevel(Vp8QualityTuningLevel qualityTuningLevel)

Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.

Parameters:

qualityTuningLevel - Optional. Use Quality tuning level (qualityTuningLevel) to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

Vp8QualityTuningLevel, Vp8QualityTuningLevel

rateControlMode

Vp8Settings.Builder rateControlMode(String rateControlMode)

With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.

Parameters:

rateControlMode - With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

Vp8RateControlMode, Vp8RateControlMode

rateControlMode

Vp8Settings.Builder rateControlMode(Vp8RateControlMode rateControlMode)

With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.

Parameters:

rateControlMode - With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.

Returns:

Returns a reference to this object so that method calls can be chained together.

See Also:

Vp8RateControlMode, Vp8RateControlMode