Package software.amazon.awssdk.services.mediaconvert.model

Interface DashIsoGroupSettings.Builder

    • Method Detail

      • additionalManifests

        DashIsoGroupSettings.Builder additionalManifests​(Collection<DashAdditionalManifest> additionalManifests)
        By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
        Parameters:
        additionalManifests - By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • additionalManifests

        DashIsoGroupSettings.Builder additionalManifests​(DashAdditionalManifest... additionalManifests)
        By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
        Parameters:
        additionalManifests - By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • additionalManifests

        DashIsoGroupSettings.Builder additionalManifests​(Consumer<DashAdditionalManifest.Builder>... additionalManifests)
        By default, the service creates one .mpd DASH manifest for each DASH ISO output group in your job. This default manifest references every output in the output group. To create additional DASH manifests that reference a subset of the outputs in the output group, specify a list of them here. This is a convenience method that creates an instance of the DashAdditionalManifest.Builder avoiding the need to create one manually via DashAdditionalManifest.builder().

        When the Consumer completes, SdkBuilder.build() is called immediately and its result is passed to #additionalManifests(List).

        Parameters:
        additionalManifests - a consumer that will call methods on DashAdditionalManifest.Builder
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        #additionalManifests(java.util.Collection)

      • audioChannelConfigSchemeIdUri

        DashIsoGroupSettings.Builder audioChannelConfigSchemeIdUri​(String audioChannelConfigSchemeIdUri)
        Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration, to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
        Parameters:
        audioChannelConfigSchemeIdUri - Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration, to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoGroupAudioChannelConfigSchemeIdUri, DashIsoGroupAudioChannelConfigSchemeIdUri

      • audioChannelConfigSchemeIdUri

        DashIsoGroupSettings.Builder audioChannelConfigSchemeIdUri​(DashIsoGroupAudioChannelConfigSchemeIdUri audioChannelConfigSchemeIdUri)
        Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration, to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
        Parameters:
        audioChannelConfigSchemeIdUri - Use this setting only when your audio codec is a Dolby one (AC3, EAC3, or Atmos) and your downstream workflow requires that your DASH manifest use the Dolby channel configuration tag, rather than the MPEG one. For example, you might need to use this to make dynamic ad insertion work. Specify which audio channel configuration scheme ID URI MediaConvert writes in your DASH manifest. Keep the default value, MPEG channel configuration, to have MediaConvert write this: urn:mpeg:mpegB:cicp:ChannelConfiguration. Choose Dolby channel configuration to have MediaConvert write this instead: tag:dolby.com,2014:dash:audio_channel_configuration:2011.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoGroupAudioChannelConfigSchemeIdUri, DashIsoGroupAudioChannelConfigSchemeIdUri

      • baseUrl

        DashIsoGroupSettings.Builder baseUrl​(String baseUrl)
        A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
        Parameters:
        baseUrl - A partial URI prefix that will be put in the manifest (.mpd) file at the top level BaseURL element. Can be used if streams are delivered from a different URL than the manifest file.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • dashIFrameTrickPlayNameModifier

        DashIsoGroupSettings.Builder dashIFrameTrickPlayNameModifier​(String dashIFrameTrickPlayNameModifier)
        Specify whether MediaConvert generates I-frame only video segments for DASH trick play, also known as trick mode. When specified, the I-frame only video segments are included within an additional AdaptationSet in your DASH output manifest. To generate I-frame only video segments: Enter a name as a text string, up to 256 character long. This name is appended to the end of this output group's base filename, that you specify as part of your destination URI, and used for the I-frame only video segment files. You may also include format identifiers. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/using-variables-in- your-job-settings.html#using-settings-variables-with-streaming-outputs To not generate I-frame only video segments: Leave blank.
        Parameters:
        dashIFrameTrickPlayNameModifier - Specify whether MediaConvert generates I-frame only video segments for DASH trick play, also known as trick mode. When specified, the I-frame only video segments are included within an additional AdaptationSet in your DASH output manifest. To generate I-frame only video segments: Enter a name as a text string, up to 256 character long. This name is appended to the end of this output group's base filename, that you specify as part of your destination URI, and used for the I-frame only video segment files. You may also include format identifiers. For more information, see: https://docs.aws.amazon .com/mediaconvert/latest/ug/using-variables-in-your-job-settings.html#using-settings -variables-with-streaming-outputs To not generate I-frame only video segments: Leave blank.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • dashManifestStyle

        DashIsoGroupSettings.Builder dashManifestStyle​(String dashManifestStyle)
        Specify how MediaConvert writes SegmentTimeline in your output DASH manifest. To write a SegmentTimeline in each video Representation: Keep the default value, Basic. To write a common SegmentTimeline in the video AdaptationSet: Choose Compact. Note that MediaConvert will still write a SegmentTimeline in any Representation that does not share a common timeline. To write a video AdaptationSet for each different output framerate, and a common SegmentTimeline in each AdaptationSet: Choose Distinct.
        Parameters:
        dashManifestStyle - Specify how MediaConvert writes SegmentTimeline in your output DASH manifest. To write a SegmentTimeline in each video Representation: Keep the default value, Basic. To write a common SegmentTimeline in the video AdaptationSet: Choose Compact. Note that MediaConvert will still write a SegmentTimeline in any Representation that does not share a common timeline. To write a video AdaptationSet for each different output framerate, and a common SegmentTimeline in each AdaptationSet: Choose Distinct.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashManifestStyle, DashManifestStyle

      • dashManifestStyle

        DashIsoGroupSettings.Builder dashManifestStyle​(DashManifestStyle dashManifestStyle)
        Specify how MediaConvert writes SegmentTimeline in your output DASH manifest. To write a SegmentTimeline in each video Representation: Keep the default value, Basic. To write a common SegmentTimeline in the video AdaptationSet: Choose Compact. Note that MediaConvert will still write a SegmentTimeline in any Representation that does not share a common timeline. To write a video AdaptationSet for each different output framerate, and a common SegmentTimeline in each AdaptationSet: Choose Distinct.
        Parameters:
        dashManifestStyle - Specify how MediaConvert writes SegmentTimeline in your output DASH manifest. To write a SegmentTimeline in each video Representation: Keep the default value, Basic. To write a common SegmentTimeline in the video AdaptationSet: Choose Compact. Note that MediaConvert will still write a SegmentTimeline in any Representation that does not share a common timeline. To write a video AdaptationSet for each different output framerate, and a common SegmentTimeline in each AdaptationSet: Choose Distinct.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashManifestStyle, DashManifestStyle

      • destination

        DashIsoGroupSettings.Builder destination​(String destination)
        Use Destination to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
        Parameters:
        destination - Use Destination to specify the S3 output location and the output filename base. Destination accepts format identifiers. If you do not specify the base filename in the URI, the service will use the filename of the input file. If your job has multiple inputs, the service uses the filename of the first input file.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • destinationSettings

        DashIsoGroupSettings.Builder destinationSettings​(DestinationSettings destinationSettings)
        Settings associated with the destination. Will vary based on the type of destination
        Parameters:
        destinationSettings - Settings associated with the destination. Will vary based on the type of destination
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • fragmentLength

        DashIsoGroupSettings.Builder fragmentLength​(Integer fragmentLength)
        Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
        Parameters:
        fragmentLength - Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • imageBasedTrickPlay

        DashIsoGroupSettings.Builder imageBasedTrickPlay​(String imageBasedTrickPlay)
        Specify whether MediaConvert generates images for trick play. Keep the default value, None, to not generate any images. Choose Thumbnail to generate tiled thumbnails. Choose Thumbnail and full frame to generate tiled thumbnails and full-resolution images of single frames. MediaConvert adds an entry in the .mpd manifest for each set of images that you generate. A common application for these images is Roku trick mode. The thumbnails and full-frame images that MediaConvert creates with this feature are compatible with this Roku specification: https://developer.roku.com/docs/developer-program/media-playback/trick-mode/hls-and-dash.md
        Parameters:
        imageBasedTrickPlay - Specify whether MediaConvert generates images for trick play. Keep the default value, None, to not generate any images. Choose Thumbnail to generate tiled thumbnails. Choose Thumbnail and full frame to generate tiled thumbnails and full-resolution images of single frames. MediaConvert adds an entry in the .mpd manifest for each set of images that you generate. A common application for these images is Roku trick mode. The thumbnails and full-frame images that MediaConvert creates with this feature are compatible with this Roku specification: https://developer.roku.com/docs/developer-program/media-playback/trick-mode/hls-and-dash.md
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoImageBasedTrickPlay, DashIsoImageBasedTrickPlay

      • imageBasedTrickPlay

        DashIsoGroupSettings.Builder imageBasedTrickPlay​(DashIsoImageBasedTrickPlay imageBasedTrickPlay)
        Specify whether MediaConvert generates images for trick play. Keep the default value, None, to not generate any images. Choose Thumbnail to generate tiled thumbnails. Choose Thumbnail and full frame to generate tiled thumbnails and full-resolution images of single frames. MediaConvert adds an entry in the .mpd manifest for each set of images that you generate. A common application for these images is Roku trick mode. The thumbnails and full-frame images that MediaConvert creates with this feature are compatible with this Roku specification: https://developer.roku.com/docs/developer-program/media-playback/trick-mode/hls-and-dash.md
        Parameters:
        imageBasedTrickPlay - Specify whether MediaConvert generates images for trick play. Keep the default value, None, to not generate any images. Choose Thumbnail to generate tiled thumbnails. Choose Thumbnail and full frame to generate tiled thumbnails and full-resolution images of single frames. MediaConvert adds an entry in the .mpd manifest for each set of images that you generate. A common application for these images is Roku trick mode. The thumbnails and full-frame images that MediaConvert creates with this feature are compatible with this Roku specification: https://developer.roku.com/docs/developer-program/media-playback/trick-mode/hls-and-dash.md
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoImageBasedTrickPlay, DashIsoImageBasedTrickPlay

      • imageBasedTrickPlaySettings

        DashIsoGroupSettings.Builder imageBasedTrickPlaySettings​(DashIsoImageBasedTrickPlaySettings imageBasedTrickPlaySettings)
        Tile and thumbnail settings applicable when imageBasedTrickPlay is ADVANCED
        Parameters:
        imageBasedTrickPlaySettings - Tile and thumbnail settings applicable when imageBasedTrickPlay is ADVANCED
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • minBufferTime

        DashIsoGroupSettings.Builder minBufferTime​(Integer minBufferTime)
        Minimum time of initially buffered media that is needed to ensure smooth playout.
        Parameters:
        minBufferTime - Minimum time of initially buffered media that is needed to ensure smooth playout.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • minFinalSegmentLength

        DashIsoGroupSettings.Builder minFinalSegmentLength​(Double minFinalSegmentLength)
        Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
        Parameters:
        minFinalSegmentLength - Keep this setting at the default value of 0, unless you are troubleshooting a problem with how devices play back the end of your video asset. If you know that player devices are hanging on the final segment of your video because the length of your final segment is too short, use this setting to specify a minimum final segment length, in seconds. Choose a value that is greater than or equal to 1 and less than your segment length. When you specify a value for this setting, the encoder will combine any final segment that is shorter than the length that you specify with the previous segment. For example, your segment length is 3 seconds and your final segment is .5 seconds without a minimum final segment length; when you set the minimum final segment length to 1, your final segment is 3.5 seconds.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • mpdManifestBandwidthType

        DashIsoGroupSettings.Builder mpdManifestBandwidthType​(String mpdManifestBandwidthType)
        Specify how the value for bandwidth is determined for each video Representation in your output MPD manifest. We recommend that you choose a MPD manifest bandwidth type that is compatible with your downstream player configuration. Max: Use the same value that you specify for Max bitrate in the video output, in bits per second. Average: Use the calculated average bitrate of the encoded video output, in bits per second.
        Parameters:
        mpdManifestBandwidthType - Specify how the value for bandwidth is determined for each video Representation in your output MPD manifest. We recommend that you choose a MPD manifest bandwidth type that is compatible with your downstream player configuration. Max: Use the same value that you specify for Max bitrate in the video output, in bits per second. Average: Use the calculated average bitrate of the encoded video output, in bits per second.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoMpdManifestBandwidthType, DashIsoMpdManifestBandwidthType

      • mpdManifestBandwidthType

        DashIsoGroupSettings.Builder mpdManifestBandwidthType​(DashIsoMpdManifestBandwidthType mpdManifestBandwidthType)
        Specify how the value for bandwidth is determined for each video Representation in your output MPD manifest. We recommend that you choose a MPD manifest bandwidth type that is compatible with your downstream player configuration. Max: Use the same value that you specify for Max bitrate in the video output, in bits per second. Average: Use the calculated average bitrate of the encoded video output, in bits per second.
        Parameters:
        mpdManifestBandwidthType - Specify how the value for bandwidth is determined for each video Representation in your output MPD manifest. We recommend that you choose a MPD manifest bandwidth type that is compatible with your downstream player configuration. Max: Use the same value that you specify for Max bitrate in the video output, in bits per second. Average: Use the calculated average bitrate of the encoded video output, in bits per second.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoMpdManifestBandwidthType, DashIsoMpdManifestBandwidthType

      • mpdProfile

        DashIsoGroupSettings.Builder mpdProfile​(String mpdProfile)
        Specify whether your DASH profile is on-demand or main. When you choose Main profile, the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand, the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control to Single file.
        Parameters:
        mpdProfile - Specify whether your DASH profile is on-demand or main. When you choose Main profile, the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand, the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control to Single file.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoMpdProfile, DashIsoMpdProfile

      • mpdProfile

        DashIsoGroupSettings.Builder mpdProfile​(DashIsoMpdProfile mpdProfile)
        Specify whether your DASH profile is on-demand or main. When you choose Main profile, the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand, the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control to Single file.
        Parameters:
        mpdProfile - Specify whether your DASH profile is on-demand or main. When you choose Main profile, the service signals urn:mpeg:dash:profile:isoff-main:2011 in your .mpd DASH manifest. When you choose On-demand, the service signals urn:mpeg:dash:profile:isoff-on-demand:2011 in your .mpd. When you choose On-demand, you must also set the output group setting Segment control to Single file.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoMpdProfile, DashIsoMpdProfile

      • ptsOffsetHandlingForBFrames

        DashIsoGroupSettings.Builder ptsOffsetHandlingForBFrames​(String ptsOffsetHandlingForBFrames)
        Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
        Parameters:
        ptsOffsetHandlingForBFrames - Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoPtsOffsetHandlingForBFrames, DashIsoPtsOffsetHandlingForBFrames

      • ptsOffsetHandlingForBFrames

        DashIsoGroupSettings.Builder ptsOffsetHandlingForBFrames​(DashIsoPtsOffsetHandlingForBFrames ptsOffsetHandlingForBFrames)
        Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
        Parameters:
        ptsOffsetHandlingForBFrames - Use this setting only when your output video stream has B-frames, which causes the initial presentation time stamp (PTS) to be offset from the initial decode time stamp (DTS). Specify how MediaConvert handles PTS when writing time stamps in output DASH manifests. Choose Match initial PTS when you want MediaConvert to use the initial PTS as the first time stamp in the manifest. Choose Zero-based to have MediaConvert ignore the initial PTS in the video stream and instead write the initial time stamp as zero in the manifest. For outputs that don't have B-frames, the time stamps in your DASH manifests start at zero regardless of your choice here.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoPtsOffsetHandlingForBFrames, DashIsoPtsOffsetHandlingForBFrames

      • segmentControl

        DashIsoGroupSettings.Builder segmentControl​(String segmentControl)
        When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
        Parameters:
        segmentControl - When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoSegmentControl, DashIsoSegmentControl

      • segmentControl

        DashIsoGroupSettings.Builder segmentControl​(DashIsoSegmentControl segmentControl)
        When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
        Parameters:
        segmentControl - When set to SINGLE_FILE, a single output file is generated, which is internally segmented using the Fragment Length and Segment Length. When set to SEGMENTED_FILES, separate segment files will be created.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoSegmentControl, DashIsoSegmentControl

      • segmentLength

        DashIsoGroupSettings.Builder segmentLength​(Integer segmentLength)
        Specify the length, in whole seconds, of each segment. When you don't specify a value, MediaConvert defaults to 30. Related settings: Use Segment length control to specify whether the encoder enforces this value strictly. Use Segment control to specify whether MediaConvert creates separate segment files or one content file that has metadata to mark the segment boundaries.
        Parameters:
        segmentLength - Specify the length, in whole seconds, of each segment. When you don't specify a value, MediaConvert defaults to 30. Related settings: Use Segment length control to specify whether the encoder enforces this value strictly. Use Segment control to specify whether MediaConvert creates separate segment files or one content file that has metadata to mark the segment boundaries.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • segmentLengthControl

        DashIsoGroupSettings.Builder segmentLengthControl​(String segmentLengthControl)
        Specify how you want MediaConvert to determine the segment length. Choose Exact to have the encoder use the exact length that you specify with the setting Segment length. This might result in extra I-frames. Choose Multiple of GOP to have the encoder round up the segment lengths to match the next GOP boundary.
        Parameters:
        segmentLengthControl - Specify how you want MediaConvert to determine the segment length. Choose Exact to have the encoder use the exact length that you specify with the setting Segment length. This might result in extra I-frames. Choose Multiple of GOP to have the encoder round up the segment lengths to match the next GOP boundary.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoSegmentLengthControl, DashIsoSegmentLengthControl

      • segmentLengthControl

        DashIsoGroupSettings.Builder segmentLengthControl​(DashIsoSegmentLengthControl segmentLengthControl)
        Specify how you want MediaConvert to determine the segment length. Choose Exact to have the encoder use the exact length that you specify with the setting Segment length. This might result in extra I-frames. Choose Multiple of GOP to have the encoder round up the segment lengths to match the next GOP boundary.
        Parameters:
        segmentLengthControl - Specify how you want MediaConvert to determine the segment length. Choose Exact to have the encoder use the exact length that you specify with the setting Segment length. This might result in extra I-frames. Choose Multiple of GOP to have the encoder round up the segment lengths to match the next GOP boundary.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoSegmentLengthControl, DashIsoSegmentLengthControl

      • videoCompositionOffsets

        DashIsoGroupSettings.Builder videoCompositionOffsets​(String videoCompositionOffsets)
        Specify the video sample composition time offset mode in the output fMP4 TRUN box. For wider player compatibility, set Video composition offsets to Unsigned or leave blank. The earliest presentation time may be greater than zero, and sample composition time offsets will increment using unsigned integers. For strict fMP4 video and audio timing, set Video composition offsets to Signed. The earliest presentation time will be equal to zero, and sample composition time offsets will increment using signed integers.
        Parameters:
        videoCompositionOffsets - Specify the video sample composition time offset mode in the output fMP4 TRUN box. For wider player compatibility, set Video composition offsets to Unsigned or leave blank. The earliest presentation time may be greater than zero, and sample composition time offsets will increment using unsigned integers. For strict fMP4 video and audio timing, set Video composition offsets to Signed. The earliest presentation time will be equal to zero, and sample composition time offsets will increment using signed integers.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoVideoCompositionOffsets, DashIsoVideoCompositionOffsets

      • videoCompositionOffsets

        DashIsoGroupSettings.Builder videoCompositionOffsets​(DashIsoVideoCompositionOffsets videoCompositionOffsets)
        Specify the video sample composition time offset mode in the output fMP4 TRUN box. For wider player compatibility, set Video composition offsets to Unsigned or leave blank. The earliest presentation time may be greater than zero, and sample composition time offsets will increment using unsigned integers. For strict fMP4 video and audio timing, set Video composition offsets to Signed. The earliest presentation time will be equal to zero, and sample composition time offsets will increment using signed integers.
        Parameters:
        videoCompositionOffsets - Specify the video sample composition time offset mode in the output fMP4 TRUN box. For wider player compatibility, set Video composition offsets to Unsigned or leave blank. The earliest presentation time may be greater than zero, and sample composition time offsets will increment using unsigned integers. For strict fMP4 video and audio timing, set Video composition offsets to Signed. The earliest presentation time will be equal to zero, and sample composition time offsets will increment using signed integers.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoVideoCompositionOffsets, DashIsoVideoCompositionOffsets

      • writeSegmentTimelineInRepresentation

        DashIsoGroupSettings.Builder writeSegmentTimelineInRepresentation​(String writeSegmentTimelineInRepresentation)
        If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
        Parameters:
        writeSegmentTimelineInRepresentation - If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoWriteSegmentTimelineInRepresentation, DashIsoWriteSegmentTimelineInRepresentation

      • writeSegmentTimelineInRepresentation

        DashIsoGroupSettings.Builder writeSegmentTimelineInRepresentation​(DashIsoWriteSegmentTimelineInRepresentation writeSegmentTimelineInRepresentation)
        If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
        Parameters:
        writeSegmentTimelineInRepresentation - If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        DashIsoWriteSegmentTimelineInRepresentation, DashIsoWriteSegmentTimelineInRepresentation