Package software.amazon.awssdk.services.mediaconvert.model

Class H265Settings

    • Method Detail

      • adaptiveQuantization

        public final H265AdaptiveQuantization adaptiveQuantization()
        When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.

        If the service returns an enum value that is not available in the current SDK version, adaptiveQuantization will return H265AdaptiveQuantization.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from adaptiveQuantizationAsString().

        Returns:
        When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.
        See Also:
        H265AdaptiveQuantization

      • adaptiveQuantizationAsString

        public final String adaptiveQuantizationAsString()
        When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.

        If the service returns an enum value that is not available in the current SDK version, adaptiveQuantization will return H265AdaptiveQuantization.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from adaptiveQuantizationAsString().

        Returns:
        When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.
        See Also:
        H265AdaptiveQuantization

      • alternateTransferFunctionSeiAsString

        public final String alternateTransferFunctionSeiAsString()
        Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).

        If the service returns an enum value that is not available in the current SDK version, alternateTransferFunctionSei will return H265AlternateTransferFunctionSei.UNKNOWN_TO_SDK_VERSION . The raw value returned by the service is available from alternateTransferFunctionSeiAsString().

        Returns:
        Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).
        See Also:
        H265AlternateTransferFunctionSei

      • bandwidthReductionFilter

        public final BandwidthReductionFilter bandwidthReductionFilter()
        The Bandwidth reduction filter increases the video quality of your output relative to its bitrate. Use to lower the bitrate of your constant quality QVBR output, with little or no perceptual decrease in quality. Or, use to increase the video quality of outputs with other rate control modes relative to the bitrate that you specify. Bandwidth reduction increases further when your input is low quality or noisy. Outputs that use this feature incur pro-tier pricing. When you include Bandwidth reduction filter, you cannot include the Noise reducer preprocessor.
        Returns:
        The Bandwidth reduction filter increases the video quality of your output relative to its bitrate. Use to lower the bitrate of your constant quality QVBR output, with little or no perceptual decrease in quality. Or, use to increase the video quality of outputs with other rate control modes relative to the bitrate that you specify. Bandwidth reduction increases further when your input is low quality or noisy. Outputs that use this feature incur pro-tier pricing. When you include Bandwidth reduction filter, you cannot include the Noise reducer preprocessor.

      • bitrate

        public final Integer bitrate()
        Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
        Returns:
        Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.

      • codecProfile

        public final H265CodecProfile codecProfile()
        Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.

        If the service returns an enum value that is not available in the current SDK version, codecProfile will return H265CodecProfile.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from codecProfileAsString().

        Returns:
        Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
        See Also:
        H265CodecProfile

      • codecProfileAsString

        public final String codecProfileAsString()
        Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.

        If the service returns an enum value that is not available in the current SDK version, codecProfile will return H265CodecProfile.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from codecProfileAsString().

        Returns:
        Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.
        See Also:
        H265CodecProfile

      • deblocking

        public final H265Deblocking deblocking()
        Use Deblocking to improve the video quality of your output by smoothing the edges of macroblock artifacts created during video compression. To reduce blocking artifacts at block boundaries, and improve overall video quality: Keep the default value, Enabled. To not apply any deblocking: Choose Disabled. Visible block edge artifacts might appear in the output, especially at lower bitrates.

        If the service returns an enum value that is not available in the current SDK version, deblocking will return H265Deblocking.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from deblockingAsString().

        Returns:
        Use Deblocking to improve the video quality of your output by smoothing the edges of macroblock artifacts created during video compression. To reduce blocking artifacts at block boundaries, and improve overall video quality: Keep the default value, Enabled. To not apply any deblocking: Choose Disabled. Visible block edge artifacts might appear in the output, especially at lower bitrates.
        See Also:
        H265Deblocking

      • deblockingAsString

        public final String deblockingAsString()
        Use Deblocking to improve the video quality of your output by smoothing the edges of macroblock artifacts created during video compression. To reduce blocking artifacts at block boundaries, and improve overall video quality: Keep the default value, Enabled. To not apply any deblocking: Choose Disabled. Visible block edge artifacts might appear in the output, especially at lower bitrates.

        If the service returns an enum value that is not available in the current SDK version, deblocking will return H265Deblocking.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from deblockingAsString().

        Returns:
        Use Deblocking to improve the video quality of your output by smoothing the edges of macroblock artifacts created during video compression. To reduce blocking artifacts at block boundaries, and improve overall video quality: Keep the default value, Enabled. To not apply any deblocking: Choose Disabled. Visible block edge artifacts might appear in the output, especially at lower bitrates.
        See Also:
        H265Deblocking

      • dynamicSubGop

        public final H265DynamicSubGop dynamicSubGop()
        Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.

        If the service returns an enum value that is not available in the current SDK version, dynamicSubGop will return H265DynamicSubGop.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from dynamicSubGopAsString().

        Returns:
        Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.
        See Also:
        H265DynamicSubGop

      • dynamicSubGopAsString

        public final String dynamicSubGopAsString()
        Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.

        If the service returns an enum value that is not available in the current SDK version, dynamicSubGop will return H265DynamicSubGop.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from dynamicSubGopAsString().

        Returns:
        Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.
        See Also:
        H265DynamicSubGop

      • endOfStreamMarkers

        public final H265EndOfStreamMarkers endOfStreamMarkers()
        Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.

        If the service returns an enum value that is not available in the current SDK version, endOfStreamMarkers will return H265EndOfStreamMarkers.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from endOfStreamMarkersAsString().

        Returns:
        Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.
        See Also:
        H265EndOfStreamMarkers

      • endOfStreamMarkersAsString

        public final String endOfStreamMarkersAsString()
        Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.

        If the service returns an enum value that is not available in the current SDK version, endOfStreamMarkers will return H265EndOfStreamMarkers.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from endOfStreamMarkersAsString().

        Returns:
        Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.
        See Also:
        H265EndOfStreamMarkers

      • flickerAdaptiveQuantization

        public final H265FlickerAdaptiveQuantization flickerAdaptiveQuantization()
        Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.

        If the service returns an enum value that is not available in the current SDK version, flickerAdaptiveQuantization will return H265FlickerAdaptiveQuantization.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from flickerAdaptiveQuantizationAsString().

        Returns:
        Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.
        See Also:
        H265FlickerAdaptiveQuantization

      • flickerAdaptiveQuantizationAsString

        public final String flickerAdaptiveQuantizationAsString()
        Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.

        If the service returns an enum value that is not available in the current SDK version, flickerAdaptiveQuantization will return H265FlickerAdaptiveQuantization.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from flickerAdaptiveQuantizationAsString().

        Returns:
        Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.
        See Also:
        H265FlickerAdaptiveQuantization

      • framerateControl

        public final H265FramerateControl framerateControl()
        Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

        If the service returns an enum value that is not available in the current SDK version, framerateControl will return H265FramerateControl.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from framerateControlAsString().

        Returns:
        Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.
        See Also:
        H265FramerateControl

      • framerateControlAsString

        public final String framerateControlAsString()
        Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

        If the service returns an enum value that is not available in the current SDK version, framerateControl will return H265FramerateControl.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from framerateControlAsString().

        Returns:
        Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.
        See Also:
        H265FramerateControl

      • framerateConversionAlgorithm

        public final H265FramerateConversionAlgorithm framerateConversionAlgorithm()
        Choose the method that you want MediaConvert to use when increasing or decreasing your video's frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96. To create an output with the same number of frames as your input: Choose Maintain frame count. When you do, MediaConvert will not drop, interpolate, add, or otherwise change the frame count from your input to your output. Note that since the frame count is maintained, the duration of your output will become shorter at higher frame rates and longer at lower frame rates.

        If the service returns an enum value that is not available in the current SDK version, framerateConversionAlgorithm will return H265FramerateConversionAlgorithm.UNKNOWN_TO_SDK_VERSION . The raw value returned by the service is available from framerateConversionAlgorithmAsString().

        Returns:
        Choose the method that you want MediaConvert to use when increasing or decreasing your video's frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96. To create an output with the same number of frames as your input: Choose Maintain frame count. When you do, MediaConvert will not drop, interpolate, add, or otherwise change the frame count from your input to your output. Note that since the frame count is maintained, the duration of your output will become shorter at higher frame rates and longer at lower frame rates.
        See Also:
        H265FramerateConversionAlgorithm

      • framerateConversionAlgorithmAsString

        public final String framerateConversionAlgorithmAsString()
        Choose the method that you want MediaConvert to use when increasing or decreasing your video's frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96. To create an output with the same number of frames as your input: Choose Maintain frame count. When you do, MediaConvert will not drop, interpolate, add, or otherwise change the frame count from your input to your output. Note that since the frame count is maintained, the duration of your output will become shorter at higher frame rates and longer at lower frame rates.

        If the service returns an enum value that is not available in the current SDK version, framerateConversionAlgorithm will return H265FramerateConversionAlgorithm.UNKNOWN_TO_SDK_VERSION . The raw value returned by the service is available from framerateConversionAlgorithmAsString().

        Returns:
        Choose the method that you want MediaConvert to use when increasing or decreasing your video's frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96. To create an output with the same number of frames as your input: Choose Maintain frame count. When you do, MediaConvert will not drop, interpolate, add, or otherwise change the frame count from your input to your output. Note that since the frame count is maintained, the duration of your output will become shorter at higher frame rates and longer at lower frame rates.
        See Also:
        H265FramerateConversionAlgorithm

      • framerateDenominator

        public final Integer framerateDenominator()
        When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
        Returns:
        When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

      • framerateNumerator

        public final Integer framerateNumerator()
        When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
        Returns:
        When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

      • gopBReference

        public final H265GopBReference gopBReference()
        Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.

        If the service returns an enum value that is not available in the current SDK version, gopBReference will return H265GopBReference.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from gopBReferenceAsString().

        Returns:
        Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.
        See Also:
        H265GopBReference

      • gopBReferenceAsString

        public final String gopBReferenceAsString()
        Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.

        If the service returns an enum value that is not available in the current SDK version, gopBReference will return H265GopBReference.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from gopBReferenceAsString().

        Returns:
        Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.
        See Also:
        H265GopBReference

      • gopClosedCadence

        public final Integer gopClosedCadence()
        Specify the relative frequency of open to closed GOPs in this output. For example, if you want to allow four open GOPs and then require a closed GOP, set this value to 5. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. If you do explicitly specify a value, for segmented outputs, don't set this value to 0.
        Returns:
        Specify the relative frequency of open to closed GOPs in this output. For example, if you want to allow four open GOPs and then require a closed GOP, set this value to 5. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. If you do explicitly specify a value, for segmented outputs, don't set this value to 0.

      • gopSize

        public final Double gopSize()
        Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds. Specify the GOP length using a whole number of frames or a decimal value of seconds. MediaConvert will interpret this value as frames or seconds depending on the value you choose for GOP mode control. If you want to allow MediaConvert to automatically determine GOP size, leave GOP size blank and set GOP mode control to Auto. If your output group specifies HLS, DASH, or CMAF, leave GOP size blank and set GOP mode control to Auto in each output in your output group.
        Returns:
        Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds. Specify the GOP length using a whole number of frames or a decimal value of seconds. MediaConvert will interpret this value as frames or seconds depending on the value you choose for GOP mode control. If you want to allow MediaConvert to automatically determine GOP size, leave GOP size blank and set GOP mode control to Auto. If your output group specifies HLS, DASH, or CMAF, leave GOP size blank and set GOP mode control to Auto in each output in your output group.

      • gopSizeUnits

        public final H265GopSizeUnits gopSizeUnits()
        Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.

        If the service returns an enum value that is not available in the current SDK version, gopSizeUnits will return H265GopSizeUnits.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from gopSizeUnitsAsString().

        Returns:
        Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.
        See Also:
        H265GopSizeUnits

      • gopSizeUnitsAsString

        public final String gopSizeUnitsAsString()
        Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.

        If the service returns an enum value that is not available in the current SDK version, gopSizeUnits will return H265GopSizeUnits.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from gopSizeUnitsAsString().

        Returns:
        Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.
        See Also:
        H265GopSizeUnits

      • hrdBufferFinalFillPercentage

        public final Integer hrdBufferFinalFillPercentage()
        If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment. For the best video quality: Set to 0 or leave blank to automatically determine the final buffer fill percentage.
        Returns:
        If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment. For the best video quality: Set to 0 or leave blank to automatically determine the final buffer fill percentage.

      • hrdBufferInitialFillPercentage

        public final Integer hrdBufferInitialFillPercentage()
        Percentage of the buffer that should initially be filled (HRD buffer model).
        Returns:
        Percentage of the buffer that should initially be filled (HRD buffer model).

      • hrdBufferSize

        public final Integer hrdBufferSize()
        Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
        Returns:
        Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

      • interlaceMode

        public final H265InterlaceMode interlaceMode()
        Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

        If the service returns an enum value that is not available in the current SDK version, interlaceMode will return H265InterlaceMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from interlaceModeAsString().

        Returns:
        Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
        See Also:
        H265InterlaceMode

      • interlaceModeAsString

        public final String interlaceModeAsString()
        Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

        If the service returns an enum value that is not available in the current SDK version, interlaceMode will return H265InterlaceMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from interlaceModeAsString().

        Returns:
        Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.
        See Also:
        H265InterlaceMode

      • maxBitrate

        public final Integer maxBitrate()
        Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
        Returns:
        Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.

      • minIInterval

        public final Integer minIInterval()
        Specify the minimum number of frames allowed between two IDR-frames in your output. This includes frames created at the start of a GOP or a scene change. Use Min I-Interval to improve video compression by varying GOP size when two IDR-frames would be created near each other. For example, if a regular cadence-driven IDR-frame would fall within 5 frames of a scene-change IDR-frame, and you set Min I-interval to 5, then the encoder would only write an IDR-frame for the scene-change. In this way, one GOP is shortened or extended. If a cadence-driven IDR-frame would be further than 5 frames from a scene-change IDR-frame, then the encoder leaves all IDR-frames in place. To use an automatically determined interval: We recommend that you keep this value blank. This allows for MediaConvert to use an optimal setting according to the characteristics of your input video, and results in better video compression. To manually specify an interval: Enter a value from 1 to 30. Use when your downstream systems have specific GOP size requirements. To disable GOP size variance: Enter 0. MediaConvert will only create IDR-frames at the start of your output's cadence-driven GOP. Use when your downstream systems require a regular GOP size.
        Returns:
        Specify the minimum number of frames allowed between two IDR-frames in your output. This includes frames created at the start of a GOP or a scene change. Use Min I-Interval to improve video compression by varying GOP size when two IDR-frames would be created near each other. For example, if a regular cadence-driven IDR-frame would fall within 5 frames of a scene-change IDR-frame, and you set Min I-interval to 5, then the encoder would only write an IDR-frame for the scene-change. In this way, one GOP is shortened or extended. If a cadence-driven IDR-frame would be further than 5 frames from a scene-change IDR-frame, then the encoder leaves all IDR-frames in place. To use an automatically determined interval: We recommend that you keep this value blank. This allows for MediaConvert to use an optimal setting according to the characteristics of your input video, and results in better video compression. To manually specify an interval: Enter a value from 1 to 30. Use when your downstream systems have specific GOP size requirements. To disable GOP size variance: Enter 0. MediaConvert will only create IDR-frames at the start of your output's cadence-driven GOP. Use when your downstream systems require a regular GOP size.

      • numberBFramesBetweenReferenceFrames

        public final Integer numberBFramesBetweenReferenceFrames()
        Specify the number of B-frames between reference frames in this output. For the best video quality: Leave blank. MediaConvert automatically determines the number of B-frames to use based on the characteristics of your input video. To manually specify the number of B-frames between reference frames: Enter an integer from 0 to 7.
        Returns:
        Specify the number of B-frames between reference frames in this output. For the best video quality: Leave blank. MediaConvert automatically determines the number of B-frames to use based on the characteristics of your input video. To manually specify the number of B-frames between reference frames: Enter an integer from 0 to 7.

      • numberReferenceFrames

        public final Integer numberReferenceFrames()
        Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
        Returns:
        Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.

      • parControl

        public final H265ParControl parControl()
        Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

        If the service returns an enum value that is not available in the current SDK version, parControl will return H265ParControl.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from parControlAsString().

        Returns:
        Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
        See Also:
        H265ParControl

      • parControlAsString

        public final String parControlAsString()
        Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

        If the service returns an enum value that is not available in the current SDK version, parControl will return H265ParControl.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from parControlAsString().

        Returns:
        Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.
        See Also:
        H265ParControl

      • parDenominator

        public final Integer parDenominator()
        Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.
        Returns:
        Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

      • parNumerator

        public final Integer parNumerator()
        Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.
        Returns:
        Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.

      • qualityTuningLevel

        public final H265QualityTuningLevel qualityTuningLevel()
        Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.

        If the service returns an enum value that is not available in the current SDK version, qualityTuningLevel will return H265QualityTuningLevel.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from qualityTuningLevelAsString().

        Returns:
        Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
        See Also:
        H265QualityTuningLevel

      • qualityTuningLevelAsString

        public final String qualityTuningLevelAsString()
        Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.

        If the service returns an enum value that is not available in the current SDK version, qualityTuningLevel will return H265QualityTuningLevel.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from qualityTuningLevelAsString().

        Returns:
        Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.
        See Also:
        H265QualityTuningLevel

      • qvbrSettings

        public final H265QvbrSettings qvbrSettings()
        Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode.
        Returns:
        Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode.

      • rateControlMode

        public final H265RateControlMode rateControlMode()
        Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).

        If the service returns an enum value that is not available in the current SDK version, rateControlMode will return H265RateControlMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from rateControlModeAsString().

        Returns:
        Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
        See Also:
        H265RateControlMode

      • rateControlModeAsString

        public final String rateControlModeAsString()
        Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).

        If the service returns an enum value that is not available in the current SDK version, rateControlMode will return H265RateControlMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from rateControlModeAsString().

        Returns:
        Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
        See Also:
        H265RateControlMode

      • scanTypeConversionMode

        public final H265ScanTypeConversionMode scanTypeConversionMode()
        Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

        If the service returns an enum value that is not available in the current SDK version, scanTypeConversionMode will return H265ScanTypeConversionMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from scanTypeConversionModeAsString().

        Returns:
        Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.
        See Also:
        H265ScanTypeConversionMode

      • scanTypeConversionModeAsString

        public final String scanTypeConversionModeAsString()
        Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

        If the service returns an enum value that is not available in the current SDK version, scanTypeConversionMode will return H265ScanTypeConversionMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from scanTypeConversionModeAsString().

        Returns:
        Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.
        See Also:
        H265ScanTypeConversionMode

      • sceneChangeDetect

        public final H265SceneChangeDetect sceneChangeDetect()
        Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.

        If the service returns an enum value that is not available in the current SDK version, sceneChangeDetect will return H265SceneChangeDetect.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from sceneChangeDetectAsString().

        Returns:
        Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
        See Also:
        H265SceneChangeDetect

      • sceneChangeDetectAsString

        public final String sceneChangeDetectAsString()
        Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.

        If the service returns an enum value that is not available in the current SDK version, sceneChangeDetect will return H265SceneChangeDetect.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from sceneChangeDetectAsString().

        Returns:
        Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
        See Also:
        H265SceneChangeDetect

      • slices

        public final Integer slices()
        Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
        Returns:
        Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.

      • slowPal

        public final H265SlowPal slowPal()
        Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.

        If the service returns an enum value that is not available in the current SDK version, slowPal will return H265SlowPal.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from slowPalAsString().

        Returns:
        Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.
        See Also:
        H265SlowPal

      • slowPalAsString

        public final String slowPalAsString()
        Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.

        If the service returns an enum value that is not available in the current SDK version, slowPal will return H265SlowPal.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from slowPalAsString().

        Returns:
        Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.
        See Also:
        H265SlowPal

      • spatialAdaptiveQuantization

        public final H265SpatialAdaptiveQuantization spatialAdaptiveQuantization()
        Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.

        If the service returns an enum value that is not available in the current SDK version, spatialAdaptiveQuantization will return H265SpatialAdaptiveQuantization.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from spatialAdaptiveQuantizationAsString().

        Returns:
        Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
        See Also:
        H265SpatialAdaptiveQuantization

      • spatialAdaptiveQuantizationAsString

        public final String spatialAdaptiveQuantizationAsString()
        Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.

        If the service returns an enum value that is not available in the current SDK version, spatialAdaptiveQuantization will return H265SpatialAdaptiveQuantization.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from spatialAdaptiveQuantizationAsString().

        Returns:
        Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.
        See Also:
        H265SpatialAdaptiveQuantization

      • telecine

        public final H265Telecine telecine()
        This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.

        If the service returns an enum value that is not available in the current SDK version, telecine will return H265Telecine.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from telecineAsString().

        Returns:
        This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
        See Also:
        H265Telecine

      • telecineAsString

        public final String telecineAsString()
        This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.

        If the service returns an enum value that is not available in the current SDK version, telecine will return H265Telecine.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from telecineAsString().

        Returns:
        This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
        See Also:
        H265Telecine

      • temporalAdaptiveQuantization

        public final H265TemporalAdaptiveQuantization temporalAdaptiveQuantization()
        Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.

        If the service returns an enum value that is not available in the current SDK version, temporalAdaptiveQuantization will return H265TemporalAdaptiveQuantization.UNKNOWN_TO_SDK_VERSION . The raw value returned by the service is available from temporalAdaptiveQuantizationAsString().

        Returns:
        Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.
        See Also:
        H265TemporalAdaptiveQuantization

      • temporalAdaptiveQuantizationAsString

        public final String temporalAdaptiveQuantizationAsString()
        Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.

        If the service returns an enum value that is not available in the current SDK version, temporalAdaptiveQuantization will return H265TemporalAdaptiveQuantization.UNKNOWN_TO_SDK_VERSION . The raw value returned by the service is available from temporalAdaptiveQuantizationAsString().

        Returns:
        Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.
        See Also:
        H265TemporalAdaptiveQuantization

      • temporalIds

        public final H265TemporalIds temporalIds()
        Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.

        If the service returns an enum value that is not available in the current SDK version, temporalIds will return H265TemporalIds.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from temporalIdsAsString().

        Returns:
        Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
        See Also:
        H265TemporalIds

      • temporalIdsAsString

        public final String temporalIdsAsString()
        Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.

        If the service returns an enum value that is not available in the current SDK version, temporalIds will return H265TemporalIds.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from temporalIdsAsString().

        Returns:
        Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.
        See Also:
        H265TemporalIds

      • tiles

        public final H265Tiles tiles()
        Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.

        If the service returns an enum value that is not available in the current SDK version, tiles will return H265Tiles.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from tilesAsString().

        Returns:
        Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
        See Also:
        H265Tiles

      • tilesAsString

        public final String tilesAsString()
        Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.

        If the service returns an enum value that is not available in the current SDK version, tiles will return H265Tiles.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from tilesAsString().

        Returns:
        Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.
        See Also:
        H265Tiles

      • writeMp4PackagingType

        public final H265WriteMp4PackagingType writeMp4PackagingType()
        If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.

        If the service returns an enum value that is not available in the current SDK version, writeMp4PackagingType will return H265WriteMp4PackagingType.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from writeMp4PackagingTypeAsString().

        Returns:
        If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
        See Also:
        H265WriteMp4PackagingType

      • writeMp4PackagingTypeAsString

        public final String writeMp4PackagingTypeAsString()
        If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.

        If the service returns an enum value that is not available in the current SDK version, writeMp4PackagingType will return H265WriteMp4PackagingType.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from writeMp4PackagingTypeAsString().

        Returns:
        If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.
        See Also:
        H265WriteMp4PackagingType

      • hashCode

        public final int hashCode()
        Overrides:
        hashCode in class Object

      • equals

        public final boolean equals​(Object obj)
        Overrides:
        equals in class Object

      • toString

        public final String toString()
        Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value.
        Overrides:
        toString in class Object

      • getValueForField

        public final <T> Optional<T> getValueForField​(String fieldName,
                                              Class<T> clazz)