H264Settings (AWS Java SDK :: Services :: AWS Elemental MediaConvert 2.7.28 API)

java.lang.Object
- software.amazon.awssdk.services.mediaconvert.model.H264Settings

All Implemented Interfaces:

Serializable, SdkPojo, ToCopyableBuilder<H264Settings.Builder,H264Settings>
```
@Generated(value="software.amazon.awssdk:codegen")
public final class H264Settings
extends Object
implements SdkPojo, Serializable, ToCopyableBuilder<H264Settings.Builder,H264Settings>
```
Required when you set (Codec) under (VideoDescription)>(CodecSettings) to the value H_264.

See Also:

Serialized Form

Nested Class Summary

Nested Classes
Modifier and Type Class and Description

static interface H264Settings.Builder

Nested Classes
Modifier and Type	Class and Description
`static interface`	`H264Settings.Builder`

Method Summary

All Methods Static Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`H264AdaptiveQuantization`	`adaptiveQuantization()` Adaptive quantization.
`String`	`adaptiveQuantizationAsString()` Adaptive quantization.
`Integer`	`bitrate()` Specify the average bitrate in bits per second.
`static H264Settings.Builder`	`builder()`
`H264CodecLevel`	`codecLevel()` Specify an H.264 level that is consistent with your output video settings.
`String`	`codecLevelAsString()` Specify an H.264 level that is consistent with your output video settings.
`H264CodecProfile`	`codecProfile()` H.264 Profile.
`String`	`codecProfileAsString()` H.264 Profile.
`H264DynamicSubGop`	`dynamicSubGop()` Choose Adaptive to improve subjective video quality for high-motion content.
`String`	`dynamicSubGopAsString()` Choose Adaptive to improve subjective video quality for high-motion content.
`H264EntropyEncoding`	`entropyEncoding()` Entropy encoding mode.
`String`	`entropyEncodingAsString()` Entropy encoding mode.
`boolean`	`equals(Object obj)`
`boolean`	`equalsBySdkFields(Object obj)`
`H264FieldEncoding`	`fieldEncoding()` Choosing FORCE_FIELD disables PAFF encoding for interlaced outputs.
`String`	`fieldEncodingAsString()` Choosing FORCE_FIELD disables PAFF encoding for interlaced outputs.
`H264FlickerAdaptiveQuantization`	`flickerAdaptiveQuantization()` Adjust quantization within each frame to reduce flicker or 'pop' on I-frames.
`String`	`flickerAdaptiveQuantizationAsString()` Adjust quantization within each frame to reduce flicker or 'pop' on I-frames.
`H264FramerateControl`	`framerateControl()` If you are using the console, use the Framerate setting to specify the frame rate for this output.
`String`	`framerateControlAsString()` If you are using the console, use the Framerate setting to specify the frame rate for this output.
`H264FramerateConversionAlgorithm`	`framerateConversionAlgorithm()` When set to INTERPOLATE, produces smoother motion during frame rate conversion.
`String`	`framerateConversionAlgorithmAsString()` When set to INTERPOLATE, produces smoother motion during frame rate conversion.
`Integer`	`framerateDenominator()` When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction.
`Integer`	`framerateNumerator()` Frame rate numerator - frame rate is a fraction, e.g.
`<T> Optional<T>`	`getValueForField(String fieldName, Class<T> clazz)`
`H264GopBReference`	`gopBReference()` If enable, use reference B frames for GOP structures that have B frames > 1.
`String`	`gopBReferenceAsString()` If enable, use reference B frames for GOP structures that have B frames > 1.
`Integer`	`gopClosedCadence()` Frequency of closed GOPs.
`Double`	`gopSize()` GOP Length (keyframe interval) in frames or seconds.
`H264GopSizeUnits`	`gopSizeUnits()` Indicates if the GOP Size in H264 is specified in frames or seconds.
`String`	`gopSizeUnitsAsString()` Indicates if the GOP Size in H264 is specified in frames or seconds.
`int`	`hashCode()`
`Integer`	`hrdBufferInitialFillPercentage()` Percentage of the buffer that should initially be filled (HRD buffer model).
`Integer`	`hrdBufferSize()` Size of buffer (HRD buffer model) in bits.
`H264InterlaceMode`	`interlaceMode()` Use Interlace mode (InterlaceMode) to choose the scan line type for the output.
`String`	`interlaceModeAsString()` Use Interlace mode (InterlaceMode) to choose the scan line type for the output.
`Integer`	`maxBitrate()` Maximum bitrate in bits/second.
`Integer`	`minIInterval()` Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection.
`Integer`	`numberBFramesBetweenReferenceFrames()` Number of B-frames between reference frames.
`Integer`	`numberReferenceFrames()` Number of reference frames to use.
`H264ParControl`	`parControl()` Using the API, enable ParFollowSource if you want the service to use the pixel aspect ratio from the input.
`String`	`parControlAsString()` Using the API, enable ParFollowSource if you want the service to use the pixel aspect ratio from the input.
`Integer`	`parDenominator()` Pixel Aspect Ratio denominator.
`Integer`	`parNumerator()` Pixel Aspect Ratio numerator.
`H264QualityTuningLevel`	`qualityTuningLevel()` Use Quality tuning level (H264QualityTuningLevel) to specifiy whether to use fast single-pass, high-quality singlepass, or high-quality multipass video encoding.
`String`	`qualityTuningLevelAsString()` Use Quality tuning level (H264QualityTuningLevel) to specifiy whether to use fast single-pass, high-quality singlepass, or high-quality multipass video encoding.
`H264QvbrSettings`	`qvbrSettings()` Settings for quality-defined variable bitrate encoding with the H.264 codec.
`H264RateControlMode`	`rateControlMode()` Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
`String`	`rateControlModeAsString()` Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
`H264RepeatPps`	`repeatPps()` Places a PPS header on each encoded picture, even if repeated.
`String`	`repeatPpsAsString()` Places a PPS header on each encoded picture, even if repeated.
`H264SceneChangeDetect`	`sceneChangeDetect()` Enable this setting to insert I-frames at scene changes that the service automatically detects.
`String`	`sceneChangeDetectAsString()` Enable this setting to insert I-frames at scene changes that the service automatically detects.
`List<SdkField<?>>`	`sdkFields()`
`static Class<? extends H264Settings.Builder>`	`serializableBuilderClass()`
`Integer`	`slices()` Number of slices per picture.
`H264SlowPal`	`slowPal()` Enables Slow PAL rate conversion.
`String`	`slowPalAsString()` Enables Slow PAL rate conversion.
`Integer`	`softness()` Softness.
`H264SpatialAdaptiveQuantization`	`spatialAdaptiveQuantization()` Adjust quantization within each frame based on spatial variation of content complexity.
`String`	`spatialAdaptiveQuantizationAsString()` Adjust quantization within each frame based on spatial variation of content complexity.
`H264Syntax`	`syntax()` Produces a bitstream compliant with SMPTE RP-2027.
`String`	`syntaxAsString()` Produces a bitstream compliant with SMPTE RP-2027.
`H264Telecine`	`telecine()` This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970.
`String`	`telecineAsString()` This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970.
`H264TemporalAdaptiveQuantization`	`temporalAdaptiveQuantization()` Adjust quantization within each frame based on temporal variation of content complexity.
`String`	`temporalAdaptiveQuantizationAsString()` Adjust quantization within each frame based on temporal variation of content complexity.
`H264Settings.Builder`	`toBuilder()`
`String`	`toString()` Returns a string representation of this object.
`H264UnregisteredSeiTimecode`	`unregisteredSeiTimecode()` Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
`String`	`unregisteredSeiTimecodeAsString()` Inserts timecode for each frame as 4 bytes of an unregistered SEI message.

Methods inherited from class java.lang.Object
clone, finalize, getClass, notify, notifyAll, wait, wait, wait

Methods inherited from interface software.amazon.awssdk.utils.builder.ToCopyableBuilder
copy

- Method Detail
  - adaptiveQuantization
```
public H264AdaptiveQuantization adaptiveQuantization()
```
    Adaptive quantization. Allows intra-frame quantizers to vary to improve visual quality.
    If the service returns an enum value that is not available in the current SDK version, adaptiveQuantization will return H264AdaptiveQuantization.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from adaptiveQuantizationAsString().
    
    Returns:
    
    Adaptive quantization. Allows intra-frame quantizers to vary to improve visual quality.
    
    See Also:
    
    H264AdaptiveQuantization
  - adaptiveQuantizationAsString
```
public String adaptiveQuantizationAsString()
```
    Adaptive quantization. Allows intra-frame quantizers to vary to improve visual quality.
    If the service returns an enum value that is not available in the current SDK version, adaptiveQuantization will return H264AdaptiveQuantization.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from adaptiveQuantizationAsString().
    
    Returns:
    
    Adaptive quantization. Allows intra-frame quantizers to vary to improve visual quality.
    
    See Also:
    
    H264AdaptiveQuantization
  - bitrate
```
public Integer bitrate()
```
    Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
    
    Returns:
    
    Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.
  - codecLevel
```
public H264CodecLevel codecLevel()
```
    Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
    If the service returns an enum value that is not available in the current SDK version, codecLevel will return H264CodecLevel.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from codecLevelAsString().
    
    Returns:
    
    Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
    
    See Also:
    
    H264CodecLevel
  - codecLevelAsString
```
public String codecLevelAsString()
```
    Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
    If the service returns an enum value that is not available in the current SDK version, codecLevel will return H264CodecLevel.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from codecLevelAsString().
    
    Returns:
    
    Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto (AUTO).
    
    See Also:
    
    H264CodecLevel
  - codecProfile
```
public H264CodecProfile codecProfile()
```
    H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
    If the service returns an enum value that is not available in the current SDK version, codecProfile will return H264CodecProfile.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from codecProfileAsString().
    
    Returns:
    
    H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
    
    See Also:
    
    H264CodecProfile
  - codecProfileAsString
```
public String codecProfileAsString()
```
    H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
    If the service returns an enum value that is not available in the current SDK version, codecProfile will return H264CodecProfile.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from codecProfileAsString().
    
    Returns:
    
    H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.
    
    See Also:
    
    H264CodecProfile
  - dynamicSubGop
```
public H264DynamicSubGop dynamicSubGop()
```
    Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
    If the service returns an enum value that is not available in the current SDK version, dynamicSubGop will return H264DynamicSubGop.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from dynamicSubGopAsString().
    
    Returns:
    
    Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
    
    See Also:
    
    H264DynamicSubGop
  - dynamicSubGopAsString
```
public String dynamicSubGopAsString()
```
    Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
    If the service returns an enum value that is not available in the current SDK version, dynamicSubGop will return H264DynamicSubGop.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from dynamicSubGopAsString().
    
    Returns:
    
    Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames (numberBFramesBetweenReferenceFrames).
    
    See Also:
    
    H264DynamicSubGop
  - entropyEncoding
```
public H264EntropyEncoding entropyEncoding()
```
    Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
    If the service returns an enum value that is not available in the current SDK version, entropyEncoding will return H264EntropyEncoding.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from entropyEncodingAsString().
    
    Returns:
    
    Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
    
    See Also:
    
    H264EntropyEncoding
  - entropyEncodingAsString
```
public String entropyEncodingAsString()
```
    Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
    If the service returns an enum value that is not available in the current SDK version, entropyEncoding will return H264EntropyEncoding.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from entropyEncodingAsString().
    
    Returns:
    
    Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.
    
    See Also:
    
    H264EntropyEncoding
  - fieldEncoding
```
public H264FieldEncoding fieldEncoding()
```
    Choosing FORCE_FIELD disables PAFF encoding for interlaced outputs.
    If the service returns an enum value that is not available in the current SDK version, fieldEncoding will return H264FieldEncoding.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from fieldEncodingAsString().
    
    Returns:
    
    Choosing FORCE_FIELD disables PAFF encoding for interlaced outputs.
    
    See Also:
    
    H264FieldEncoding
  - fieldEncodingAsString
```
public String fieldEncodingAsString()
```
    Choosing FORCE_FIELD disables PAFF encoding for interlaced outputs.
    If the service returns an enum value that is not available in the current SDK version, fieldEncoding will return H264FieldEncoding.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from fieldEncodingAsString().
    
    Returns:
    
    Choosing FORCE_FIELD disables PAFF encoding for interlaced outputs.
    
    See Also:
    
    H264FieldEncoding
  - flickerAdaptiveQuantization
```
public H264FlickerAdaptiveQuantization flickerAdaptiveQuantization()
```
    Adjust quantization within each frame to reduce flicker or 'pop' on I-frames.
    If the service returns an enum value that is not available in the current SDK version, flickerAdaptiveQuantization will return H264FlickerAdaptiveQuantization.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from flickerAdaptiveQuantizationAsString().
    
    Returns:
    
    Adjust quantization within each frame to reduce flicker or 'pop' on I-frames.
    
    See Also:
    
    H264FlickerAdaptiveQuantization
  - flickerAdaptiveQuantizationAsString
```
public String flickerAdaptiveQuantizationAsString()
```
    Adjust quantization within each frame to reduce flicker or 'pop' on I-frames.
    If the service returns an enum value that is not available in the current SDK version, flickerAdaptiveQuantization will return H264FlickerAdaptiveQuantization.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from flickerAdaptiveQuantizationAsString().
    
    Returns:
    
    Adjust quantization within each frame to reduce flicker or 'pop' on I-frames.
    
    See Also:
    
    H264FlickerAdaptiveQuantization
  - framerateControl
```
public H264FramerateControl framerateControl()
```
    If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
    If the service returns an enum value that is not available in the current SDK version, framerateControl will return H264FramerateControl.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from framerateControlAsString().
    
    Returns:
    
    If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
    
    See Also:
    
    H264FramerateControl
  - framerateControlAsString
```
public String framerateControlAsString()
```
    If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
    If the service returns an enum value that is not available in the current SDK version, framerateControl will return H264FramerateControl.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from framerateControlAsString().
    
    Returns:
    
    If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction. If you are creating your transcoding job specification as a JSON file without the console, use FramerateControl to specify which value the service uses for the frame rate for this output. Choose INITIALIZE_FROM_SOURCE if you want the service to use the frame rate from the input. Choose SPECIFIED if you want the service to use the frame rate you specify in the settings FramerateNumerator and FramerateDenominator.
    
    See Also:
    
    H264FramerateControl
  - framerateConversionAlgorithm
```
public H264FramerateConversionAlgorithm framerateConversionAlgorithm()
```
    When set to INTERPOLATE, produces smoother motion during frame rate conversion.
    If the service returns an enum value that is not available in the current SDK version, framerateConversionAlgorithm will return H264FramerateConversionAlgorithm.UNKNOWN_TO_SDK_VERSION . The raw value returned by the service is available from framerateConversionAlgorithmAsString().
    
    Returns:
    
    When set to INTERPOLATE, produces smoother motion during frame rate conversion.
    
    See Also:
    
    H264FramerateConversionAlgorithm
  - framerateConversionAlgorithmAsString
```
public String framerateConversionAlgorithmAsString()
```
    When set to INTERPOLATE, produces smoother motion during frame rate conversion.
    If the service returns an enum value that is not available in the current SDK version, framerateConversionAlgorithm will return H264FramerateConversionAlgorithm.UNKNOWN_TO_SDK_VERSION . The raw value returned by the service is available from framerateConversionAlgorithmAsString().
    
    Returns:
    
    When set to INTERPOLATE, produces smoother motion during frame rate conversion.
    
    See Also:
    
    H264FramerateConversionAlgorithm
  - framerateDenominator
```
public Integer framerateDenominator()
```
    When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
    
    Returns:
    
    When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.
  - framerateNumerator
```
public Integer framerateNumerator()
```
    Frame rate numerator - frame rate is a fraction, e.g. 24000 / 1001 = 23.976 fps.
    
    Returns:
    
    Frame rate numerator - frame rate is a fraction, e.g. 24000 / 1001 = 23.976 fps.
  - gopBReference
```
public H264GopBReference gopBReference()
```
    If enable, use reference B frames for GOP structures that have B frames > 1.
    If the service returns an enum value that is not available in the current SDK version, gopBReference will return H264GopBReference.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from gopBReferenceAsString().
    
    Returns:
    
    If enable, use reference B frames for GOP structures that have B frames > 1.
    
    See Also:
    
    H264GopBReference
  - gopBReferenceAsString
```
public String gopBReferenceAsString()
```
    If enable, use reference B frames for GOP structures that have B frames > 1.
    If the service returns an enum value that is not available in the current SDK version, gopBReference will return H264GopBReference.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from gopBReferenceAsString().
    
    Returns:
    
    If enable, use reference B frames for GOP structures that have B frames > 1.
    
    See Also:
    
    H264GopBReference
  - gopClosedCadence
```
public Integer gopClosedCadence()
```
    Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
    
    Returns:
    
    Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
  - gopSize
```
public Double gopSize()
```
    GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
    
    Returns:
    
    GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
  - gopSizeUnits
```
public H264GopSizeUnits gopSizeUnits()
```
    Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
    If the service returns an enum value that is not available in the current SDK version, gopSizeUnits will return H264GopSizeUnits.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from gopSizeUnitsAsString().
    
    Returns:
    
    Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
    
    See Also:
    
    H264GopSizeUnits
  - gopSizeUnitsAsString
```
public String gopSizeUnitsAsString()
```
    Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
    If the service returns an enum value that is not available in the current SDK version, gopSizeUnits will return H264GopSizeUnits.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from gopSizeUnitsAsString().
    
    Returns:
    
    Indicates if the GOP Size in H264 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
    
    See Also:
    
    H264GopSizeUnits
  - hrdBufferInitialFillPercentage
```
public Integer hrdBufferInitialFillPercentage()
```
    Percentage of the buffer that should initially be filled (HRD buffer model).
    
    Returns:
    
    Percentage of the buffer that should initially be filled (HRD buffer model).
  - hrdBufferSize
```
public Integer hrdBufferSize()
```
    Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
    
    Returns:
    
    Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.
  - interlaceMode
```
public H264InterlaceMode interlaceMode()
```
    Use Interlace mode (InterlaceMode) to choose the scan line type for the output. * Top Field First (TOP_FIELD) and Bottom Field First (BOTTOM_FIELD) produce interlaced output with the entire output having the same field polarity (top or bottom first). * Follow, Default Top (FOLLOW_TOP_FIELD) and Follow, Default Bottom (FOLLOW_BOTTOM_FIELD) use the same field polarity as the source. Therefore, behavior depends on the input scan type, as follows. - If the source is interlaced, the output will be interlaced with the same polarity as the source (it will follow the source). The output could therefore be a mix of "top field first" and "bottom field first". - If the source is progressive, the output will be interlaced with "top field first" or "bottom field first" polarity, depending on which of the Follow options you chose.
    If the service returns an enum value that is not available in the current SDK version, interlaceMode will return H264InterlaceMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from interlaceModeAsString().
    
    Returns:
    
    Use Interlace mode (InterlaceMode) to choose the scan line type for the output. * Top Field First (TOP_FIELD) and Bottom Field First (BOTTOM_FIELD) produce interlaced output with the entire output having the same field polarity (top or bottom first). * Follow, Default Top (FOLLOW_TOP_FIELD) and Follow, Default Bottom (FOLLOW_BOTTOM_FIELD) use the same field polarity as the source. Therefore, behavior depends on the input scan type, as follows. - If the source is interlaced, the output will be interlaced with the same polarity as the source (it will follow the source). The output could therefore be a mix of "top field first" and "bottom field first". - If the source is progressive, the output will be interlaced with "top field first" or "bottom field first" polarity, depending on which of the Follow options you chose.
    
    See Also:
    
    H264InterlaceMode
  - interlaceModeAsString
```
public String interlaceModeAsString()
```
    Use Interlace mode (InterlaceMode) to choose the scan line type for the output. * Top Field First (TOP_FIELD) and Bottom Field First (BOTTOM_FIELD) produce interlaced output with the entire output having the same field polarity (top or bottom first). * Follow, Default Top (FOLLOW_TOP_FIELD) and Follow, Default Bottom (FOLLOW_BOTTOM_FIELD) use the same field polarity as the source. Therefore, behavior depends on the input scan type, as follows. - If the source is interlaced, the output will be interlaced with the same polarity as the source (it will follow the source). The output could therefore be a mix of "top field first" and "bottom field first". - If the source is progressive, the output will be interlaced with "top field first" or "bottom field first" polarity, depending on which of the Follow options you chose.
    If the service returns an enum value that is not available in the current SDK version, interlaceMode will return H264InterlaceMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from interlaceModeAsString().
    
    Returns:
    
    Use Interlace mode (InterlaceMode) to choose the scan line type for the output. * Top Field First (TOP_FIELD) and Bottom Field First (BOTTOM_FIELD) produce interlaced output with the entire output having the same field polarity (top or bottom first). * Follow, Default Top (FOLLOW_TOP_FIELD) and Follow, Default Bottom (FOLLOW_BOTTOM_FIELD) use the same field polarity as the source. Therefore, behavior depends on the input scan type, as follows. - If the source is interlaced, the output will be interlaced with the same polarity as the source (it will follow the source). The output could therefore be a mix of "top field first" and "bottom field first". - If the source is progressive, the output will be interlaced with "top field first" or "bottom field first" polarity, depending on which of the Follow options you chose.
    
    See Also:
    
    H264InterlaceMode
  - maxBitrate
```
public Integer maxBitrate()
```
    Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
    
    Returns:
    
    Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.
  - minIInterval
```
public Integer minIInterval()
```
    Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
    
    Returns:
    
    Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. This setting is only used when Scene Change Detect is enabled. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
  - numberBFramesBetweenReferenceFrames
```
public Integer numberBFramesBetweenReferenceFrames()
```
    Number of B-frames between reference frames.
    
    Returns:
    
    Number of B-frames between reference frames.
  - numberReferenceFrames
```
public Integer numberReferenceFrames()
```
    Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
    
    Returns:
    
    Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
  - parControl
```
public H264ParControl parControl()
```
    Using the API, enable ParFollowSource if you want the service to use the pixel aspect ratio from the input. Using the console, do this by choosing Follow source for Pixel aspect ratio.
    If the service returns an enum value that is not available in the current SDK version, parControl will return H264ParControl.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from parControlAsString().
    
    Returns:
    
    Using the API, enable ParFollowSource if you want the service to use the pixel aspect ratio from the input. Using the console, do this by choosing Follow source for Pixel aspect ratio.
    
    See Also:
    
    H264ParControl
  - parControlAsString
```
public String parControlAsString()
```
    Using the API, enable ParFollowSource if you want the service to use the pixel aspect ratio from the input. Using the console, do this by choosing Follow source for Pixel aspect ratio.
    If the service returns an enum value that is not available in the current SDK version, parControl will return H264ParControl.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from parControlAsString().
    
    Returns:
    
    Using the API, enable ParFollowSource if you want the service to use the pixel aspect ratio from the input. Using the console, do this by choosing Follow source for Pixel aspect ratio.
    
    See Also:
    
    H264ParControl
  - parDenominator
```
public Integer parDenominator()
```
    Pixel Aspect Ratio denominator.
    
    Returns:
    
    Pixel Aspect Ratio denominator.
  - parNumerator
```
public Integer parNumerator()
```
    Pixel Aspect Ratio numerator.
    
    Returns:
    
    Pixel Aspect Ratio numerator.
  - qualityTuningLevel
```
public H264QualityTuningLevel qualityTuningLevel()
```
    Use Quality tuning level (H264QualityTuningLevel) to specifiy whether to use fast single-pass, high-quality singlepass, or high-quality multipass video encoding.
    If the service returns an enum value that is not available in the current SDK version, qualityTuningLevel will return H264QualityTuningLevel.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from qualityTuningLevelAsString().
    
    Returns:
    
    Use Quality tuning level (H264QualityTuningLevel) to specifiy whether to use fast single-pass, high-quality singlepass, or high-quality multipass video encoding.
    
    See Also:
    
    H264QualityTuningLevel
  - qualityTuningLevelAsString
```
public String qualityTuningLevelAsString()
```
    Use Quality tuning level (H264QualityTuningLevel) to specifiy whether to use fast single-pass, high-quality singlepass, or high-quality multipass video encoding.
    If the service returns an enum value that is not available in the current SDK version, qualityTuningLevel will return H264QualityTuningLevel.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from qualityTuningLevelAsString().
    
    Returns:
    
    Use Quality tuning level (H264QualityTuningLevel) to specifiy whether to use fast single-pass, high-quality singlepass, or high-quality multipass video encoding.
    
    See Also:
    
    H264QualityTuningLevel
  - qvbrSettings
```
public H264QvbrSettings qvbrSettings()
```
    Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
    
    Returns:
    
    Settings for quality-defined variable bitrate encoding with the H.264 codec. Required when you set Rate control mode to QVBR. Not valid when you set Rate control mode to a value other than QVBR, or when you don't define Rate control mode.
  - rateControlMode
```
public H264RateControlMode rateControlMode()
```
    Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
    If the service returns an enum value that is not available in the current SDK version, rateControlMode will return H264RateControlMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from rateControlModeAsString().
    
    Returns:
    
    Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
    
    See Also:
    
    H264RateControlMode
  - rateControlModeAsString
```
public String rateControlModeAsString()
```
    Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
    If the service returns an enum value that is not available in the current SDK version, rateControlMode will return H264RateControlMode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from rateControlModeAsString().
    
    Returns:
    
    Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).
    
    See Also:
    
    H264RateControlMode
  - repeatPps
```
public H264RepeatPps repeatPps()
```
    Places a PPS header on each encoded picture, even if repeated.
    If the service returns an enum value that is not available in the current SDK version, repeatPps will return H264RepeatPps.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from repeatPpsAsString().
    
    Returns:
    
    Places a PPS header on each encoded picture, even if repeated.
    
    See Also:
    
    H264RepeatPps
  - repeatPpsAsString
```
public String repeatPpsAsString()
```
    Places a PPS header on each encoded picture, even if repeated.
    If the service returns an enum value that is not available in the current SDK version, repeatPps will return H264RepeatPps.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from repeatPpsAsString().
    
    Returns:
    
    Places a PPS header on each encoded picture, even if repeated.
    
    See Also:
    
    H264RepeatPps
  - sceneChangeDetect
```
public H264SceneChangeDetect sceneChangeDetect()
```
    Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
    If the service returns an enum value that is not available in the current SDK version, sceneChangeDetect will return H264SceneChangeDetect.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from sceneChangeDetectAsString().
    
    Returns:
    
    Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
    
    See Also:
    
    H264SceneChangeDetect
  - sceneChangeDetectAsString
```
public String sceneChangeDetectAsString()
```
    Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
    If the service returns an enum value that is not available in the current SDK version, sceneChangeDetect will return H264SceneChangeDetect.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from sceneChangeDetectAsString().
    
    Returns:
    
    Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection (TRANSITION_DETECTION) for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.
    
    See Also:
    
    H264SceneChangeDetect
  - slices
```
public Integer slices()
```
    Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
    
    Returns:
    
    Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.
  - slowPal
```
public H264SlowPal slowPal()
```
    Enables Slow PAL rate conversion. 23.976fps and 24fps input is relabeled as 25fps, and audio is sped up correspondingly.
    If the service returns an enum value that is not available in the current SDK version, slowPal will return H264SlowPal.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from slowPalAsString().
    
    Returns:
    
    Enables Slow PAL rate conversion. 23.976fps and 24fps input is relabeled as 25fps, and audio is sped up correspondingly.
    
    See Also:
    
    H264SlowPal
  - slowPalAsString
```
public String slowPalAsString()
```
    Enables Slow PAL rate conversion. 23.976fps and 24fps input is relabeled as 25fps, and audio is sped up correspondingly.
    If the service returns an enum value that is not available in the current SDK version, slowPal will return H264SlowPal.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from slowPalAsString().
    
    Returns:
    
    Enables Slow PAL rate conversion. 23.976fps and 24fps input is relabeled as 25fps, and audio is sped up correspondingly.
    
    See Also:
    
    H264SlowPal
  - softness
```
public Integer softness()
```
    Softness. Selects quantizer matrix, larger values reduce high-frequency content in the encoded image.
    
    Returns:
    
    Softness. Selects quantizer matrix, larger values reduce high-frequency content in the encoded image.
  - spatialAdaptiveQuantization
```
public H264SpatialAdaptiveQuantization spatialAdaptiveQuantization()
```
    Adjust quantization within each frame based on spatial variation of content complexity.
    If the service returns an enum value that is not available in the current SDK version, spatialAdaptiveQuantization will return H264SpatialAdaptiveQuantization.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from spatialAdaptiveQuantizationAsString().
    
    Returns:
    
    Adjust quantization within each frame based on spatial variation of content complexity.
    
    See Also:
    
    H264SpatialAdaptiveQuantization
  - spatialAdaptiveQuantizationAsString
```
public String spatialAdaptiveQuantizationAsString()
```
    Adjust quantization within each frame based on spatial variation of content complexity.
    If the service returns an enum value that is not available in the current SDK version, spatialAdaptiveQuantization will return H264SpatialAdaptiveQuantization.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from spatialAdaptiveQuantizationAsString().
    
    Returns:
    
    Adjust quantization within each frame based on spatial variation of content complexity.
    
    See Also:
    
    H264SpatialAdaptiveQuantization
  - syntax
```
public H264Syntax syntax()
```
    Produces a bitstream compliant with SMPTE RP-2027.
    If the service returns an enum value that is not available in the current SDK version, syntax will return H264Syntax.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from syntaxAsString().
    
    Returns:
    
    Produces a bitstream compliant with SMPTE RP-2027.
    
    See Also:
    
    H264Syntax
  - syntaxAsString
```
public String syntaxAsString()
```
    Produces a bitstream compliant with SMPTE RP-2027.
    If the service returns an enum value that is not available in the current SDK version, syntax will return H264Syntax.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from syntaxAsString().
    
    Returns:
    
    Produces a bitstream compliant with SMPTE RP-2027.
    
    See Also:
    
    H264Syntax
  - telecine
```
public H264Telecine telecine()
```
    This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
    If the service returns an enum value that is not available in the current SDK version, telecine will return H264Telecine.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from telecineAsString().
    
    Returns:
    
    This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
    
    See Also:
    
    H264Telecine
  - telecineAsString
```
public String telecineAsString()
```
    This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
    If the service returns an enum value that is not available in the current SDK version, telecine will return H264Telecine.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from telecineAsString().
    
    Returns:
    
    This field applies only if the Streams > Advanced > Framerate (framerate) field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field (deinterlace_mode) and the Streams > Advanced > Interlaced Mode field (interlace_mode) to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.
    
    See Also:
    
    H264Telecine
  - temporalAdaptiveQuantization
```
public H264TemporalAdaptiveQuantization temporalAdaptiveQuantization()
```
    Adjust quantization within each frame based on temporal variation of content complexity.
    If the service returns an enum value that is not available in the current SDK version, temporalAdaptiveQuantization will return H264TemporalAdaptiveQuantization.UNKNOWN_TO_SDK_VERSION . The raw value returned by the service is available from temporalAdaptiveQuantizationAsString().
    
    Returns:
    
    Adjust quantization within each frame based on temporal variation of content complexity.
    
    See Also:
    
    H264TemporalAdaptiveQuantization
  - temporalAdaptiveQuantizationAsString
```
public String temporalAdaptiveQuantizationAsString()
```
    Adjust quantization within each frame based on temporal variation of content complexity.
    If the service returns an enum value that is not available in the current SDK version, temporalAdaptiveQuantization will return H264TemporalAdaptiveQuantization.UNKNOWN_TO_SDK_VERSION . The raw value returned by the service is available from temporalAdaptiveQuantizationAsString().
    
    Returns:
    
    Adjust quantization within each frame based on temporal variation of content complexity.
    
    See Also:
    
    H264TemporalAdaptiveQuantization
  - unregisteredSeiTimecode
```
public H264UnregisteredSeiTimecode unregisteredSeiTimecode()
```
    Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
    If the service returns an enum value that is not available in the current SDK version, unregisteredSeiTimecode will return H264UnregisteredSeiTimecode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from unregisteredSeiTimecodeAsString().
    
    Returns:
    
    Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
    
    See Also:
    
    H264UnregisteredSeiTimecode
  - unregisteredSeiTimecodeAsString
```
public String unregisteredSeiTimecodeAsString()
```
    Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
    If the service returns an enum value that is not available in the current SDK version, unregisteredSeiTimecode will return H264UnregisteredSeiTimecode.UNKNOWN_TO_SDK_VERSION. The raw value returned by the service is available from unregisteredSeiTimecodeAsString().
    
    Returns:
    
    Inserts timecode for each frame as 4 bytes of an unregistered SEI message.
    
    See Also:
    
    H264UnregisteredSeiTimecode
  - toBuilder
```
public H264Settings.Builder toBuilder()
```
    Specified by:
    
    toBuilder in interface ToCopyableBuilder<H264Settings.Builder,H264Settings>
  - builder
```
public static H264Settings.Builder builder()
```
  - serializableBuilderClass
```
public static Class<? extends H264Settings.Builder> serializableBuilderClass()
```
  - hashCode
```
public int hashCode()
```
    Overrides:
    
    hashCode in class Object
  - equals
```
public boolean equals(Object obj)
```
    Overrides:
    
    equals in class Object
  - equalsBySdkFields
```
public boolean equalsBySdkFields(Object obj)
```
    Specified by:
    
    equalsBySdkFields in interface SdkPojo
  - toString
```
public String toString()
```
    Returns a string representation of this object. This is useful for testing and debugging. Sensitive data will be redacted from this string using a placeholder value.
    
    Overrides:
    
    toString in class Object
  - getValueForField
```
public <T> Optional<T> getValueForField(String fieldName,
                                        Class<T> clazz)
```
  - sdkFields
```
public List<SdkField<?>> sdkFields()
```
    Specified by:
    
    sdkFields in interface SdkPojo

Class H264Settings

Nested Class Summary

Method Summary

Methods inherited from class java.lang.Object

Methods inherited from interface software.amazon.awssdk.utils.builder.ToCopyableBuilder

Method Detail

adaptiveQuantization

adaptiveQuantizationAsString

bitrate

codecLevel

codecLevelAsString

codecProfile

codecProfileAsString

dynamicSubGop

dynamicSubGopAsString

entropyEncoding

entropyEncodingAsString

fieldEncoding

fieldEncodingAsString

flickerAdaptiveQuantization

flickerAdaptiveQuantizationAsString

framerateControl

framerateControlAsString

framerateConversionAlgorithm

framerateConversionAlgorithmAsString

framerateDenominator

framerateNumerator

gopBReference

gopBReferenceAsString

gopClosedCadence

gopSize

gopSizeUnits

gopSizeUnitsAsString

hrdBufferInitialFillPercentage

hrdBufferSize

interlaceMode

interlaceModeAsString

maxBitrate

minIInterval

numberBFramesBetweenReferenceFrames

numberReferenceFrames

parControl

parControlAsString

parDenominator

parNumerator

qualityTuningLevel

qualityTuningLevelAsString

qvbrSettings

rateControlMode

rateControlModeAsString

repeatPps

repeatPpsAsString

sceneChangeDetect

sceneChangeDetectAsString

slices

slowPal

slowPalAsString

softness

spatialAdaptiveQuantization

spatialAdaptiveQuantizationAsString

syntax

syntaxAsString

telecine

telecineAsString

temporalAdaptiveQuantization

temporalAdaptiveQuantizationAsString

unregisteredSeiTimecode

unregisteredSeiTimecodeAsString

toBuilder

builder

serializableBuilderClass

hashCode

equals

equalsBySdkFields

toString

getValueForField

sdkFields