Package software.amazon.awssdk.services.rds.model

Interface RestoreDbInstanceFromDbSnapshotRequest.Builder

    • Method Detail

      • dbInstanceIdentifier

        RestoreDbInstanceFromDbSnapshotRequest.Builder dbInstanceIdentifier​(String dbInstanceIdentifier)

        The name of the DB instance to create from the DB snapshot. This parameter isn't case-sensitive.

        Constraints:

        • Must contain from 1 to 63 numbers, letters, or hyphens.

        • First character must be a letter.

        • Can't end with a hyphen or contain two consecutive hyphens.

        Example: my-snapshot-id

        Parameters:
        dbInstanceIdentifier - The name of the DB instance to create from the DB snapshot. This parameter isn't case-sensitive.

        Constraints:

        • Must contain from 1 to 63 numbers, letters, or hyphens.

        • First character must be a letter.

        • Can't end with a hyphen or contain two consecutive hyphens.

        Example: my-snapshot-id

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • dbSnapshotIdentifier

        RestoreDbInstanceFromDbSnapshotRequest.Builder dbSnapshotIdentifier​(String dbSnapshotIdentifier)

        The identifier for the DB snapshot to restore from.

        Constraints:

        • Must match the identifier of an existing DB snapshot.

        • Can't be specified when DBClusterSnapshotIdentifier is specified.

        • Must be specified when DBClusterSnapshotIdentifier isn't specified.

        • If you are restoring from a shared manual DB snapshot, the DBSnapshotIdentifier must be the ARN of the shared DB snapshot.

        Parameters:
        dbSnapshotIdentifier - The identifier for the DB snapshot to restore from.

        Constraints:

        • Must match the identifier of an existing DB snapshot.

        • Can't be specified when DBClusterSnapshotIdentifier is specified.

        • Must be specified when DBClusterSnapshotIdentifier isn't specified.

        • If you are restoring from a shared manual DB snapshot, the DBSnapshotIdentifier must be the ARN of the shared DB snapshot.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • dbInstanceClass

        RestoreDbInstanceFromDbSnapshotRequest.Builder dbInstanceClass​(String dbInstanceClass)

        The compute and memory capacity of the Amazon RDS DB instance, for example db.m4.large. Not all DB instance classes are available in all Amazon Web Services Regions, or for all database engines. For the full list of DB instance classes, and availability for your engine, see DB Instance Class in the Amazon RDS User Guide.

        Default: The same DBInstanceClass as the original DB instance.

        Parameters:
        dbInstanceClass - The compute and memory capacity of the Amazon RDS DB instance, for example db.m4.large. Not all DB instance classes are available in all Amazon Web Services Regions, or for all database engines. For the full list of DB instance classes, and availability for your engine, see DB Instance Class in the Amazon RDS User Guide.

        Default: The same DBInstanceClass as the original DB instance.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • port

        RestoreDbInstanceFromDbSnapshotRequest.Builder port​(Integer port)

        The port number on which the database accepts connections.

        Default: The same port as the original DB instance

        Constraints: Value must be 1150-65535

        Parameters:
        port - The port number on which the database accepts connections.

        Default: The same port as the original DB instance

        Constraints: Value must be 1150-65535

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • availabilityZone

        RestoreDbInstanceFromDbSnapshotRequest.Builder availabilityZone​(String availabilityZone)

        The Availability Zone (AZ) where the DB instance will be created.

        Default: A random, system-chosen Availability Zone.

        Constraint: You can't specify the AvailabilityZone parameter if the DB instance is a Multi-AZ deployment.

        Example: us-east-1a

        Parameters:
        availabilityZone - The Availability Zone (AZ) where the DB instance will be created.

        Default: A random, system-chosen Availability Zone.

        Constraint: You can't specify the AvailabilityZone parameter if the DB instance is a Multi-AZ deployment.

        Example: us-east-1a

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • dbSubnetGroupName

        RestoreDbInstanceFromDbSnapshotRequest.Builder dbSubnetGroupName​(String dbSubnetGroupName)

        The name of the DB subnet group to use for the new instance.

        Constraints:

        • If supplied, must match the name of an existing DB subnet group.

        Example: mydbsubnetgroup

        Parameters:
        dbSubnetGroupName - The name of the DB subnet group to use for the new instance.

        Constraints:

        • If supplied, must match the name of an existing DB subnet group.

        Example: mydbsubnetgroup

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • multiAZ

        RestoreDbInstanceFromDbSnapshotRequest.Builder multiAZ​(Boolean multiAZ)

        Specifies whether the DB instance is a Multi-AZ deployment.

        This setting doesn't apply to RDS Custom.

        Constraint: You can't specify the AvailabilityZone parameter if the DB instance is a Multi-AZ deployment.

        Parameters:
        multiAZ - Specifies whether the DB instance is a Multi-AZ deployment.

        This setting doesn't apply to RDS Custom.

        Constraint: You can't specify the AvailabilityZone parameter if the DB instance is a Multi-AZ deployment.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • publiclyAccessible

        RestoreDbInstanceFromDbSnapshotRequest.Builder publiclyAccessible​(Boolean publiclyAccessible)

        Specifies whether the DB instance is publicly accessible.

        When the DB instance is publicly accessible, its Domain Name System (DNS) endpoint resolves to the private IP address from within the DB instance's virtual private cloud (VPC). It resolves to the public IP address from outside of the DB instance's VPC. Access to the DB instance is ultimately controlled by the security group it uses. That public access is not permitted if the security group assigned to the DB instance doesn't permit it.

        When the DB instance isn't publicly accessible, it is an internal DB instance with a DNS name that resolves to a private IP address.

        For more information, see CreateDBInstance.

        Parameters:
        publiclyAccessible - Specifies whether the DB instance is publicly accessible.

        When the DB instance is publicly accessible, its Domain Name System (DNS) endpoint resolves to the private IP address from within the DB instance's virtual private cloud (VPC). It resolves to the public IP address from outside of the DB instance's VPC. Access to the DB instance is ultimately controlled by the security group it uses. That public access is not permitted if the security group assigned to the DB instance doesn't permit it.

        When the DB instance isn't publicly accessible, it is an internal DB instance with a DNS name that resolves to a private IP address.

        For more information, see CreateDBInstance.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • autoMinorVersionUpgrade

        RestoreDbInstanceFromDbSnapshotRequest.Builder autoMinorVersionUpgrade​(Boolean autoMinorVersionUpgrade)

        Specifies whether to automatically apply minor version upgrades to the DB instance during the maintenance window.

        If you restore an RDS Custom DB instance, you must disable this parameter.

        Parameters:
        autoMinorVersionUpgrade - Specifies whether to automatically apply minor version upgrades to the DB instance during the maintenance window.

        If you restore an RDS Custom DB instance, you must disable this parameter.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • licenseModel

        RestoreDbInstanceFromDbSnapshotRequest.Builder licenseModel​(String licenseModel)

        License model information for the restored DB instance.

        License models for RDS for Db2 require additional configuration. The Bring Your Own License (BYOL) model requires a custom parameter group and an Amazon Web Services License Manager self-managed license. The Db2 license through Amazon Web Services Marketplace model requires an Amazon Web Services Marketplace subscription. For more information, see Amazon RDS for Db2 licensing options in the Amazon RDS User Guide.

        This setting doesn't apply to Amazon Aurora or RDS Custom DB instances.

        Valid Values:

        • RDS for Db2 - bring-your-own-license | marketplace-license

        • RDS for MariaDB - general-public-license

        • RDS for Microsoft SQL Server - license-included

        • RDS for MySQL - general-public-license

        • RDS for Oracle - bring-your-own-license | license-included

        • RDS for PostgreSQL - postgresql-license

        Default: Same as the source.

        Parameters:
        licenseModel - License model information for the restored DB instance.

        License models for RDS for Db2 require additional configuration. The Bring Your Own License (BYOL) model requires a custom parameter group and an Amazon Web Services License Manager self-managed license. The Db2 license through Amazon Web Services Marketplace model requires an Amazon Web Services Marketplace subscription. For more information, see Amazon RDS for Db2 licensing options in the Amazon RDS User Guide.

        This setting doesn't apply to Amazon Aurora or RDS Custom DB instances.

        Valid Values:

        • RDS for Db2 - bring-your-own-license | marketplace-license

        • RDS for MariaDB - general-public-license

        • RDS for Microsoft SQL Server - license-included

        • RDS for MySQL - general-public-license

        • RDS for Oracle - bring-your-own-license | license-included

        • RDS for PostgreSQL - postgresql-license

        Default: Same as the source.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • dbName

        RestoreDbInstanceFromDbSnapshotRequest.Builder dbName​(String dbName)

        The name of the database for the restored DB instance.

        This parameter only applies to RDS for Oracle and RDS for SQL Server DB instances. It doesn't apply to the other engines or to RDS Custom DB instances.

        Parameters:
        dbName - The name of the database for the restored DB instance.

        This parameter only applies to RDS for Oracle and RDS for SQL Server DB instances. It doesn't apply to the other engines or to RDS Custom DB instances.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • engine

        RestoreDbInstanceFromDbSnapshotRequest.Builder engine​(String engine)

        The database engine to use for the new instance.

        This setting doesn't apply to RDS Custom.

        Default: The same as source

        Constraint: Must be compatible with the engine of the source. For example, you can restore a MariaDB 10.1 DB instance from a MySQL 5.6 snapshot.

        Valid Values:

        • db2-ae

        • db2-se

        • mariadb

        • mysql

        • oracle-ee

        • oracle-ee-cdb

        • oracle-se2

        • oracle-se2-cdb

        • postgres

        • sqlserver-ee

        • sqlserver-se

        • sqlserver-ex

        • sqlserver-web

        Parameters:
        engine - The database engine to use for the new instance.

        This setting doesn't apply to RDS Custom.

        Default: The same as source

        Constraint: Must be compatible with the engine of the source. For example, you can restore a MariaDB 10.1 DB instance from a MySQL 5.6 snapshot.

        Valid Values:

        • db2-ae

        • db2-se

        • mariadb

        • mysql

        • oracle-ee

        • oracle-ee-cdb

        • oracle-se2

        • oracle-se2-cdb

        • postgres

        • sqlserver-ee

        • sqlserver-se

        • sqlserver-ex

        • sqlserver-web

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • iops

        RestoreDbInstanceFromDbSnapshotRequest.Builder iops​(Integer iops)

        Specifies the amount of provisioned IOPS for the DB instance, expressed in I/O operations per second. If this parameter isn't specified, the IOPS value is taken from the backup. If this parameter is set to 0, the new instance is converted to a non-PIOPS instance. The conversion takes additional time, though your DB instance is available for connections before the conversion starts.

        The provisioned IOPS value must follow the requirements for your database engine. For more information, see Amazon RDS Provisioned IOPS storage in the Amazon RDS User Guide.

        Constraints: Must be an integer greater than 1000.

        Parameters:
        iops - Specifies the amount of provisioned IOPS for the DB instance, expressed in I/O operations per second. If this parameter isn't specified, the IOPS value is taken from the backup. If this parameter is set to 0, the new instance is converted to a non-PIOPS instance. The conversion takes additional time, though your DB instance is available for connections before the conversion starts.

        The provisioned IOPS value must follow the requirements for your database engine. For more information, see Amazon RDS Provisioned IOPS storage in the Amazon RDS User Guide.

        Constraints: Must be an integer greater than 1000.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • optionGroupName

        RestoreDbInstanceFromDbSnapshotRequest.Builder optionGroupName​(String optionGroupName)

        The name of the option group to be used for the restored DB instance.

        Permanent options, such as the TDE option for Oracle Advanced Security TDE, can't be removed from an option group, and that option group can't be removed from a DB instance after it is associated with a DB instance.

        This setting doesn't apply to RDS Custom.

        Parameters:
        optionGroupName - The name of the option group to be used for the restored DB instance.

        Permanent options, such as the TDE option for Oracle Advanced Security TDE, can't be removed from an option group, and that option group can't be removed from a DB instance after it is associated with a DB instance.

        This setting doesn't apply to RDS Custom.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • tags

        RestoreDbInstanceFromDbSnapshotRequest.Builder tags​(Collection<Tag> tags)
        Sets the value of the Tags property for this object.
        Parameters:
        tags - The new value for the Tags property for this object.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • tags

        RestoreDbInstanceFromDbSnapshotRequest.Builder tags​(Tag... tags)
        Sets the value of the Tags property for this object.
        Parameters:
        tags - The new value for the Tags property for this object.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • storageType

        RestoreDbInstanceFromDbSnapshotRequest.Builder storageType​(String storageType)

        Specifies the storage type to be associated with the DB instance.

        Valid Values: gp2 | gp3 | io1 | io2 | standard

        If you specify io1, io2, or gp3, you must also include a value for the Iops parameter.

        Default: io1 if the Iops parameter is specified, otherwise gp3

        Parameters:
        storageType - Specifies the storage type to be associated with the DB instance.

        Valid Values: gp2 | gp3 | io1 | io2 | standard

        If you specify io1, io2, or gp3, you must also include a value for the Iops parameter.

        Default: io1 if the Iops parameter is specified, otherwise gp3

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • tdeCredentialArn

        RestoreDbInstanceFromDbSnapshotRequest.Builder tdeCredentialArn​(String tdeCredentialArn)

        The ARN from the key store with which to associate the instance for TDE encryption.

        This setting doesn't apply to RDS Custom.

        Parameters:
        tdeCredentialArn - The ARN from the key store with which to associate the instance for TDE encryption.

        This setting doesn't apply to RDS Custom.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • tdeCredentialPassword

        RestoreDbInstanceFromDbSnapshotRequest.Builder tdeCredentialPassword​(String tdeCredentialPassword)

        The password for the given ARN from the key store in order to access the device.

        This setting doesn't apply to RDS Custom.

        Parameters:
        tdeCredentialPassword - The password for the given ARN from the key store in order to access the device.

        This setting doesn't apply to RDS Custom.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • vpcSecurityGroupIds

        RestoreDbInstanceFromDbSnapshotRequest.Builder vpcSecurityGroupIds​(Collection<String> vpcSecurityGroupIds)

        A list of EC2 VPC security groups to associate with this DB instance.

        Default: The default EC2 VPC security group for the DB subnet group's VPC.

        Parameters:
        vpcSecurityGroupIds - A list of EC2 VPC security groups to associate with this DB instance.

        Default: The default EC2 VPC security group for the DB subnet group's VPC.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • vpcSecurityGroupIds

        RestoreDbInstanceFromDbSnapshotRequest.Builder vpcSecurityGroupIds​(String... vpcSecurityGroupIds)

        A list of EC2 VPC security groups to associate with this DB instance.

        Default: The default EC2 VPC security group for the DB subnet group's VPC.

        Parameters:
        vpcSecurityGroupIds - A list of EC2 VPC security groups to associate with this DB instance.

        Default: The default EC2 VPC security group for the DB subnet group's VPC.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • domain

        RestoreDbInstanceFromDbSnapshotRequest.Builder domain​(String domain)

        The Active Directory directory ID to restore the DB instance in. The domain/ must be created prior to this operation. Currently, you can create only Db2, MySQL, Microsoft SQL Server, Oracle, and PostgreSQL DB instances in an Active Directory Domain.

        For more information, see Kerberos Authentication in the Amazon RDS User Guide.

        This setting doesn't apply to RDS Custom.

        Parameters:
        domain - The Active Directory directory ID to restore the DB instance in. The domain/ must be created prior to this operation. Currently, you can create only Db2, MySQL, Microsoft SQL Server, Oracle, and PostgreSQL DB instances in an Active Directory Domain.

        For more information, see Kerberos Authentication in the Amazon RDS User Guide.

        This setting doesn't apply to RDS Custom.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • domainFqdn

        RestoreDbInstanceFromDbSnapshotRequest.Builder domainFqdn​(String domainFqdn)

        The fully qualified domain name (FQDN) of an Active Directory domain.

        Constraints:

        • Can't be longer than 64 characters.

        Example: mymanagedADtest.mymanagedAD.mydomain

        Parameters:
        domainFqdn - The fully qualified domain name (FQDN) of an Active Directory domain.

        Constraints:

        • Can't be longer than 64 characters.

        Example: mymanagedADtest.mymanagedAD.mydomain

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • domainOu

        RestoreDbInstanceFromDbSnapshotRequest.Builder domainOu​(String domainOu)

        The Active Directory organizational unit for your DB instance to join.

        Constraints:

        • Must be in the distinguished name format.

        • Can't be longer than 64 characters.

        Example: OU=mymanagedADtestOU,DC=mymanagedADtest,DC=mymanagedAD,DC=mydomain

        Parameters:
        domainOu - The Active Directory organizational unit for your DB instance to join.

        Constraints:

        • Must be in the distinguished name format.

        • Can't be longer than 64 characters.

        Example: OU=mymanagedADtestOU,DC=mymanagedADtest,DC=mymanagedAD,DC=mydomain

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • domainAuthSecretArn

        RestoreDbInstanceFromDbSnapshotRequest.Builder domainAuthSecretArn​(String domainAuthSecretArn)

        The ARN for the Secrets Manager secret with the credentials for the user joining the domain.

        Constraints:

        • Can't be longer than 64 characters.

        Example: arn:aws:secretsmanager:region:account-number:secret:myselfmanagedADtestsecret-123456

        Parameters:
        domainAuthSecretArn - The ARN for the Secrets Manager secret with the credentials for the user joining the domain.

        Constraints:

        • Can't be longer than 64 characters.

        Example: arn:aws:secretsmanager:region:account-number:secret:myselfmanagedADtestsecret-123456

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • domainDnsIps

        RestoreDbInstanceFromDbSnapshotRequest.Builder domainDnsIps​(Collection<String> domainDnsIps)

        The IPv4 DNS IP addresses of your primary and secondary Active Directory domain controllers.

        Constraints:

        • Two IP addresses must be provided. If there isn't a secondary domain controller, use the IP address of the primary domain controller for both entries in the list.

        Example: 123.124.125.126,234.235.236.237

        Parameters:
        domainDnsIps - The IPv4 DNS IP addresses of your primary and secondary Active Directory domain controllers.

        Constraints:

        • Two IP addresses must be provided. If there isn't a secondary domain controller, use the IP address of the primary domain controller for both entries in the list.

        Example: 123.124.125.126,234.235.236.237

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • domainDnsIps

        RestoreDbInstanceFromDbSnapshotRequest.Builder domainDnsIps​(String... domainDnsIps)

        The IPv4 DNS IP addresses of your primary and secondary Active Directory domain controllers.

        Constraints:

        • Two IP addresses must be provided. If there isn't a secondary domain controller, use the IP address of the primary domain controller for both entries in the list.

        Example: 123.124.125.126,234.235.236.237

        Parameters:
        domainDnsIps - The IPv4 DNS IP addresses of your primary and secondary Active Directory domain controllers.

        Constraints:

        • Two IP addresses must be provided. If there isn't a secondary domain controller, use the IP address of the primary domain controller for both entries in the list.

        Example: 123.124.125.126,234.235.236.237

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • copyTagsToSnapshot

        RestoreDbInstanceFromDbSnapshotRequest.Builder copyTagsToSnapshot​(Boolean copyTagsToSnapshot)

        Specifies whether to copy all tags from the restored DB instance to snapshots of the DB instance.

        In most cases, tags aren't copied by default. However, when you restore a DB instance from a DB snapshot, RDS checks whether you specify new tags. If yes, the new tags are added to the restored DB instance. If there are no new tags, RDS looks for the tags from the source DB instance for the DB snapshot, and then adds those tags to the restored DB instance.

        For more information, see Copying tags to DB instance snapshots in the Amazon RDS User Guide.

        Parameters:
        copyTagsToSnapshot - Specifies whether to copy all tags from the restored DB instance to snapshots of the DB instance.

        In most cases, tags aren't copied by default. However, when you restore a DB instance from a DB snapshot, RDS checks whether you specify new tags. If yes, the new tags are added to the restored DB instance. If there are no new tags, RDS looks for the tags from the source DB instance for the DB snapshot, and then adds those tags to the restored DB instance.

        For more information, see Copying tags to DB instance snapshots in the Amazon RDS User Guide.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • domainIAMRoleName

        RestoreDbInstanceFromDbSnapshotRequest.Builder domainIAMRoleName​(String domainIAMRoleName)

        The name of the IAM role to use when making API calls to the Directory Service.

        This setting doesn't apply to RDS Custom DB instances.

        Parameters:
        domainIAMRoleName - The name of the IAM role to use when making API calls to the Directory Service.

        This setting doesn't apply to RDS Custom DB instances.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • enableIAMDatabaseAuthentication

        RestoreDbInstanceFromDbSnapshotRequest.Builder enableIAMDatabaseAuthentication​(Boolean enableIAMDatabaseAuthentication)

        Specifies whether to enable mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts. By default, mapping is disabled.

        For more information about IAM database authentication, see IAM Database Authentication for MySQL and PostgreSQL in the Amazon RDS User Guide.

        This setting doesn't apply to RDS Custom.

        Parameters:
        enableIAMDatabaseAuthentication - Specifies whether to enable mapping of Amazon Web Services Identity and Access Management (IAM) accounts to database accounts. By default, mapping is disabled.

        For more information about IAM database authentication, see IAM Database Authentication for MySQL and PostgreSQL in the Amazon RDS User Guide.

        This setting doesn't apply to RDS Custom.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • enableCloudwatchLogsExports

        RestoreDbInstanceFromDbSnapshotRequest.Builder enableCloudwatchLogsExports​(Collection<String> enableCloudwatchLogsExports)

        The list of logs for the restored DB instance to export to CloudWatch Logs. The values in the list depend on the DB engine. For more information, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.

        This setting doesn't apply to RDS Custom.

        Parameters:
        enableCloudwatchLogsExports - The list of logs for the restored DB instance to export to CloudWatch Logs. The values in the list depend on the DB engine. For more information, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.

        This setting doesn't apply to RDS Custom.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • enableCloudwatchLogsExports

        RestoreDbInstanceFromDbSnapshotRequest.Builder enableCloudwatchLogsExports​(String... enableCloudwatchLogsExports)

        The list of logs for the restored DB instance to export to CloudWatch Logs. The values in the list depend on the DB engine. For more information, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.

        This setting doesn't apply to RDS Custom.

        Parameters:
        enableCloudwatchLogsExports - The list of logs for the restored DB instance to export to CloudWatch Logs. The values in the list depend on the DB engine. For more information, see Publishing Database Logs to Amazon CloudWatch Logs in the Amazon RDS User Guide.

        This setting doesn't apply to RDS Custom.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • processorFeatures

        RestoreDbInstanceFromDbSnapshotRequest.Builder processorFeatures​(Collection<ProcessorFeature> processorFeatures)

        The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.

        This setting doesn't apply to RDS Custom.

        Parameters:
        processorFeatures - The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.

        This setting doesn't apply to RDS Custom.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • processorFeatures

        RestoreDbInstanceFromDbSnapshotRequest.Builder processorFeatures​(ProcessorFeature... processorFeatures)

        The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.

        This setting doesn't apply to RDS Custom.

        Parameters:
        processorFeatures - The number of CPU cores and the number of threads per core for the DB instance class of the DB instance.

        This setting doesn't apply to RDS Custom.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • useDefaultProcessorFeatures

        RestoreDbInstanceFromDbSnapshotRequest.Builder useDefaultProcessorFeatures​(Boolean useDefaultProcessorFeatures)

        Specifies whether the DB instance class of the DB instance uses its default processor features.

        This setting doesn't apply to RDS Custom.

        Parameters:
        useDefaultProcessorFeatures - Specifies whether the DB instance class of the DB instance uses its default processor features.

        This setting doesn't apply to RDS Custom.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • dbParameterGroupName

        RestoreDbInstanceFromDbSnapshotRequest.Builder dbParameterGroupName​(String dbParameterGroupName)

        The name of the DB parameter group to associate with this DB instance.

        If you don't specify a value for DBParameterGroupName, then RDS uses the default DBParameterGroup for the specified DB engine.

        This setting doesn't apply to RDS Custom.

        Constraints:

        • If supplied, must match the name of an existing DB parameter group.

        • Must be 1 to 255 letters, numbers, or hyphens.

        • First character must be a letter.

        • Can't end with a hyphen or contain two consecutive hyphens.

        Parameters:
        dbParameterGroupName - The name of the DB parameter group to associate with this DB instance.

        If you don't specify a value for DBParameterGroupName, then RDS uses the default DBParameterGroup for the specified DB engine.

        This setting doesn't apply to RDS Custom.

        Constraints:

        • If supplied, must match the name of an existing DB parameter group.

        • Must be 1 to 255 letters, numbers, or hyphens.

        • First character must be a letter.

        • Can't end with a hyphen or contain two consecutive hyphens.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • deletionProtection

        RestoreDbInstanceFromDbSnapshotRequest.Builder deletionProtection​(Boolean deletionProtection)

        Specifies whether to enable deletion protection for the DB instance. The database can't be deleted when deletion protection is enabled. By default, deletion protection isn't enabled. For more information, see Deleting a DB Instance.

        Parameters:
        deletionProtection - Specifies whether to enable deletion protection for the DB instance. The database can't be deleted when deletion protection is enabled. By default, deletion protection isn't enabled. For more information, see Deleting a DB Instance.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • enableCustomerOwnedIp

        RestoreDbInstanceFromDbSnapshotRequest.Builder enableCustomerOwnedIp​(Boolean enableCustomerOwnedIp)

        Specifies whether to enable a customer-owned IP address (CoIP) for an RDS on Outposts DB instance.

        A CoIP provides local or external connectivity to resources in your Outpost subnets through your on-premises network. For some use cases, a CoIP can provide lower latency for connections to the DB instance from outside of its virtual private cloud (VPC) on your local network.

        This setting doesn't apply to RDS Custom.

        For more information about RDS on Outposts, see Working with Amazon RDS on Amazon Web Services Outposts in the Amazon RDS User Guide.

        For more information about CoIPs, see Customer-owned IP addresses in the Amazon Web Services Outposts User Guide.

        Parameters:
        enableCustomerOwnedIp - Specifies whether to enable a customer-owned IP address (CoIP) for an RDS on Outposts DB instance.

        A CoIP provides local or external connectivity to resources in your Outpost subnets through your on-premises network. For some use cases, a CoIP can provide lower latency for connections to the DB instance from outside of its virtual private cloud (VPC) on your local network.

        This setting doesn't apply to RDS Custom.

        For more information about RDS on Outposts, see Working with Amazon RDS on Amazon Web Services Outposts in the Amazon RDS User Guide.

        For more information about CoIPs, see Customer-owned IP addresses in the Amazon Web Services Outposts User Guide.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • customIamInstanceProfile

        RestoreDbInstanceFromDbSnapshotRequest.Builder customIamInstanceProfile​(String customIamInstanceProfile)

        The instance profile associated with the underlying Amazon EC2 instance of an RDS Custom DB instance. The instance profile must meet the following requirements:

        • The profile must exist in your account.

        • The profile must have an IAM role that Amazon EC2 has permissions to assume.

        • The instance profile name and the associated IAM role name must start with the prefix AWSRDSCustom.

        For the list of permissions required for the IAM role, see Configure IAM and your VPC in the Amazon RDS User Guide.

        This setting is required for RDS Custom.

        Parameters:
        customIamInstanceProfile - The instance profile associated with the underlying Amazon EC2 instance of an RDS Custom DB instance. The instance profile must meet the following requirements:

        • The profile must exist in your account.

        • The profile must have an IAM role that Amazon EC2 has permissions to assume.

        • The instance profile name and the associated IAM role name must start with the prefix AWSRDSCustom.

        For the list of permissions required for the IAM role, see Configure IAM and your VPC in the Amazon RDS User Guide.

        This setting is required for RDS Custom.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • backupTarget

        RestoreDbInstanceFromDbSnapshotRequest.Builder backupTarget​(String backupTarget)

        Specifies where automated backups and manual snapshots are stored for the restored DB instance.

        Possible values are outposts (Amazon Web Services Outposts) and region (Amazon Web Services Region). The default is region.

        For more information, see Working with Amazon RDS on Amazon Web Services Outposts in the Amazon RDS User Guide.

        Parameters:
        backupTarget - Specifies where automated backups and manual snapshots are stored for the restored DB instance.

        Possible values are outposts (Amazon Web Services Outposts) and region (Amazon Web Services Region). The default is region.

        For more information, see Working with Amazon RDS on Amazon Web Services Outposts in the Amazon RDS User Guide.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • networkType

        RestoreDbInstanceFromDbSnapshotRequest.Builder networkType​(String networkType)

        The network type of the DB instance.

        Valid Values:

        • IPV4

        • DUAL

        The network type is determined by the DBSubnetGroup specified for the DB instance. A DBSubnetGroup can support only the IPv4 protocol or the IPv4 and the IPv6 protocols ( DUAL).

        For more information, see Working with a DB instance in a VPC in the Amazon RDS User Guide.

        Parameters:
        networkType - The network type of the DB instance.

        Valid Values:

        • IPV4

        • DUAL

        The network type is determined by the DBSubnetGroup specified for the DB instance. A DBSubnetGroup can support only the IPv4 protocol or the IPv4 and the IPv6 protocols ( DUAL).

        For more information, see Working with a DB instance in a VPC in the Amazon RDS User Guide.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • storageThroughput

        RestoreDbInstanceFromDbSnapshotRequest.Builder storageThroughput​(Integer storageThroughput)

        Specifies the storage throughput value for the DB instance.

        This setting doesn't apply to RDS Custom or Amazon Aurora.

        Parameters:
        storageThroughput - Specifies the storage throughput value for the DB instance.

        This setting doesn't apply to RDS Custom or Amazon Aurora.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • dbClusterSnapshotIdentifier

        RestoreDbInstanceFromDbSnapshotRequest.Builder dbClusterSnapshotIdentifier​(String dbClusterSnapshotIdentifier)

        The identifier for the Multi-AZ DB cluster snapshot to restore from.

        For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide.

        Constraints:

        • Must match the identifier of an existing Multi-AZ DB cluster snapshot.

        • Can't be specified when DBSnapshotIdentifier is specified.

        • Must be specified when DBSnapshotIdentifier isn't specified.

        • If you are restoring from a shared manual Multi-AZ DB cluster snapshot, the DBClusterSnapshotIdentifier must be the ARN of the shared snapshot.

        • Can't be the identifier of an Aurora DB cluster snapshot.

        Parameters:
        dbClusterSnapshotIdentifier - The identifier for the Multi-AZ DB cluster snapshot to restore from.

        For more information on Multi-AZ DB clusters, see Multi-AZ DB cluster deployments in the Amazon RDS User Guide.

        Constraints:

        • Must match the identifier of an existing Multi-AZ DB cluster snapshot.

        • Can't be specified when DBSnapshotIdentifier is specified.

        • Must be specified when DBSnapshotIdentifier isn't specified.

        • If you are restoring from a shared manual Multi-AZ DB cluster snapshot, the DBClusterSnapshotIdentifier must be the ARN of the shared snapshot.

        • Can't be the identifier of an Aurora DB cluster snapshot.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • allocatedStorage

        RestoreDbInstanceFromDbSnapshotRequest.Builder allocatedStorage​(Integer allocatedStorage)

        The amount of storage (in gibibytes) to allocate initially for the DB instance. Follow the allocation rules specified in CreateDBInstance.

        This setting isn't valid for RDS for SQL Server.

        Be sure to allocate enough storage for your new DB instance so that the restore operation can succeed. You can also allocate additional storage for future growth.

        Parameters:
        allocatedStorage - The amount of storage (in gibibytes) to allocate initially for the DB instance. Follow the allocation rules specified in CreateDBInstance.

        This setting isn't valid for RDS for SQL Server.

        Be sure to allocate enough storage for your new DB instance so that the restore operation can succeed. You can also allocate additional storage for future growth.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • dedicatedLogVolume

        RestoreDbInstanceFromDbSnapshotRequest.Builder dedicatedLogVolume​(Boolean dedicatedLogVolume)

        Specifies whether to enable a dedicated log volume (DLV) for the DB instance.

        Parameters:
        dedicatedLogVolume - Specifies whether to enable a dedicated log volume (DLV) for the DB instance.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • engineLifecycleSupport

        RestoreDbInstanceFromDbSnapshotRequest.Builder engineLifecycleSupport​(String engineLifecycleSupport)

        The life cycle type for this DB instance.

        By default, this value is set to open-source-rds-extended-support, which enrolls your DB instance into Amazon RDS Extended Support. At the end of standard support, you can avoid charges for Extended Support by setting the value to open-source-rds-extended-support-disabled. In this case, RDS automatically upgrades your restored DB instance to a higher engine version, if the major engine version is past its end of standard support date.

        You can use this setting to enroll your DB instance into Amazon RDS Extended Support. With RDS Extended Support, you can run the selected major engine version on your DB instance past the end of standard support for that engine version. For more information, see Using Amazon RDS Extended Support in the Amazon RDS User Guide.

        This setting applies only to RDS for MySQL and RDS for PostgreSQL. For Amazon Aurora DB instances, the life cycle type is managed by the DB cluster.

        Valid Values: open-source-rds-extended-support | open-source-rds-extended-support-disabled

        Default: open-source-rds-extended-support

        Parameters:
        engineLifecycleSupport - The life cycle type for this DB instance.

        By default, this value is set to open-source-rds-extended-support, which enrolls your DB instance into Amazon RDS Extended Support. At the end of standard support, you can avoid charges for Extended Support by setting the value to open-source-rds-extended-support-disabled. In this case, RDS automatically upgrades your restored DB instance to a higher engine version, if the major engine version is past its end of standard support date.

        You can use this setting to enroll your DB instance into Amazon RDS Extended Support. With RDS Extended Support, you can run the selected major engine version on your DB instance past the end of standard support for that engine version. For more information, see Using Amazon RDS Extended Support in the Amazon RDS User Guide.

        This setting applies only to RDS for MySQL and RDS for PostgreSQL. For Amazon Aurora DB instances, the life cycle type is managed by the DB cluster.

        Valid Values: open-source-rds-extended-support | open-source-rds-extended-support-disabled

        Default: open-source-rds-extended-support

        Returns:
        Returns a reference to this object so that method calls can be chained together.