Package software.amazon.awssdk.services.s3.model

Interface ListMultipartUploadsRequest.Builder

    • Method Detail

      • bucket

        ListMultipartUploadsRequest.Builder bucket​(String bucket)

        The name of the bucket to which the multipart upload was initiated.

        Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3 (for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.

        Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

        Access points and Object Lambda access points are not supported by directory buckets.

        S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com . When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

        Parameters:
        bucket - The name of the bucket to which the multipart upload was initiated.

        Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format Bucket_name.s3express-az_id.region.amazonaws.com. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format bucket_base_name--az-id--x-s3 (for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.

        Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

        Access points and Object Lambda access points are not supported by directory buckets.

        S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com . When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • delimiter

        ListMultipartUploadsRequest.Builder delimiter​(String delimiter)

        Character you use to group keys.

        All keys that contain the same string between the prefix, if specified, and the first occurrence of the delimiter after the prefix are grouped under a single result element, CommonPrefixes. If you don't specify the prefix parameter, then the substring starts at the beginning of the key. The keys that are grouped under CommonPrefixes result element are not returned elsewhere in the response.

        Directory buckets - For directory buckets, / is the only supported delimiter.

        Parameters:
        delimiter - Character you use to group keys.

        All keys that contain the same string between the prefix, if specified, and the first occurrence of the delimiter after the prefix are grouped under a single result element, CommonPrefixes. If you don't specify the prefix parameter, then the substring starts at the beginning of the key. The keys that are grouped under CommonPrefixes result element are not returned elsewhere in the response.

        Directory buckets - For directory buckets, / is the only supported delimiter.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • encodingType

        ListMultipartUploadsRequest.Builder encodingType​(String encodingType)
        Sets the value of the EncodingType property for this object.
        Parameters:
        encodingType - The new value for the EncodingType property for this object.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        EncodingType, EncodingType

      • encodingType

        ListMultipartUploadsRequest.Builder encodingType​(EncodingType encodingType)
        Sets the value of the EncodingType property for this object.
        Parameters:
        encodingType - The new value for the EncodingType property for this object.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        EncodingType, EncodingType

      • keyMarker

        ListMultipartUploadsRequest.Builder keyMarker​(String keyMarker)

        Specifies the multipart upload after which listing should begin.

        • General purpose buckets - For general purpose buckets, key-marker is an object key. Together with upload-id-marker, this parameter specifies the multipart upload after which listing should begin.

          If upload-id-marker is not specified, only the keys lexicographically greater than the specified key-marker will be included in the list.

          If upload-id-marker is specified, any multipart uploads for a key equal to the key-marker might also be included, provided those multipart uploads have upload IDs lexicographically greater than the specified upload-id-marker.

        • Directory buckets - For directory buckets, key-marker is obfuscated and isn't a real object key. The upload-id-marker parameter isn't supported by directory buckets. To list the additional multipart uploads, you only need to set the value of key-marker to the NextKeyMarker value from the previous response.

          In the ListMultipartUploads response, the multipart uploads aren't sorted lexicographically based on the object keys.

        Parameters:
        keyMarker - Specifies the multipart upload after which listing should begin.

        • General purpose buckets - For general purpose buckets, key-marker is an object key. Together with upload-id-marker, this parameter specifies the multipart upload after which listing should begin.

          If upload-id-marker is not specified, only the keys lexicographically greater than the specified key-marker will be included in the list.

          If upload-id-marker is specified, any multipart uploads for a key equal to the key-marker might also be included, provided those multipart uploads have upload IDs lexicographically greater than the specified upload-id-marker.

        • Directory buckets - For directory buckets, key-marker is obfuscated and isn't a real object key. The upload-id-marker parameter isn't supported by directory buckets. To list the additional multipart uploads, you only need to set the value of key-marker to the NextKeyMarker value from the previous response.

          In the ListMultipartUploads response, the multipart uploads aren't sorted lexicographically based on the object keys.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • maxUploads

        ListMultipartUploadsRequest.Builder maxUploads​(Integer maxUploads)

        Sets the maximum number of multipart uploads, from 1 to 1,000, to return in the response body. 1,000 is the maximum number of uploads that can be returned in a response.

        Parameters:
        maxUploads - Sets the maximum number of multipart uploads, from 1 to 1,000, to return in the response body. 1,000 is the maximum number of uploads that can be returned in a response.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • prefix

        ListMultipartUploadsRequest.Builder prefix​(String prefix)

        Lists in-progress uploads only for those keys that begin with the specified prefix. You can use prefixes to separate a bucket into different grouping of keys. (You can think of using prefix to make groups in the same way that you'd use a folder in a file system.)

        Directory buckets - For directory buckets, only prefixes that end in a delimiter (/) are supported.

        Parameters:
        prefix - Lists in-progress uploads only for those keys that begin with the specified prefix. You can use prefixes to separate a bucket into different grouping of keys. (You can think of using prefix to make groups in the same way that you'd use a folder in a file system.)

        Directory buckets - For directory buckets, only prefixes that end in a delimiter ( /) are supported.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • uploadIdMarker

        ListMultipartUploadsRequest.Builder uploadIdMarker​(String uploadIdMarker)

        Together with key-marker, specifies the multipart upload after which listing should begin. If key-marker is not specified, the upload-id-marker parameter is ignored. Otherwise, any multipart uploads for a key equal to the key-marker might be included in the list only if they have an upload ID lexicographically greater than the specified upload-id-marker.

        This functionality is not supported for directory buckets.

        Parameters:
        uploadIdMarker - Together with key-marker, specifies the multipart upload after which listing should begin. If key-marker is not specified, the upload-id-marker parameter is ignored. Otherwise, any multipart uploads for a key equal to the key-marker might be included in the list only if they have an upload ID lexicographically greater than the specified upload-id-marker.

        This functionality is not supported for directory buckets.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • expectedBucketOwner

        ListMultipartUploadsRequest.Builder expectedBucketOwner​(String expectedBucketOwner)

        The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

        Parameters:
        expectedBucketOwner - The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • requestPayer

        ListMultipartUploadsRequest.Builder requestPayer​(String requestPayer)
        Sets the value of the RequestPayer property for this object.
        Parameters:
        requestPayer - The new value for the RequestPayer property for this object.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        RequestPayer, RequestPayer

      • requestPayer

        ListMultipartUploadsRequest.Builder requestPayer​(RequestPayer requestPayer)
        Sets the value of the RequestPayer property for this object.
        Parameters:
        requestPayer - The new value for the RequestPayer property for this object.
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        RequestPayer, RequestPayer