public static interface GetQueueAttributesRequest.Builder extends SqsRequest.Builder, SdkPojo, CopyableBuilder<GetQueueAttributesRequest.Builder,GetQueueAttributesRequest>
buildoverrideConfigurationequalsBySdkFields, sdkFieldscopyapplyMutation, buildGetQueueAttributesRequest.Builder queueUrl(String queueUrl)
The URL of the Amazon SQS queue whose attribute information is retrieved.
Queue URLs and names are case-sensitive.
queueUrl - The URL of the Amazon SQS queue whose attribute information is retrieved.
Queue URLs and names are case-sensitive.
GetQueueAttributesRequest.Builder attributeNamesWithStrings(Collection<String> attributeNames)
A list of attributes for which to retrieve information.
In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
The following attributes are supported:
The ApproximateNumberOfMessagesDelayed, ApproximateNumberOfMessagesNotVisible, and
ApproximateNumberOfMessagesVisible metrics may not achieve consistency until at least 1 minute
after the producers stop sending messages. This period is required for the queue metadata to reach eventual
consistency.
All – Returns all values.
ApproximateNumberOfMessages – Returns the approximate number of messages available for retrieval
from the queue.
ApproximateNumberOfMessagesDelayed – Returns the approximate number of messages in the queue
that are delayed and not available for reading immediately. This can happen when the queue is configured as a
delay queue or when a message has been sent with a delay parameter.
ApproximateNumberOfMessagesNotVisible – Returns the approximate number of messages that are in
flight. Messages are considered to be in flight if they have been sent to a client but have not yet
been deleted or have not yet reached the end of their visibility window.
CreatedTimestamp – Returns the time when the queue was created in seconds (epoch time).
DelaySeconds – Returns the default delay on the queue in seconds.
LastModifiedTimestamp – Returns the time when the queue was last changed in seconds (epoch time).
MaximumMessageSize – Returns the limit of how many bytes a message can contain before Amazon SQS
rejects it.
MessageRetentionPeriod – Returns the length of time, in seconds, for which Amazon SQS retains a
message.
Policy – Returns the policy of the queue.
QueueArn – Returns the Amazon resource name (ARN) of the queue.
ReceiveMessageWaitTimeSeconds – Returns the length of time, in seconds, for which the
ReceiveMessage action waits for a message to arrive.
RedrivePolicy – The string that includes the parameters for the dead-letter queue functionality
of the source queue as a JSON object. For more information about the redrive policy and dead-letter queues,
see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.
deadLetterTargetArn – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon
SQS moves messages after the value of maxReceiveCount is exceeded.
maxReceiveCount – The number of times a message is delivered to the source queue before being
moved to the dead-letter queue. When the ReceiveCount for a message exceeds the
maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue.
VisibilityTimeout – Returns the visibility timeout for the queue. For more information about the
visibility timeout, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
The following attributes apply only to server-side-encryption:
KmsMasterKeyId – Returns the ID of an AWS-managed customer master key (CMK) for Amazon SQS or a
custom CMK. For more information, see Key Terms.
KmsDataKeyReusePeriodSeconds – Returns the length of time, in seconds, for which Amazon SQS can
reuse a data key to encrypt or decrypt messages before calling AWS KMS again. For more information, see How Does the Data Key Reuse Period Work?.
The following attributes apply only to FIFO (first-in-first-out) queues:
FifoQueue – Returns information about whether the queue is FIFO. For more information, see FIFO Queue Logic in the Amazon Simple Queue Service Developer Guide.
To determine whether a queue is FIFO,
you can check whether QueueName ends with the .fifo suffix.
ContentBasedDeduplication – Returns whether content-based deduplication is enabled for the
queue. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.
Preview: High throughput for FIFO queues
High throughput for Amazon SQS FIFO queues is in preview release and is subject to change. This feature provides a high number of transactions per second (TPS) for messages in FIFO queues. For information on throughput quotas, see Quotas related to messages in the Amazon Simple Queue Service Developer Guide.
This preview includes two new attributes:
DeduplicationScope – Specifies whether message deduplication occurs at the message group or
queue level. Valid values are messageGroup and queue.
FifoThroughputLimit – Specifies whether the FIFO queue throughput quota applies to the entire
queue or per message group. Valid values are perQueue and perMessageGroupId. The
perMessageGroupId value is allowed only when the value for DeduplicationScope is
messageGroup.
To enable high throughput for FIFO queues, do the following:
Set DeduplicationScope to messageGroup.
Set FifoThroughputLimit to perMessageGroupId.
If you set these attributes to anything other than the values shown for enabling high throughput, standard throughput is in effect and deduplication occurs as specified.
This preview is available in the following AWS Regions:
US East (Ohio); us-east-2
US East (N. Virginia); us-east-1
US West (Oregon); us-west-2
Europe (Ireland); eu-west-1
For more information about high throughput for FIFO queues, see Preview: High throughput for FIFO queues in the Amazon Simple Queue Service Developer Guide.
attributeNames - A list of attributes for which to retrieve information. In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
The following attributes are supported:
The ApproximateNumberOfMessagesDelayed,
ApproximateNumberOfMessagesNotVisible, and
ApproximateNumberOfMessagesVisible metrics may not achieve consistency until at least 1
minute after the producers stop sending messages. This period is required for the queue metadata to
reach eventual consistency.
All – Returns all values.
ApproximateNumberOfMessages – Returns the approximate number of messages available for
retrieval from the queue.
ApproximateNumberOfMessagesDelayed – Returns the approximate number of messages in the
queue that are delayed and not available for reading immediately. This can happen when the queue is
configured as a delay queue or when a message has been sent with a delay parameter.
ApproximateNumberOfMessagesNotVisible – Returns the approximate number of messages that
are in flight. Messages are considered to be in flight if they have been sent to a client but
have not yet been deleted or have not yet reached the end of their visibility window.
CreatedTimestamp – Returns the time when the queue was created in seconds (epoch time).
DelaySeconds – Returns the default delay on the queue in seconds.
LastModifiedTimestamp – Returns the time when the queue was last changed in seconds (epoch time).
MaximumMessageSize – Returns the limit of how many bytes a message can contain before
Amazon SQS rejects it.
MessageRetentionPeriod – Returns the length of time, in seconds, for which Amazon SQS
retains a message.
Policy – Returns the policy of the queue.
QueueArn – Returns the Amazon resource name (ARN) of the queue.
ReceiveMessageWaitTimeSeconds – Returns the length of time, in seconds, for which the
ReceiveMessage action waits for a message to arrive.
RedrivePolicy – The string that includes the parameters for the dead-letter queue
functionality of the source queue as a JSON object. For more information about the redrive policy and
dead-letter queues, see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.
deadLetterTargetArn – The Amazon Resource Name (ARN) of the dead-letter queue to which
Amazon SQS moves messages after the value of maxReceiveCount is exceeded.
maxReceiveCount – The number of times a message is delivered to the source queue before
being moved to the dead-letter queue. When the ReceiveCount for a message exceeds the
maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue.
VisibilityTimeout – Returns the visibility timeout for the queue. For more information
about the visibility timeout, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
The following attributes apply only to server-side-encryption:
KmsMasterKeyId – Returns the ID of an AWS-managed customer master key (CMK) for Amazon
SQS or a custom CMK. For more information, see Key Terms.
KmsDataKeyReusePeriodSeconds – Returns the length of time, in seconds, for which Amazon
SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. For more
information, see How Does the Data Key Reuse Period Work?.
The following attributes apply only to FIFO (first-in-first-out) queues:
FifoQueue – Returns information about whether the queue is FIFO. For more information,
see FIFO Queue Logic in the Amazon Simple Queue Service Developer Guide.
To determine whether a queue is FIFO, you can check whether QueueName ends with the .fifo suffix.
ContentBasedDeduplication – Returns whether content-based deduplication is enabled for
the queue. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.
Preview: High throughput for FIFO queues
High throughput for Amazon SQS FIFO queues is in preview release and is subject to change. This feature provides a high number of transactions per second (TPS) for messages in FIFO queues. For information on throughput quotas, see Quotas related to messages in the Amazon Simple Queue Service Developer Guide.
This preview includes two new attributes:
DeduplicationScope – Specifies whether message deduplication occurs at the message group
or queue level. Valid values are messageGroup and queue.
FifoThroughputLimit – Specifies whether the FIFO queue throughput quota applies to the
entire queue or per message group. Valid values are perQueue and
perMessageGroupId. The perMessageGroupId value is allowed only when the
value for DeduplicationScope is messageGroup.
To enable high throughput for FIFO queues, do the following:
Set DeduplicationScope to messageGroup.
Set FifoThroughputLimit to perMessageGroupId.
If you set these attributes to anything other than the values shown for enabling high throughput, standard throughput is in effect and deduplication occurs as specified.
This preview is available in the following AWS Regions:
US East (Ohio); us-east-2
US East (N. Virginia); us-east-1
US West (Oregon); us-west-2
Europe (Ireland); eu-west-1
For more information about high throughput for FIFO queues, see Preview: High throughput for FIFO queues in the Amazon Simple Queue Service Developer Guide.
GetQueueAttributesRequest.Builder attributeNamesWithStrings(String... attributeNames)
A list of attributes for which to retrieve information.
In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
The following attributes are supported:
The ApproximateNumberOfMessagesDelayed, ApproximateNumberOfMessagesNotVisible, and
ApproximateNumberOfMessagesVisible metrics may not achieve consistency until at least 1 minute
after the producers stop sending messages. This period is required for the queue metadata to reach eventual
consistency.
All – Returns all values.
ApproximateNumberOfMessages – Returns the approximate number of messages available for retrieval
from the queue.
ApproximateNumberOfMessagesDelayed – Returns the approximate number of messages in the queue
that are delayed and not available for reading immediately. This can happen when the queue is configured as a
delay queue or when a message has been sent with a delay parameter.
ApproximateNumberOfMessagesNotVisible – Returns the approximate number of messages that are in
flight. Messages are considered to be in flight if they have been sent to a client but have not yet
been deleted or have not yet reached the end of their visibility window.
CreatedTimestamp – Returns the time when the queue was created in seconds (epoch time).
DelaySeconds – Returns the default delay on the queue in seconds.
LastModifiedTimestamp – Returns the time when the queue was last changed in seconds (epoch time).
MaximumMessageSize – Returns the limit of how many bytes a message can contain before Amazon SQS
rejects it.
MessageRetentionPeriod – Returns the length of time, in seconds, for which Amazon SQS retains a
message.
Policy – Returns the policy of the queue.
QueueArn – Returns the Amazon resource name (ARN) of the queue.
ReceiveMessageWaitTimeSeconds – Returns the length of time, in seconds, for which the
ReceiveMessage action waits for a message to arrive.
RedrivePolicy – The string that includes the parameters for the dead-letter queue functionality
of the source queue as a JSON object. For more information about the redrive policy and dead-letter queues,
see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.
deadLetterTargetArn – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon
SQS moves messages after the value of maxReceiveCount is exceeded.
maxReceiveCount – The number of times a message is delivered to the source queue before being
moved to the dead-letter queue. When the ReceiveCount for a message exceeds the
maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue.
VisibilityTimeout – Returns the visibility timeout for the queue. For more information about the
visibility timeout, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
The following attributes apply only to server-side-encryption:
KmsMasterKeyId – Returns the ID of an AWS-managed customer master key (CMK) for Amazon SQS or a
custom CMK. For more information, see Key Terms.
KmsDataKeyReusePeriodSeconds – Returns the length of time, in seconds, for which Amazon SQS can
reuse a data key to encrypt or decrypt messages before calling AWS KMS again. For more information, see How Does the Data Key Reuse Period Work?.
The following attributes apply only to FIFO (first-in-first-out) queues:
FifoQueue – Returns information about whether the queue is FIFO. For more information, see FIFO Queue Logic in the Amazon Simple Queue Service Developer Guide.
To determine whether a queue is FIFO,
you can check whether QueueName ends with the .fifo suffix.
ContentBasedDeduplication – Returns whether content-based deduplication is enabled for the
queue. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.
Preview: High throughput for FIFO queues
High throughput for Amazon SQS FIFO queues is in preview release and is subject to change. This feature provides a high number of transactions per second (TPS) for messages in FIFO queues. For information on throughput quotas, see Quotas related to messages in the Amazon Simple Queue Service Developer Guide.
This preview includes two new attributes:
DeduplicationScope – Specifies whether message deduplication occurs at the message group or
queue level. Valid values are messageGroup and queue.
FifoThroughputLimit – Specifies whether the FIFO queue throughput quota applies to the entire
queue or per message group. Valid values are perQueue and perMessageGroupId. The
perMessageGroupId value is allowed only when the value for DeduplicationScope is
messageGroup.
To enable high throughput for FIFO queues, do the following:
Set DeduplicationScope to messageGroup.
Set FifoThroughputLimit to perMessageGroupId.
If you set these attributes to anything other than the values shown for enabling high throughput, standard throughput is in effect and deduplication occurs as specified.
This preview is available in the following AWS Regions:
US East (Ohio); us-east-2
US East (N. Virginia); us-east-1
US West (Oregon); us-west-2
Europe (Ireland); eu-west-1
For more information about high throughput for FIFO queues, see Preview: High throughput for FIFO queues in the Amazon Simple Queue Service Developer Guide.
attributeNames - A list of attributes for which to retrieve information. In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
The following attributes are supported:
The ApproximateNumberOfMessagesDelayed,
ApproximateNumberOfMessagesNotVisible, and
ApproximateNumberOfMessagesVisible metrics may not achieve consistency until at least 1
minute after the producers stop sending messages. This period is required for the queue metadata to
reach eventual consistency.
All – Returns all values.
ApproximateNumberOfMessages – Returns the approximate number of messages available for
retrieval from the queue.
ApproximateNumberOfMessagesDelayed – Returns the approximate number of messages in the
queue that are delayed and not available for reading immediately. This can happen when the queue is
configured as a delay queue or when a message has been sent with a delay parameter.
ApproximateNumberOfMessagesNotVisible – Returns the approximate number of messages that
are in flight. Messages are considered to be in flight if they have been sent to a client but
have not yet been deleted or have not yet reached the end of their visibility window.
CreatedTimestamp – Returns the time when the queue was created in seconds (epoch time).
DelaySeconds – Returns the default delay on the queue in seconds.
LastModifiedTimestamp – Returns the time when the queue was last changed in seconds (epoch time).
MaximumMessageSize – Returns the limit of how many bytes a message can contain before
Amazon SQS rejects it.
MessageRetentionPeriod – Returns the length of time, in seconds, for which Amazon SQS
retains a message.
Policy – Returns the policy of the queue.
QueueArn – Returns the Amazon resource name (ARN) of the queue.
ReceiveMessageWaitTimeSeconds – Returns the length of time, in seconds, for which the
ReceiveMessage action waits for a message to arrive.
RedrivePolicy – The string that includes the parameters for the dead-letter queue
functionality of the source queue as a JSON object. For more information about the redrive policy and
dead-letter queues, see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.
deadLetterTargetArn – The Amazon Resource Name (ARN) of the dead-letter queue to which
Amazon SQS moves messages after the value of maxReceiveCount is exceeded.
maxReceiveCount – The number of times a message is delivered to the source queue before
being moved to the dead-letter queue. When the ReceiveCount for a message exceeds the
maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue.
VisibilityTimeout – Returns the visibility timeout for the queue. For more information
about the visibility timeout, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
The following attributes apply only to server-side-encryption:
KmsMasterKeyId – Returns the ID of an AWS-managed customer master key (CMK) for Amazon
SQS or a custom CMK. For more information, see Key Terms.
KmsDataKeyReusePeriodSeconds – Returns the length of time, in seconds, for which Amazon
SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. For more
information, see How Does the Data Key Reuse Period Work?.
The following attributes apply only to FIFO (first-in-first-out) queues:
FifoQueue – Returns information about whether the queue is FIFO. For more information,
see FIFO Queue Logic in the Amazon Simple Queue Service Developer Guide.
To determine whether a queue is FIFO, you can check whether QueueName ends with the .fifo suffix.
ContentBasedDeduplication – Returns whether content-based deduplication is enabled for
the queue. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.
Preview: High throughput for FIFO queues
High throughput for Amazon SQS FIFO queues is in preview release and is subject to change. This feature provides a high number of transactions per second (TPS) for messages in FIFO queues. For information on throughput quotas, see Quotas related to messages in the Amazon Simple Queue Service Developer Guide.
This preview includes two new attributes:
DeduplicationScope – Specifies whether message deduplication occurs at the message group
or queue level. Valid values are messageGroup and queue.
FifoThroughputLimit – Specifies whether the FIFO queue throughput quota applies to the
entire queue or per message group. Valid values are perQueue and
perMessageGroupId. The perMessageGroupId value is allowed only when the
value for DeduplicationScope is messageGroup.
To enable high throughput for FIFO queues, do the following:
Set DeduplicationScope to messageGroup.
Set FifoThroughputLimit to perMessageGroupId.
If you set these attributes to anything other than the values shown for enabling high throughput, standard throughput is in effect and deduplication occurs as specified.
This preview is available in the following AWS Regions:
US East (Ohio); us-east-2
US East (N. Virginia); us-east-1
US West (Oregon); us-west-2
Europe (Ireland); eu-west-1
For more information about high throughput for FIFO queues, see Preview: High throughput for FIFO queues in the Amazon Simple Queue Service Developer Guide.
GetQueueAttributesRequest.Builder attributeNames(Collection<QueueAttributeName> attributeNames)
A list of attributes for which to retrieve information.
In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
The following attributes are supported:
The ApproximateNumberOfMessagesDelayed, ApproximateNumberOfMessagesNotVisible, and
ApproximateNumberOfMessagesVisible metrics may not achieve consistency until at least 1 minute
after the producers stop sending messages. This period is required for the queue metadata to reach eventual
consistency.
All – Returns all values.
ApproximateNumberOfMessages – Returns the approximate number of messages available for retrieval
from the queue.
ApproximateNumberOfMessagesDelayed – Returns the approximate number of messages in the queue
that are delayed and not available for reading immediately. This can happen when the queue is configured as a
delay queue or when a message has been sent with a delay parameter.
ApproximateNumberOfMessagesNotVisible – Returns the approximate number of messages that are in
flight. Messages are considered to be in flight if they have been sent to a client but have not yet
been deleted or have not yet reached the end of their visibility window.
CreatedTimestamp – Returns the time when the queue was created in seconds (epoch time).
DelaySeconds – Returns the default delay on the queue in seconds.
LastModifiedTimestamp – Returns the time when the queue was last changed in seconds (epoch time).
MaximumMessageSize – Returns the limit of how many bytes a message can contain before Amazon SQS
rejects it.
MessageRetentionPeriod – Returns the length of time, in seconds, for which Amazon SQS retains a
message.
Policy – Returns the policy of the queue.
QueueArn – Returns the Amazon resource name (ARN) of the queue.
ReceiveMessageWaitTimeSeconds – Returns the length of time, in seconds, for which the
ReceiveMessage action waits for a message to arrive.
RedrivePolicy – The string that includes the parameters for the dead-letter queue functionality
of the source queue as a JSON object. For more information about the redrive policy and dead-letter queues,
see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.
deadLetterTargetArn – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon
SQS moves messages after the value of maxReceiveCount is exceeded.
maxReceiveCount – The number of times a message is delivered to the source queue before being
moved to the dead-letter queue. When the ReceiveCount for a message exceeds the
maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue.
VisibilityTimeout – Returns the visibility timeout for the queue. For more information about the
visibility timeout, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
The following attributes apply only to server-side-encryption:
KmsMasterKeyId – Returns the ID of an AWS-managed customer master key (CMK) for Amazon SQS or a
custom CMK. For more information, see Key Terms.
KmsDataKeyReusePeriodSeconds – Returns the length of time, in seconds, for which Amazon SQS can
reuse a data key to encrypt or decrypt messages before calling AWS KMS again. For more information, see How Does the Data Key Reuse Period Work?.
The following attributes apply only to FIFO (first-in-first-out) queues:
FifoQueue – Returns information about whether the queue is FIFO. For more information, see FIFO Queue Logic in the Amazon Simple Queue Service Developer Guide.
To determine whether a queue is FIFO,
you can check whether QueueName ends with the .fifo suffix.
ContentBasedDeduplication – Returns whether content-based deduplication is enabled for the
queue. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.
Preview: High throughput for FIFO queues
High throughput for Amazon SQS FIFO queues is in preview release and is subject to change. This feature provides a high number of transactions per second (TPS) for messages in FIFO queues. For information on throughput quotas, see Quotas related to messages in the Amazon Simple Queue Service Developer Guide.
This preview includes two new attributes:
DeduplicationScope – Specifies whether message deduplication occurs at the message group or
queue level. Valid values are messageGroup and queue.
FifoThroughputLimit – Specifies whether the FIFO queue throughput quota applies to the entire
queue or per message group. Valid values are perQueue and perMessageGroupId. The
perMessageGroupId value is allowed only when the value for DeduplicationScope is
messageGroup.
To enable high throughput for FIFO queues, do the following:
Set DeduplicationScope to messageGroup.
Set FifoThroughputLimit to perMessageGroupId.
If you set these attributes to anything other than the values shown for enabling high throughput, standard throughput is in effect and deduplication occurs as specified.
This preview is available in the following AWS Regions:
US East (Ohio); us-east-2
US East (N. Virginia); us-east-1
US West (Oregon); us-west-2
Europe (Ireland); eu-west-1
For more information about high throughput for FIFO queues, see Preview: High throughput for FIFO queues in the Amazon Simple Queue Service Developer Guide.
attributeNames - A list of attributes for which to retrieve information. In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
The following attributes are supported:
The ApproximateNumberOfMessagesDelayed,
ApproximateNumberOfMessagesNotVisible, and
ApproximateNumberOfMessagesVisible metrics may not achieve consistency until at least 1
minute after the producers stop sending messages. This period is required for the queue metadata to
reach eventual consistency.
All – Returns all values.
ApproximateNumberOfMessages – Returns the approximate number of messages available for
retrieval from the queue.
ApproximateNumberOfMessagesDelayed – Returns the approximate number of messages in the
queue that are delayed and not available for reading immediately. This can happen when the queue is
configured as a delay queue or when a message has been sent with a delay parameter.
ApproximateNumberOfMessagesNotVisible – Returns the approximate number of messages that
are in flight. Messages are considered to be in flight if they have been sent to a client but
have not yet been deleted or have not yet reached the end of their visibility window.
CreatedTimestamp – Returns the time when the queue was created in seconds (epoch time).
DelaySeconds – Returns the default delay on the queue in seconds.
LastModifiedTimestamp – Returns the time when the queue was last changed in seconds (epoch time).
MaximumMessageSize – Returns the limit of how many bytes a message can contain before
Amazon SQS rejects it.
MessageRetentionPeriod – Returns the length of time, in seconds, for which Amazon SQS
retains a message.
Policy – Returns the policy of the queue.
QueueArn – Returns the Amazon resource name (ARN) of the queue.
ReceiveMessageWaitTimeSeconds – Returns the length of time, in seconds, for which the
ReceiveMessage action waits for a message to arrive.
RedrivePolicy – The string that includes the parameters for the dead-letter queue
functionality of the source queue as a JSON object. For more information about the redrive policy and
dead-letter queues, see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.
deadLetterTargetArn – The Amazon Resource Name (ARN) of the dead-letter queue to which
Amazon SQS moves messages after the value of maxReceiveCount is exceeded.
maxReceiveCount – The number of times a message is delivered to the source queue before
being moved to the dead-letter queue. When the ReceiveCount for a message exceeds the
maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue.
VisibilityTimeout – Returns the visibility timeout for the queue. For more information
about the visibility timeout, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
The following attributes apply only to server-side-encryption:
KmsMasterKeyId – Returns the ID of an AWS-managed customer master key (CMK) for Amazon
SQS or a custom CMK. For more information, see Key Terms.
KmsDataKeyReusePeriodSeconds – Returns the length of time, in seconds, for which Amazon
SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. For more
information, see How Does the Data Key Reuse Period Work?.
The following attributes apply only to FIFO (first-in-first-out) queues:
FifoQueue – Returns information about whether the queue is FIFO. For more information,
see FIFO Queue Logic in the Amazon Simple Queue Service Developer Guide.
To determine whether a queue is FIFO, you can check whether QueueName ends with the .fifo suffix.
ContentBasedDeduplication – Returns whether content-based deduplication is enabled for
the queue. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.
Preview: High throughput for FIFO queues
High throughput for Amazon SQS FIFO queues is in preview release and is subject to change. This feature provides a high number of transactions per second (TPS) for messages in FIFO queues. For information on throughput quotas, see Quotas related to messages in the Amazon Simple Queue Service Developer Guide.
This preview includes two new attributes:
DeduplicationScope – Specifies whether message deduplication occurs at the message group
or queue level. Valid values are messageGroup and queue.
FifoThroughputLimit – Specifies whether the FIFO queue throughput quota applies to the
entire queue or per message group. Valid values are perQueue and
perMessageGroupId. The perMessageGroupId value is allowed only when the
value for DeduplicationScope is messageGroup.
To enable high throughput for FIFO queues, do the following:
Set DeduplicationScope to messageGroup.
Set FifoThroughputLimit to perMessageGroupId.
If you set these attributes to anything other than the values shown for enabling high throughput, standard throughput is in effect and deduplication occurs as specified.
This preview is available in the following AWS Regions:
US East (Ohio); us-east-2
US East (N. Virginia); us-east-1
US West (Oregon); us-west-2
Europe (Ireland); eu-west-1
For more information about high throughput for FIFO queues, see Preview: High throughput for FIFO queues in the Amazon Simple Queue Service Developer Guide.
GetQueueAttributesRequest.Builder attributeNames(QueueAttributeName... attributeNames)
A list of attributes for which to retrieve information.
In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
The following attributes are supported:
The ApproximateNumberOfMessagesDelayed, ApproximateNumberOfMessagesNotVisible, and
ApproximateNumberOfMessagesVisible metrics may not achieve consistency until at least 1 minute
after the producers stop sending messages. This period is required for the queue metadata to reach eventual
consistency.
All – Returns all values.
ApproximateNumberOfMessages – Returns the approximate number of messages available for retrieval
from the queue.
ApproximateNumberOfMessagesDelayed – Returns the approximate number of messages in the queue
that are delayed and not available for reading immediately. This can happen when the queue is configured as a
delay queue or when a message has been sent with a delay parameter.
ApproximateNumberOfMessagesNotVisible – Returns the approximate number of messages that are in
flight. Messages are considered to be in flight if they have been sent to a client but have not yet
been deleted or have not yet reached the end of their visibility window.
CreatedTimestamp – Returns the time when the queue was created in seconds (epoch time).
DelaySeconds – Returns the default delay on the queue in seconds.
LastModifiedTimestamp – Returns the time when the queue was last changed in seconds (epoch time).
MaximumMessageSize – Returns the limit of how many bytes a message can contain before Amazon SQS
rejects it.
MessageRetentionPeriod – Returns the length of time, in seconds, for which Amazon SQS retains a
message.
Policy – Returns the policy of the queue.
QueueArn – Returns the Amazon resource name (ARN) of the queue.
ReceiveMessageWaitTimeSeconds – Returns the length of time, in seconds, for which the
ReceiveMessage action waits for a message to arrive.
RedrivePolicy – The string that includes the parameters for the dead-letter queue functionality
of the source queue as a JSON object. For more information about the redrive policy and dead-letter queues,
see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.
deadLetterTargetArn – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon
SQS moves messages after the value of maxReceiveCount is exceeded.
maxReceiveCount – The number of times a message is delivered to the source queue before being
moved to the dead-letter queue. When the ReceiveCount for a message exceeds the
maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue.
VisibilityTimeout – Returns the visibility timeout for the queue. For more information about the
visibility timeout, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
The following attributes apply only to server-side-encryption:
KmsMasterKeyId – Returns the ID of an AWS-managed customer master key (CMK) for Amazon SQS or a
custom CMK. For more information, see Key Terms.
KmsDataKeyReusePeriodSeconds – Returns the length of time, in seconds, for which Amazon SQS can
reuse a data key to encrypt or decrypt messages before calling AWS KMS again. For more information, see How Does the Data Key Reuse Period Work?.
The following attributes apply only to FIFO (first-in-first-out) queues:
FifoQueue – Returns information about whether the queue is FIFO. For more information, see FIFO Queue Logic in the Amazon Simple Queue Service Developer Guide.
To determine whether a queue is FIFO,
you can check whether QueueName ends with the .fifo suffix.
ContentBasedDeduplication – Returns whether content-based deduplication is enabled for the
queue. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.
Preview: High throughput for FIFO queues
High throughput for Amazon SQS FIFO queues is in preview release and is subject to change. This feature provides a high number of transactions per second (TPS) for messages in FIFO queues. For information on throughput quotas, see Quotas related to messages in the Amazon Simple Queue Service Developer Guide.
This preview includes two new attributes:
DeduplicationScope – Specifies whether message deduplication occurs at the message group or
queue level. Valid values are messageGroup and queue.
FifoThroughputLimit – Specifies whether the FIFO queue throughput quota applies to the entire
queue or per message group. Valid values are perQueue and perMessageGroupId. The
perMessageGroupId value is allowed only when the value for DeduplicationScope is
messageGroup.
To enable high throughput for FIFO queues, do the following:
Set DeduplicationScope to messageGroup.
Set FifoThroughputLimit to perMessageGroupId.
If you set these attributes to anything other than the values shown for enabling high throughput, standard throughput is in effect and deduplication occurs as specified.
This preview is available in the following AWS Regions:
US East (Ohio); us-east-2
US East (N. Virginia); us-east-1
US West (Oregon); us-west-2
Europe (Ireland); eu-west-1
For more information about high throughput for FIFO queues, see Preview: High throughput for FIFO queues in the Amazon Simple Queue Service Developer Guide.
attributeNames - A list of attributes for which to retrieve information. In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.
The following attributes are supported:
The ApproximateNumberOfMessagesDelayed,
ApproximateNumberOfMessagesNotVisible, and
ApproximateNumberOfMessagesVisible metrics may not achieve consistency until at least 1
minute after the producers stop sending messages. This period is required for the queue metadata to
reach eventual consistency.
All – Returns all values.
ApproximateNumberOfMessages – Returns the approximate number of messages available for
retrieval from the queue.
ApproximateNumberOfMessagesDelayed – Returns the approximate number of messages in the
queue that are delayed and not available for reading immediately. This can happen when the queue is
configured as a delay queue or when a message has been sent with a delay parameter.
ApproximateNumberOfMessagesNotVisible – Returns the approximate number of messages that
are in flight. Messages are considered to be in flight if they have been sent to a client but
have not yet been deleted or have not yet reached the end of their visibility window.
CreatedTimestamp – Returns the time when the queue was created in seconds (epoch time).
DelaySeconds – Returns the default delay on the queue in seconds.
LastModifiedTimestamp – Returns the time when the queue was last changed in seconds (epoch time).
MaximumMessageSize – Returns the limit of how many bytes a message can contain before
Amazon SQS rejects it.
MessageRetentionPeriod – Returns the length of time, in seconds, for which Amazon SQS
retains a message.
Policy – Returns the policy of the queue.
QueueArn – Returns the Amazon resource name (ARN) of the queue.
ReceiveMessageWaitTimeSeconds – Returns the length of time, in seconds, for which the
ReceiveMessage action waits for a message to arrive.
RedrivePolicy – The string that includes the parameters for the dead-letter queue
functionality of the source queue as a JSON object. For more information about the redrive policy and
dead-letter queues, see Using Amazon SQS Dead-Letter Queues in the Amazon Simple Queue Service Developer Guide.
deadLetterTargetArn – The Amazon Resource Name (ARN) of the dead-letter queue to which
Amazon SQS moves messages after the value of maxReceiveCount is exceeded.
maxReceiveCount – The number of times a message is delivered to the source queue before
being moved to the dead-letter queue. When the ReceiveCount for a message exceeds the
maxReceiveCount for a queue, Amazon SQS moves the message to the dead-letter-queue.
VisibilityTimeout – Returns the visibility timeout for the queue. For more information
about the visibility timeout, see Visibility Timeout in the Amazon Simple Queue Service Developer Guide.
The following attributes apply only to server-side-encryption:
KmsMasterKeyId – Returns the ID of an AWS-managed customer master key (CMK) for Amazon
SQS or a custom CMK. For more information, see Key Terms.
KmsDataKeyReusePeriodSeconds – Returns the length of time, in seconds, for which Amazon
SQS can reuse a data key to encrypt or decrypt messages before calling AWS KMS again. For more
information, see How Does the Data Key Reuse Period Work?.
The following attributes apply only to FIFO (first-in-first-out) queues:
FifoQueue – Returns information about whether the queue is FIFO. For more information,
see FIFO Queue Logic in the Amazon Simple Queue Service Developer Guide.
To determine whether a queue is FIFO, you can check whether QueueName ends with the .fifo suffix.
ContentBasedDeduplication – Returns whether content-based deduplication is enabled for
the queue. For more information, see Exactly-Once Processing in the Amazon Simple Queue Service Developer Guide.
Preview: High throughput for FIFO queues
High throughput for Amazon SQS FIFO queues is in preview release and is subject to change. This feature provides a high number of transactions per second (TPS) for messages in FIFO queues. For information on throughput quotas, see Quotas related to messages in the Amazon Simple Queue Service Developer Guide.
This preview includes two new attributes:
DeduplicationScope – Specifies whether message deduplication occurs at the message group
or queue level. Valid values are messageGroup and queue.
FifoThroughputLimit – Specifies whether the FIFO queue throughput quota applies to the
entire queue or per message group. Valid values are perQueue and
perMessageGroupId. The perMessageGroupId value is allowed only when the
value for DeduplicationScope is messageGroup.
To enable high throughput for FIFO queues, do the following:
Set DeduplicationScope to messageGroup.
Set FifoThroughputLimit to perMessageGroupId.
If you set these attributes to anything other than the values shown for enabling high throughput, standard throughput is in effect and deduplication occurs as specified.
This preview is available in the following AWS Regions:
US East (Ohio); us-east-2
US East (N. Virginia); us-east-1
US West (Oregon); us-west-2
Europe (Ireland); eu-west-1
For more information about high throughput for FIFO queues, see Preview: High throughput for FIFO queues in the Amazon Simple Queue Service Developer Guide.
GetQueueAttributesRequest.Builder overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)
overrideConfiguration in interface AwsRequest.BuilderGetQueueAttributesRequest.Builder overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer)
overrideConfiguration in interface AwsRequest.BuilderCopyright © 2021. All rights reserved.