Package software.amazon.awssdk.services.sts.model

Interface GetFederationTokenRequest.Builder

    • Method Detail

      • name

        GetFederationTokenRequest.Builder name​(String name)

        The name of the federated user. The name is used as an identifier for the temporary security credentials (such as Bob). For example, you can reference the federated user name in a resource-based policy, such as in an Amazon S3 bucket policy.

        The regex used to validate this parameter is a string of characters consisting of upper- and lower-case alphanumeric characters with no spaces. You can also include underscores or any of the following characters: =,.@-

        Parameters:
        name - The name of the federated user. The name is used as an identifier for the temporary security credentials (such as Bob). For example, you can reference the federated user name in a resource-based policy, such as in an Amazon S3 bucket policy.

        The regex used to validate this parameter is a string of characters consisting of upper- and lower-case alphanumeric characters with no spaces. You can also include underscores or any of the following characters: =,.@-

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • policy

        GetFederationTokenRequest.Builder policy​(String policy)

        An IAM policy in JSON format that you want to use as an inline session policy.

        You must pass an inline or managed session policy to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policy Amazon Resource Names (ARNs) to use as managed session policies.

        This parameter is optional. However, if you do not pass any session policies, then the resulting federated user session has no permissions.

        When you pass session policies, the session permissions are the intersection of the IAM user policies and the session policies that you pass. This gives you a way to further restrict the permissions for a federated user. You cannot use session policies to grant more permissions than those that are defined in the permissions policy of the IAM user. For more information, see Session Policies in the IAM User Guide.

        The resulting credentials can be used to access a resource that has a resource-based policy. If that policy specifically references the federated user session in the Principal element of the policy, the session has the permissions allowed by the policy. These permissions are granted in addition to the permissions that are granted by the session policies.

        The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. The JSON policy characters can be any ASCII character from the space character to the end of the valid character list ( through ÿ). It can also include the tab ( ), linefeed ( ), and carriage return ( ) characters.

        An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

        Parameters:
        policy - An IAM policy in JSON format that you want to use as an inline session policy.

        You must pass an inline or managed session policy to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policy Amazon Resource Names (ARNs) to use as managed session policies.

        This parameter is optional. However, if you do not pass any session policies, then the resulting federated user session has no permissions.

        When you pass session policies, the session permissions are the intersection of the IAM user policies and the session policies that you pass. This gives you a way to further restrict the permissions for a federated user. You cannot use session policies to grant more permissions than those that are defined in the permissions policy of the IAM user. For more information, see Session Policies in the IAM User Guide.

        The resulting credentials can be used to access a resource that has a resource-based policy. If that policy specifically references the federated user session in the Principal element of the policy, the session has the permissions allowed by the policy. These permissions are granted in addition to the permissions that are granted by the session policies.

        The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. The JSON policy characters can be any ASCII character from the space character to the end of the valid character list ( through ÿ). It can also include the tab ( ), linefeed ( ), and carriage return ( ) characters.

        An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • policyArns

        GetFederationTokenRequest.Builder policyArns​(Collection<PolicyDescriptorType> policyArns)

        The Amazon Resource Names (ARNs) of the IAM managed policies that you want to use as a managed session policy. The policies must exist in the same account as the IAM user that is requesting federated access.

        You must pass an inline or managed session policy to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policy Amazon Resource Names (ARNs) to use as managed session policies. The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. You can provide up to 10 managed policy ARNs. For more information about ARNs, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces in the Amazon Web Services General Reference.

        This parameter is optional. However, if you do not pass any session policies, then the resulting federated user session has no permissions.

        When you pass session policies, the session permissions are the intersection of the IAM user policies and the session policies that you pass. This gives you a way to further restrict the permissions for a federated user. You cannot use session policies to grant more permissions than those that are defined in the permissions policy of the IAM user. For more information, see Session Policies in the IAM User Guide.

        The resulting credentials can be used to access a resource that has a resource-based policy. If that policy specifically references the federated user session in the Principal element of the policy, the session has the permissions allowed by the policy. These permissions are granted in addition to the permissions that are granted by the session policies.

        An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

        Parameters:
        policyArns - The Amazon Resource Names (ARNs) of the IAM managed policies that you want to use as a managed session policy. The policies must exist in the same account as the IAM user that is requesting federated access.

        You must pass an inline or managed session policy to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policy Amazon Resource Names (ARNs) to use as managed session policies. The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. You can provide up to 10 managed policy ARNs. For more information about ARNs, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces in the Amazon Web Services General Reference.

        This parameter is optional. However, if you do not pass any session policies, then the resulting federated user session has no permissions.

        When you pass session policies, the session permissions are the intersection of the IAM user policies and the session policies that you pass. This gives you a way to further restrict the permissions for a federated user. You cannot use session policies to grant more permissions than those that are defined in the permissions policy of the IAM user. For more information, see Session Policies in the IAM User Guide.

        The resulting credentials can be used to access a resource that has a resource-based policy. If that policy specifically references the federated user session in the Principal element of the policy, the session has the permissions allowed by the policy. These permissions are granted in addition to the permissions that are granted by the session policies.

        An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • policyArns

        GetFederationTokenRequest.Builder policyArns​(PolicyDescriptorType... policyArns)

        The Amazon Resource Names (ARNs) of the IAM managed policies that you want to use as a managed session policy. The policies must exist in the same account as the IAM user that is requesting federated access.

        You must pass an inline or managed session policy to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policy Amazon Resource Names (ARNs) to use as managed session policies. The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. You can provide up to 10 managed policy ARNs. For more information about ARNs, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces in the Amazon Web Services General Reference.

        This parameter is optional. However, if you do not pass any session policies, then the resulting federated user session has no permissions.

        When you pass session policies, the session permissions are the intersection of the IAM user policies and the session policies that you pass. This gives you a way to further restrict the permissions for a federated user. You cannot use session policies to grant more permissions than those that are defined in the permissions policy of the IAM user. For more information, see Session Policies in the IAM User Guide.

        The resulting credentials can be used to access a resource that has a resource-based policy. If that policy specifically references the federated user session in the Principal element of the policy, the session has the permissions allowed by the policy. These permissions are granted in addition to the permissions that are granted by the session policies.

        An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

        Parameters:
        policyArns - The Amazon Resource Names (ARNs) of the IAM managed policies that you want to use as a managed session policy. The policies must exist in the same account as the IAM user that is requesting federated access.

        You must pass an inline or managed session policy to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policy Amazon Resource Names (ARNs) to use as managed session policies. The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. You can provide up to 10 managed policy ARNs. For more information about ARNs, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces in the Amazon Web Services General Reference.

        This parameter is optional. However, if you do not pass any session policies, then the resulting federated user session has no permissions.

        When you pass session policies, the session permissions are the intersection of the IAM user policies and the session policies that you pass. This gives you a way to further restrict the permissions for a federated user. You cannot use session policies to grant more permissions than those that are defined in the permissions policy of the IAM user. For more information, see Session Policies in the IAM User Guide.

        The resulting credentials can be used to access a resource that has a resource-based policy. If that policy specifically references the federated user session in the Principal element of the policy, the session has the permissions allowed by the policy. These permissions are granted in addition to the permissions that are granted by the session policies.

        An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • policyArns

        GetFederationTokenRequest.Builder policyArns​(Consumer<PolicyDescriptorType.Builder>... policyArns)

        The Amazon Resource Names (ARNs) of the IAM managed policies that you want to use as a managed session policy. The policies must exist in the same account as the IAM user that is requesting federated access.

        You must pass an inline or managed session policy to this operation. You can pass a single JSON policy document to use as an inline session policy. You can also specify up to 10 managed policy Amazon Resource Names (ARNs) to use as managed session policies. The plaintext that you use for both inline and managed session policies can't exceed 2,048 characters. You can provide up to 10 managed policy ARNs. For more information about ARNs, see Amazon Resource Names (ARNs) and Amazon Web Services Service Namespaces in the Amazon Web Services General Reference.

        This parameter is optional. However, if you do not pass any session policies, then the resulting federated user session has no permissions.

        When you pass session policies, the session permissions are the intersection of the IAM user policies and the session policies that you pass. This gives you a way to further restrict the permissions for a federated user. You cannot use session policies to grant more permissions than those that are defined in the permissions policy of the IAM user. For more information, see Session Policies in the IAM User Guide.

        The resulting credentials can be used to access a resource that has a resource-based policy. If that policy specifically references the federated user session in the Principal element of the policy, the session has the permissions allowed by the policy. These permissions are granted in addition to the permissions that are granted by the session policies.

        An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

        This is a convenience method that creates an instance of the PolicyDescriptorType.Builder avoiding the need to create one manually via PolicyDescriptorType.builder().

        When the Consumer completes, SdkBuilder.build() is called immediately and its result is passed to #policyArns(List).

        Parameters:
        policyArns - a consumer that will call methods on PolicyDescriptorType.Builder
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        #policyArns(java.util.Collection)

      • durationSeconds

        GetFederationTokenRequest.Builder durationSeconds​(Integer durationSeconds)

        The duration, in seconds, that the session should last. Acceptable durations for federation sessions range from 900 seconds (15 minutes) to 129,600 seconds (36 hours), with 43,200 seconds (12 hours) as the default. Sessions obtained using root user credentials are restricted to a maximum of 3,600 seconds (one hour). If the specified duration is longer than one hour, the session obtained by using root user credentials defaults to one hour.

        Parameters:
        durationSeconds - The duration, in seconds, that the session should last. Acceptable durations for federation sessions range from 900 seconds (15 minutes) to 129,600 seconds (36 hours), with 43,200 seconds (12 hours) as the default. Sessions obtained using root user credentials are restricted to a maximum of 3,600 seconds (one hour). If the specified duration is longer than one hour, the session obtained by using root user credentials defaults to one hour.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • tags

        GetFederationTokenRequest.Builder tags​(Collection<Tag> tags)

        A list of session tags. Each session tag consists of a key name and an associated value. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide.

        This parameter is optional. You can pass up to 50 session tags. The plaintext session tag keys can’t exceed 128 characters and the values can’t exceed 256 characters. For these and additional limits, see IAM and STS Character Limits in the IAM User Guide.

        An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

        You can pass a session tag with the same key as a tag that is already attached to the user you are federating. When you do, session tags override a user tag with the same key.

        Tag key–value pairs are not case sensitive, but case is preserved. This means that you cannot have separate Department and department tag keys. Assume that the role has the Department=Marketing tag and you pass the department= engineering session tag. Department and department are not saved as separate tags, and the session tag passed in the request takes precedence over the role tag.

        Parameters:
        tags - A list of session tags. Each session tag consists of a key name and an associated value. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide.

        This parameter is optional. You can pass up to 50 session tags. The plaintext session tag keys can’t exceed 128 characters and the values can’t exceed 256 characters. For these and additional limits, see IAM and STS Character Limits in the IAM User Guide.

        An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

        You can pass a session tag with the same key as a tag that is already attached to the user you are federating. When you do, session tags override a user tag with the same key.

        Tag key–value pairs are not case sensitive, but case is preserved. This means that you cannot have separate Department and department tag keys. Assume that the role has the Department=Marketing tag and you pass the department= engineering session tag. Department and department are not saved as separate tags, and the session tag passed in the request takes precedence over the role tag.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • tags

        GetFederationTokenRequest.Builder tags​(Tag... tags)

        A list of session tags. Each session tag consists of a key name and an associated value. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide.

        This parameter is optional. You can pass up to 50 session tags. The plaintext session tag keys can’t exceed 128 characters and the values can’t exceed 256 characters. For these and additional limits, see IAM and STS Character Limits in the IAM User Guide.

        An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

        You can pass a session tag with the same key as a tag that is already attached to the user you are federating. When you do, session tags override a user tag with the same key.

        Tag key–value pairs are not case sensitive, but case is preserved. This means that you cannot have separate Department and department tag keys. Assume that the role has the Department=Marketing tag and you pass the department= engineering session tag. Department and department are not saved as separate tags, and the session tag passed in the request takes precedence over the role tag.

        Parameters:
        tags - A list of session tags. Each session tag consists of a key name and an associated value. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide.

        This parameter is optional. You can pass up to 50 session tags. The plaintext session tag keys can’t exceed 128 characters and the values can’t exceed 256 characters. For these and additional limits, see IAM and STS Character Limits in the IAM User Guide.

        An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

        You can pass a session tag with the same key as a tag that is already attached to the user you are federating. When you do, session tags override a user tag with the same key.

        Tag key–value pairs are not case sensitive, but case is preserved. This means that you cannot have separate Department and department tag keys. Assume that the role has the Department=Marketing tag and you pass the department= engineering session tag. Department and department are not saved as separate tags, and the session tag passed in the request takes precedence over the role tag.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • tags

        GetFederationTokenRequest.Builder tags​(Consumer<Tag.Builder>... tags)

        A list of session tags. Each session tag consists of a key name and an associated value. For more information about session tags, see Passing Session Tags in STS in the IAM User Guide.

        This parameter is optional. You can pass up to 50 session tags. The plaintext session tag keys can’t exceed 128 characters and the values can’t exceed 256 characters. For these and additional limits, see IAM and STS Character Limits in the IAM User Guide.

        An Amazon Web Services conversion compresses the passed inline session policy, managed policy ARNs, and session tags into a packed binary format that has a separate limit. Your request can fail for this limit even if your plaintext meets the other requirements. The PackedPolicySize response element indicates by percentage how close the policies and tags for your request are to the upper size limit.

        You can pass a session tag with the same key as a tag that is already attached to the user you are federating. When you do, session tags override a user tag with the same key.

        Tag key–value pairs are not case sensitive, but case is preserved. This means that you cannot have separate Department and department tag keys. Assume that the role has the Department=Marketing tag and you pass the department= engineering session tag. Department and department are not saved as separate tags, and the session tag passed in the request takes precedence over the role tag.

        This is a convenience method that creates an instance of the Tag.Builder avoiding the need to create one manually via Tag.builder().

        When the Consumer completes, SdkBuilder.build() is called immediately and its result is passed to #tags(List).

        Parameters:
        tags - a consumer that will call methods on Tag.Builder
        Returns:
        Returns a reference to this object so that method calls can be chained together.
        See Also:
        #tags(java.util.Collection)