abstract class Integer extends AnyRef
This class defines a uniform interface for defining parsers for integer literals, independent of how whitespace should be handled after the literal or whether the literal should allow for negative numbers.
- Source
- Integer.scala
- Since
4.0.0
- Note
implementations of this class found within
Lexer
may employ sharing and refine the non-finaldef
s in this class intoval
orlazy val
when overriding.
- Alphabetic
- By Inheritance
- Integer
- AnyRef
- Any
- Hide All
- Show All
- Public
- Protected
Abstract Value Members
- abstract def binary: Parsley[BigInt]
This parser will parse a single integer literal, which is in binary form (base 2).
This parser will parse a single integer literal, which is in binary form (base 2).
// using signed integers and standard numeric prefixes scala> binary.parse("0b1011") val res0 = Success(BigInt(11)) scala> binary.parse("10") val res2 = Failure(..) // no binary prefix scala> binary.parse("0b22") val res3 = Failure(..) // no other digits
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
Example: - abstract def bounded[T](number: Parsley[BigInt], bits: Bits, radix: Int, label: (ErrorConfig, Boolean) => LabelWithExplainConfig)(implicit ev: CanHold[self, T]): Parsley[T]
- Attributes
- protected[numeric]
- abstract def decimal: Parsley[BigInt]
This parser will parse a single integer literal, which is in decimal form (base 10).
This parser will parse a single integer literal, which is in decimal form (base 10).
// using signed integers and standard numeric prefixes scala> decimal.parse("103") val res0 = Success(BigInt(103)) scala> decimal.parse("9999999999999999999999999999999999") val res1 = Success(BigInt(9999999999999999999999999999999999)) scala> decimal.parse("1f") val res2 = Failure(..) // no hexadecimal digits supported scala> decimal.parse("0xff") val res3 = Failure(..) // no hexadecimal literals either
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
Example: - abstract def hexadecimal: Parsley[BigInt]
This parser will parse a single integer literal, which is in hexadecimal form (base 16).
This parser will parse a single integer literal, which is in hexadecimal form (base 16).
// using signed integers and standard numeric prefixes scala> hexadecimal.parse("0x103") val res0 = Success(BigInt(259)) scala> hexadecimal.parse("0x9999999999999999999999999999999999") val res1 = Success(BigInt(0x9999999999999999999999999999999999)) scala> hexadecimal.parse("1f") val res2 = Failure(..) // no hexadecimal prefix scala> hexadecimal.parse("0xff") val res3 = Success(BigInt(0xff))
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
Example: - abstract def number: Parsley[BigInt]
This parser will parse a single integer literal, which can be in many forms and bases depending on the configuration.
This parser will parse a single integer literal, which can be in many forms and bases depending on the configuration.
// using signed integers and standard numeric prefixes (and octal, binary, and decimal on) scala> number.parse("0b1011") val res0 = Success(BigInt(11)) scala> number.parse("0o103") val res1 = Success(BigInt(43)) scala> number.parse("10") val res2 = Success(10) scala> number.parse("0xff") val res1 = Failure(..) // configuration specified above does not support hex
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
Example: - abstract def octal: Parsley[BigInt]
This parser will parse a single integer literal, which is in octal form (base 8).
This parser will parse a single integer literal, which is in octal form (base 8).
// using signed integers and standard numeric prefixes scala> octal.parse("0o103") val res0 = Success(BigInt(43)) scala> octal.parse("1f") val res2 = Failure(..) // no hexadecimal digits supported scala> octal.parse("0xff") val res3 = Failure(..) // no hexadecimal literals either
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
Example:
Concrete Value Members
- final def !=(arg0: Any): Boolean
- Definition Classes
- AnyRef → Any
- final def ##: Int
- Definition Classes
- AnyRef → Any
- final def ==(arg0: Any): Boolean
- Definition Classes
- AnyRef → Any
- def _binary: Parsley[BigInt]
- Attributes
- protected[numeric]
- def _decimal: Parsley[BigInt]
- Attributes
- protected[numeric]
- def _hexadecimal: Parsley[BigInt]
- Attributes
- protected[numeric]
- def _number: Parsley[BigInt]
- Attributes
- protected[numeric]
- def _octal: Parsley[BigInt]
- Attributes
- protected[numeric]
- final def asInstanceOf[T0]: T0
- Definition Classes
- Any
- final def binary16[T](implicit arg0: can_hold_16_bits[T]): Parsley[T]
This parser will behave the same as
binary
except it will ensure that the resultingBigInt
is a valid 16-bit number.This parser will behave the same as
binary
except it will ensure that the resultingBigInt
is a valid 16-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Short
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def binary32[T](implicit arg0: can_hold_32_bits[T]): Parsley[T]
This parser will behave the same as
binary
except it will ensure that the resultingBigInt
is a valid 32-bit number.This parser will behave the same as
binary
except it will ensure that the resultingBigInt
is a valid 32-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Int
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def binary64[T](implicit arg0: can_hold_64_bits[T]): Parsley[T]
This parser will behave the same as
binary
except it will ensure that the resultingBigInt
is a valid 64-bit number.This parser will behave the same as
binary
except it will ensure that the resultingBigInt
is a valid 64-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Long
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def binary8[T](implicit arg0: can_hold_8_bits[T]): Parsley[T]
This parser will behave the same as
binary
except it will ensure that the resultingBigInt
is a valid 8-bit number.This parser will behave the same as
binary
except it will ensure that the resultingBigInt
is a valid 8-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Byte
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- def clone(): AnyRef
- Attributes
- protected[lang]
- Definition Classes
- AnyRef
- Annotations
- @throws(classOf[java.lang.CloneNotSupportedException]) @native()
- final def decimal16[T](implicit arg0: can_hold_16_bits[T]): Parsley[T]
This parser will behave the same as
decimal
except it will ensure that the resultingBigInt
is a valid 16-bit number.This parser will behave the same as
decimal
except it will ensure that the resultingBigInt
is a valid 16-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Short
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def decimal32[T](implicit arg0: can_hold_32_bits[T]): Parsley[T]
This parser will behave the same as
decimal
except it will ensure that the resultingBigInt
is a valid 32-bit number.This parser will behave the same as
decimal
except it will ensure that the resultingBigInt
is a valid 32-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Int
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def decimal64[T](implicit arg0: can_hold_64_bits[T]): Parsley[T]
This parser will behave the same as
decimal
except it will ensure that the resultingBigInt
is a valid 64-bit number.This parser will behave the same as
decimal
except it will ensure that the resultingBigInt
is a valid 64-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Long
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def decimal8[T](implicit arg0: can_hold_8_bits[T]): Parsley[T]
This parser will behave the same as
decimal
except it will ensure that the resultingBigInt
is a valid 8-bit number.This parser will behave the same as
decimal
except it will ensure that the resultingBigInt
is a valid 8-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Byte
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def eq(arg0: AnyRef): Boolean
- Definition Classes
- AnyRef
- def equals(arg0: AnyRef): Boolean
- Definition Classes
- AnyRef → Any
- def finalize(): Unit
- Attributes
- protected[lang]
- Definition Classes
- AnyRef
- Annotations
- @throws(classOf[java.lang.Throwable])
- final def getClass(): Class[_ <: AnyRef]
- Definition Classes
- AnyRef → Any
- Annotations
- @native()
- def hashCode(): Int
- Definition Classes
- AnyRef → Any
- Annotations
- @native()
- final def hexadecimal16[T](implicit arg0: can_hold_16_bits[T]): Parsley[T]
This parser will behave the same as
hexadecimal
except it will ensure that the resultingBigInt
is a valid 16-bit number.This parser will behave the same as
hexadecimal
except it will ensure that the resultingBigInt
is a valid 16-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Short
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def hexadecimal32[T](implicit arg0: can_hold_32_bits[T]): Parsley[T]
This parser will behave the same as
hexadecimal
except it will ensure that the resultingBigInt
is a valid 32-bit number.This parser will behave the same as
hexadecimal
except it will ensure that the resultingBigInt
is a valid 32-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Int
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def hexadecimal64[T](implicit arg0: can_hold_64_bits[T]): Parsley[T]
This parser will behave the same as
hexadecimal
except it will ensure that the resultingBigInt
is a valid 64-bit number.This parser will behave the same as
hexadecimal
except it will ensure that the resultingBigInt
is a valid 64-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Long
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def hexadecimal8[T](implicit arg0: can_hold_8_bits[T]): Parsley[T]
This parser will behave the same as
hexadecimal
except it will ensure that the resultingBigInt
is a valid 8-bit number.This parser will behave the same as
hexadecimal
except it will ensure that the resultingBigInt
is a valid 8-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Byte
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def isInstanceOf[T0]: Boolean
- Definition Classes
- Any
- final def ne(arg0: AnyRef): Boolean
- Definition Classes
- AnyRef
- final def notify(): Unit
- Definition Classes
- AnyRef
- Annotations
- @native()
- final def notifyAll(): Unit
- Definition Classes
- AnyRef
- Annotations
- @native()
- final def number16[T](implicit arg0: can_hold_16_bits[T]): Parsley[T]
This parser will behave the same as
number
except it will ensure that the resultingBigInt
is a valid 16-bit number.This parser will behave the same as
number
except it will ensure that the resultingBigInt
is a valid 16-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Short
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def number32[T](implicit arg0: can_hold_32_bits[T]): Parsley[T]
This parser will behave the same as
number
except it will ensure that the resultingBigInt
is a valid 32-bit number.This parser will behave the same as
number
except it will ensure that the resultingBigInt
is a valid 32-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Int
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def number64[T](implicit arg0: can_hold_64_bits[T]): Parsley[T]
This parser will behave the same as
number
except it will ensure that the resultingBigInt
is a valid 64-bit number.This parser will behave the same as
number
except it will ensure that the resultingBigInt
is a valid 64-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Long
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def number8[T](implicit arg0: can_hold_8_bits[T]): Parsley[T]
This parser will behave the same as
number
except it will ensure that the resultingBigInt
is a valid 8-bit number.This parser will behave the same as
number
except it will ensure that the resultingBigInt
is a valid 8-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Byte
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def octal16[T](implicit arg0: can_hold_16_bits[T]): Parsley[T]
This parser will behave the same as
octal
except it will ensure that the resultingBigInt
is a valid 16-bit number.This parser will behave the same as
octal
except it will ensure that the resultingBigInt
is a valid 16-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Short
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def octal32[T](implicit arg0: can_hold_32_bits[T]): Parsley[T]
This parser will behave the same as
octal
except it will ensure that the resultingBigInt
is a valid 32-bit number.This parser will behave the same as
octal
except it will ensure that the resultingBigInt
is a valid 32-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Int
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def octal64[T](implicit arg0: can_hold_64_bits[T]): Parsley[T]
This parser will behave the same as
octal
except it will ensure that the resultingBigInt
is a valid 64-bit number.This parser will behave the same as
octal
except it will ensure that the resultingBigInt
is a valid 64-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Long
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def octal8[T](implicit arg0: can_hold_8_bits[T]): Parsley[T]
This parser will behave the same as
octal
except it will ensure that the resultingBigInt
is a valid 8-bit number.This parser will behave the same as
octal
except it will ensure that the resultingBigInt
is a valid 8-bit number. The resulting number will be converted to the given typeT
, which must be able to losslessly store the parsed value; this is enforced by the constraint on the type. This accounts for unsignedness when necessary.- T
the desired type of the result, defaulting to
Byte
- Annotations
- @inline()
- Since
4.0.0
- Note
the exact behaviour of this parser is decided by the implementations given in
Lexer
, which will depend on user-defined configuration. Please see the relevant documentation of these specific objects.
- final def synchronized[T0](arg0: => T0): T0
- Definition Classes
- AnyRef
- def toString(): String
- Definition Classes
- AnyRef → Any
- final def wait(): Unit
- Definition Classes
- AnyRef
- Annotations
- @throws(classOf[java.lang.InterruptedException])
- final def wait(arg0: Long, arg1: Int): Unit
- Definition Classes
- AnyRef
- Annotations
- @throws(classOf[java.lang.InterruptedException])
- final def wait(arg0: Long): Unit
- Definition Classes
- AnyRef
- Annotations
- @throws(classOf[java.lang.InterruptedException]) @native()
This is the documentation for Parsley.
Package structure
The parsley package contains the
Parsley
class, as well as theResult
,Success
, andFailure
types. In addition to these, it also contains the following packages and "modules" (a module is defined as being an object which mocks a package):parsley.Parsley
contains the bulk of the core "function-style" combinators.parsley.combinator
contains many helpful combinators that simplify some common parser patterns.parsley.character
contains the combinators needed to read characters and strings, as well as combinators to match specific sub-sets of characters.parsley.debug
contains debugging combinators, helpful for identifying faults in parsers.parsley.extension
contains syntactic sugar combinators exposed as implicit classes.parsley.io
contains extension methods to run parsers with input sourced from IO sources.parsley.expr
contains the following sub modules:parsley.expr.chain
contains combinators used in expression parsingparsley.expr.precedence
is a builder for expression parsers built on a precedence table.parsley.expr.infix
contains combinators used in expression parsing, but with more permissive types than their equivalents inchain
.parsley.expr.mixed
contains combinators that can be used for expression parsing, but where different fixities may be mixed on the same level: this is rare in practice.parsley.implicits
contains several implicits to add syntactic sugar to the combinators. These are sub-categorised into the following sub modules:parsley.implicits.character
contains implicits to allow you to use character and string literals as parsers.parsley.implicits.combinator
contains implicits related to combinators, such as the ability to make any parser into aParsley[Unit]
automatically.parsley.implicits.lift
enables postfix application of the lift combinator onto a function (or value).parsley.implicits.zipped
enables boths a reversed form of lift where the function appears on the right and is applied on a tuple (useful when type inference has failed) as well as a.zipped
method for building tuples out of several combinators.parsley.errors
contains modules to deal with error messages, their refinement and generation.parsley.errors.combinator
provides combinators that can be used to either produce more detailed errors as well as refine existing errors.parsley.errors.tokenextractors
provides mixins for common token extraction strategies during error message generation: these can be used to avoid implementingunexpectedToken
in theErrorBuilder
.parsley.lift
contains functions which lift functions that work on regular types to those which now combine the results of parsers returning those same types. these are ubiquitous.parsley.ap
contains functions which allow for the application of a parser returning a function to several parsers returning each of the argument types.parsley.registers
contains combinators that interact with the context-sensitive functionality in the form of registers.parsley.token
contains theLexer
class that provides a host of helpful lexing combinators when provided with the description of a language.parsley.position
contains parsers for extracting position information.parsley.genericbridges
contains some basic implementations of the Parser Bridge pattern (see Design Patterns for Parser Combinators in Scala, or the parsley wiki): these can be used before more specialised generic bridge traits can be constructed.