An azimuth-based panorama UGen. It uses vector-based-amplitude panning where
the arbitrary number of speakers is supposed to be distributed in a circle with
even spacing between them. It uses an equal-power-curve to transition between
adjacent speakers. '''Note''' the different default value for the orient
argument!
Use case: To spread an multi-channel input signal across an output bus with a
different number of channels, such that the first input channel is played on the
first output channel (no spread to adjacent channels) and the last input channel
is played to the last output channel (no spread to adjacent channels), you would
create a dedicated PanAz per input channel where the pan position is
inChanIdx * 2f / (inChannels - 1) * (outChannels - 1) / outChannels .
- See also
- Companion
- class
Type members
Value members
Concrete methods
- Value Params
- in
the input signal
- level
a control rate level input (linear multiplier).
- numChannels
the number of output channels
- orient
the offset in the output channels regarding a pan position of zero. Note that ScalaCollider uses a default of zero which means that a pan pos of zero outputs the signal exactly on the first output channel. This is different in sclang where the default is 0.5 which means that a pan position of zero will output the signal between the first and second speaker. Accordingly, an
orientof1.0would result in a channel offset of one, where a pan position of zero would output the signal exactly on the second output channel, and so forth.- pos
the pan position. Channels are evenly spaced over a cyclic period of 2.0. the output channel position is
pos / 2 * numChannels + orient. Thus, assuming anorientof0.0, andnumChannelsbeing for example3, aposof0*2.0/3 == 0.0corresponds to the first output channel, aposof1*2.0/3corresponds to the second output channel, aposof2*2.0/3=4.0/3corresponds to the third and last output channel, and aposof3*2.0/3=2.0completes the circle and wraps again to the first channel. Using a bipolar pan position, such as a sawtooth that ranges from -1 to +1, all channels will be cyclically panned through. Must be control rate.- width
the width of the panning envelope. The default of 2.0 pans between pairs of adjacent speakers. Width values greater than two will spread the pan over greater numbers of speakers. Width values less than one will leave silent gaps between speakers.
- Value Params
- in
the input signal
- level
a control rate level input (linear multiplier).
- numChannels
the number of output channels
- orient
the offset in the output channels regarding a pan position of zero. Note that ScalaCollider uses a default of zero which means that a pan pos of zero outputs the signal exactly on the first output channel. This is different in sclang where the default is 0.5 which means that a pan position of zero will output the signal between the first and second speaker. Accordingly, an
orientof1.0would result in a channel offset of one, where a pan position of zero would output the signal exactly on the second output channel, and so forth.- pos
the pan position. Channels are evenly spaced over a cyclic period of 2.0. the output channel position is
pos / 2 * numChannels + orient. Thus, assuming anorientof0.0, andnumChannelsbeing for example3, aposof0*2.0/3 == 0.0corresponds to the first output channel, aposof1*2.0/3corresponds to the second output channel, aposof2*2.0/3=4.0/3corresponds to the third and last output channel, and aposof3*2.0/3=2.0completes the circle and wraps again to the first channel. Using a bipolar pan position, such as a sawtooth that ranges from -1 to +1, all channels will be cyclically panned through. Must be control rate.- width
the width of the panning envelope. The default of 2.0 pans between pairs of adjacent speakers. Width values greater than two will spread the pan over greater numbers of speakers. Width values less than one will leave silent gaps between speakers.